Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1997 - 2005 Chevrolet Venture
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3 |
| Tail Light Circuits | 5.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1997 - 2005 | Chevrolet Venture | — |
The 97-05 Chevrolet Venture CURT 4-flat Plug and Play Trailer Wiring (Part #CTW620) fits the following vehicles: 1997-2005 Chevrolet Venture. Always verify your specific year, make, and model before ordering.
Yes, the 97-05 Chevrolet Venture CURT 4-flat Plug and Play Trailer Wiring (Part #CTW620) is designed to fit the 1997-2005 Chevrolet Venture.
The 97-05 Chevrolet Venture CURT 4-flat Plug and Play Trailer Wiring (Part #CTW620) fits 1997-2005 Chevrolet Venture models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The 97-05 Chevrolet Venture CURT 4-flat Plug and Play Trailer Wiring (Part #CTW620) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55355 custom wiring harness is designed for Chevrolet Venture vans. It is also compatible with Oldsmobile Silhouette, Pontiac Montana (2007–2009 Canada only), and Pontiac Trans Sport van models. Confirm your specific model year matches one of these applications before purchasing.
No. The Curt 55355 is compatible with Pontiac Montana only for 2007–2009 models sold in Canada. US-market Montana models are not listed as compatible applications.
The Curt 55355 has two amperage ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 5.0 amps total. Do not exceed these ratings or your vehicle's tow lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating, and potential fire.
You will need a Phillips screwdriver, a flat blade screwdriver, and a panel trim removal tool. A 3/32" drill bit is also required if you need to drill a pilot hole for the ground wire screw, depending on whether a suitable existing screw with nut is available in the vehicle frame.
The manual does not specify whether the battery must be disconnected. Contact the vehicle manufacturer or Curt Manufacturing for guidance on this step.
Open the vehicle tailgate and remove the driver side storage compartment door. Remove the four plastic trim fasteners securing the storage compartment panel. Pull back on the side trim panel to locate the vehicle taillight wiring harness connectors. The connectors will be similar in appearance to those on the custom wiring harness.
If the connectors are already connected to the taillight housing, carefully separate them. Take care not to damage the locking tabs during separation. Once separated, insert the custom wiring harness end between the connectors and ensure both connectors are fully inserted with locking tabs in place.
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape. The manual does not specify alternative mounting locations if this spot is unavailable; contact Curt Manufacturing if you cannot access this area.
Only if necessary. First, locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, drill a 3/32" pilot hole. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. The area should be free of rust, dirt, and paint.
Secure the white ground wire using the ring terminal and provided screw. Attach it to a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame, or to a 3/32" pilot hole you have drilled. Ensure the grounding area is free of rust, dirt, and paint.
Route the 4-flat connector to the center of the vehicle and out of the trunk when in use. When not in use, roll it up and store it in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation. Install the provided 4-flat dust cover to help prevent corrosion. Test for proper function by using a test light or connecting a properly wired trailer.
Test for proper function by using a test light or connecting a properly wired trailer. The manual does not provide detailed testing procedures; refer to the test light manufacturer's instructions or trailer wiring documentation for specific steps.
Exceeding the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 5.0 amps total) or your vehicle's tow lamp load rating, whichever is lower, can cause loss of warranty, overheating, and potential fire. Do not exceed these limits under any circumstances.
The manual does not specify the weatherproofing rating of the 4-flat connector. It recommends installing the provided dust cover to help prevent corrosion. Contact Curt Manufacturing for detailed environmental protection specifications.
The Curt 55355 fits Chevrolet Venture, Oldsmobile Silhouette, Pontiac Trans Sport van, and Pontiac Montana 2007–2009 Canada only. Check your vehicle model against this list.
Phillips screwdriver, flat blade screwdriver, panel trim removal tool, and a 3/32" drill bit (if drilling is required for the ground wire).
Drilling is required only if no existing screw with nut is available in the vehicle frame for the ground wire. If drilling is needed, drill a 3/32" pilot hole in an area free of rust, dirt, and paint. Always check for hidden items before drilling.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 5.0 amps total. Do not exceed these ratings or your vehicle's tow lamp load rating, whichever is lower.
Exceeding the rating can cause loss of warranty, overheating, and potential fire. Do not exceed the product rating or your vehicle's tow lamp load rating, whichever is lower.
Test for proper function using a test light or by connecting a properly wired trailer. All installation steps must be followed to ensure the harness functions properly.
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 2 items:
$436.75$547.56
No reviews have been added for this product.
