ARIES TrailChaser Bumper Jeep JK Winch Reinforcement Bracket Bumper BracketARIESOriginal price was $98.95. Current price is $62.00.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2026 Jeep Gladiator
Confirmed to Fit
2018 - 2026 Jeep Wrangler
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes mounting hardware for attaching to the bumper
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: TEXTURED BLACK POWDER COAT
Material: Carbon Steel
This winch reinforcement bracket provides the added strength needed for mounting a winch on the ARIES TrailChaser front aluminum bumper for Jeep Wrangler JL and Jeep Gladiator. It is constructed from high-strength carbon steel and rated to a weight capacity of 9,500 lbs. It also features standard, slotted mounting holes to be compatible with most winches, and it comes with a durable black powder coat finish for lasting protection against the elements.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2026 | Jeep Gladiator | — |
| 2018 - 2026 | Jeep Wrangler | Will interfere with forward collision warning and adaptive cruise control systems |
The ARIES 2072102 TrailChaser Jeep Wrangler JL, Gladiator Bumper Winch Reinforcement Bracket (Part #BBDR2072102) fits the following vehicles: 2020-2026 Jeep Gladiator; 2018-2026 Jeep Wrangler. Always verify your specific year, make, and model before ordering.
The ARIES 2072102 TrailChaser Jeep Wrangler JL, Gladiator Bumper Winch Reinforcement Bracket (Part #BBDR2072102) fits 2020-2026 Jeep Gladiator models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES 2072102 TrailChaser Jeep Wrangler JL, Gladiator Bumper Winch Reinforcement Bracket (Part #BBDR2072102) is designed to fit the 2020-2026 Jeep Gladiator.
The ARIES 2072102 TrailChaser Jeep Wrangler JL, Gladiator Bumper Winch Reinforcement Bracket (Part #BBDR2072102) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one winch support bracket, four M10 carriage bolts, four M10 flat washers, four M10 lock washers, four square hole spacers, and four M10 hex nuts. All hardware is needed for installation.
The manual does not specify the vehicle make, model, year or generation. Contact ARIES Automotive at 877-287-8634 or check the product listing where you purchased it for fitment information.
You will need a ratchet, socket set, and level. The level is essential for properly aligning the bracket during installation.
Yes. The factory front bumper must be removed before installing the winch support bracket. This involves removing eight plastic push fasteners and two 5mm screws from the fascia, disconnecting the fog light wiring harness, removing four nuts on each side, and carefully lifting the bumper from the frame.
Yes, assistance is required. Step 6 explicitly states 'With assistance, hold the ARIES winch support bracket in place' while securing the hardware. At least one additional person is needed during installation.
1. Remove the front fascia (eight plastic push fasteners and two 5mm screws). 2. Disconnect the fog light wiring harness from behind the passenger side bumper. 3. Remove the four nuts on the driver side securing the factory bumper, then repeat on the passenger side. 4. Lift the factory bumper from the frame. 5. Insert two M10 carriage bolts with square hole spacers into the frame on the driver side, then repeat on the passenger side. 6. With assistance, hold the bracket in place and secure with M10 flat washers, lock washers and hex nuts at all four locations; snug but do not fully tighten. 7. Level and adjust the bracket to the desired position, then tighten all hardware to specification.
No. Step 6 instructs you to 'snug the hardware, but do not fully tighten.' Only after levelling and adjusting the bracket in Step 7 should you tighten all hardware to the recommended torque specifications.
M10 bolts must be tightened to 25 ft-lbs. This applies to all four M10 carriage bolts securing the winch support bracket.
After snugging all hardware in Step 6, use a level to check the bracket alignment. Adjust the bracket to the desired position using the level as a guide, then tighten all hardware to 25 ft-lbs for the M10 bolts.
Periodic inspections should be performed to ensure all mounting hardware remains tight. To protect the finish, wax the bracket after installation and regularly thereafter. Use only mild automotive detergent for cleaning. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or products containing abrasive materials, as these may damage the finish. For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs.
Read all instructions thoroughly before beginning. Proper tools will improve the quality of installation and reduce the time required. Ensure you have a ratchet, socket set and level available.
Yes. Step 2 requires you to disconnect the fog light wiring harness from behind the factory bumper on the passenger side before removing the bumper in Step 4.
The manual does not specify vehicle compatibility. Contact ARIES at 877-287-8634 or check your product listing.
Ratchet, socket set, and level.
Yes, the factory front bumper must be removed. This involves removing the fascia, disconnecting fog light wiring, removing bumper mounting nuts, and lifting the bumper from the frame.
Yes, assistance is required to hold the bracket in place while securing the hardware.
25 ft-lbs.
On Sale Today
Original price was $98.95. Current price is $62.00.You save $36.95 (37%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Mon, Aug 31 - Wed, Sep 2
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.