Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2026 Jeep Gladiator
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes two rear fender liners and mounting hardware
Warranty: Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
Finish: CARBIDE BLACK POWDER COAT
Material: Carbon Steel
For those who eat, sleep and breathe off-roading, ARIES fender flares show off your off-road tires better than factory flares, and they feature strong, lightweight aluminum construction to easily stand up to the elements. These rear inner fender liners are designed to mount with ARIES Gladiator JT fender flares and provide ultimate protection against mud, water and road debris. ARIES Jeep inner fender liners are constructed from welded aluminum to not only be lightweight and rust-free, but also to offer better strength than the plastic factory fender liners. They are also covered in a highly durable carbide black powder coat finish for maximum corrosion protection. ARIES rear fender liners install securely in conjunction with ARIES fender flares and include all necessary hardware for a complete installation. Jeep fender liners are also available for the front or in a complete kit for the front and rear.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2026 | Jeep Gladiator | — |
The ARIES 2500555 Black Aluminum Rear Jeep Gladiator JT Inner Fender Liner Wheel Well Guard Covers (Part #BBDR2500555) fits the following vehicles: 2020-2026 Jeep Gladiator. Always verify your specific year, make, and model before ordering.
Yes, the ARIES 2500555 Black Aluminum Rear Jeep Gladiator JT Inner Fender Liner Wheel Well Guard Covers (Part #BBDR2500555) is designed to fit the 2020-2026 Jeep Gladiator.
The ARIES 2500555 Black Aluminum Rear Jeep Gladiator JT Inner Fender Liner Wheel Well Guard Covers (Part #BBDR2500555) fits 2020-2026 Jeep Gladiator models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES 2500555 Black Aluminum Rear Jeep Gladiator JT Inner Fender Liner Wheel Well Guard Covers (Part #BBDR2500555) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one driver/left fender liner, one passenger/right fender liner, 18 M6 hex bolts, 6 M6 clip nuts, one M4 hex wrench, and a pry tool.
You need a pry tool. The kit includes an M4 hex wrench. A pry tool is required to help position and adjust the fender liners during installation.
No, professional installation is not required. The installation difficulty is rated as Easy. However, assistance is recommended, and the manual notes it may be easier to install with the vehicle raised and/or rear tire removed.
If your vehicle has aftermarket fenders previously installed, it may be necessary to temporarily remove any hardware interfering with the fender liners during installation. Check for interference before beginning installation.
The torque specification for M6 bolts is 3 ft-lbs. This applies to all M6 bolts used in the installation unless otherwise noted.
The manual indicates the factory fender liner is attached to tabs in the wheel well. The instructions reference removing factory clip nuts and sliding new clip nuts onto the mounting holes, but do not explicitly state whether complete factory liner removal is required. Consult the manufacturer or an installer for clarification on your specific vehicle.
1. Start with the driver/left side. Locate the tabs along the bottom of the wheel well above the frame. 2. Slide three M6 clip nuts onto the three inner mounting tabs. 3. Insert the fender liner into position up to the back of the inner body panel. 4. Attach the bottom to the three clip nuts with three M6 bolts (do not tighten). 5. Attach the fender liner to six factory mounting locations with six M6 bolts (do not tighten). 6. Align and adjust the fender liner, then fully tighten all hardware. 7. Repeat for the passenger/right side.
Do not tighten hardware during the initial attachment steps. After attaching all bolts to both the clip nuts and the six factory mounting locations, align and adjust the fender liner, then fully tighten all hardware at once. This allows for proper alignment before final tightening.
Yes. The manual notes it may be easier to install the fender liner with the vehicle raised up and/or rear tire removed. This is optional but recommended to improve access and installation quality.
Perform periodic inspections to ensure all hardware is secure and tight. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes, or polish/wax containing abrasives, as these may damage the finish.
Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes, or polish/wax containing abrasives. These products may damage the finish. Use only mild automotive detergent or mild soap for cleaning.
It may fit, but you may need to temporarily remove hardware interfering with the fender liners. Check for interference before installation.
A pry tool is required. The kit includes an M4 hex wrench. No power tools are mentioned as necessary.
3 ft-lbs for all M6 bolts.
No. Install all bolts loose first, then align and adjust the fender liner, then fully tighten all hardware at once.
Perform periodic inspections to ensure all hardware remains secure. Clean with mild automotive detergent only; avoid abrasives, dish detergent, and wax.
On Sale Today
Original price was $493.95. Current price is $240.00.You save $253.95 (51%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
