CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$59.15In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1998 - 2005 Volkswagen Passat
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 40
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Volkswagen Passat (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1998 - 2005 | Volkswagen Passat | Drilling Required Fascia Trimming: Yes (minor) Installation Time: 30-60 minutes Visibility: Exposed |
Yes, the CURT 11054 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volkswagen Passat (Part #BKDK11054) is designed to fit the 1998-2005 Volkswagen Passat.
The CURT 11054 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volkswagen Passat (Part #BKDK11054) fits 1998-2005 Volkswagen Passat models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 11054 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volkswagen Passat (Part #BKDK11054) fits the following vehicles: 1998-2005 Volkswagen Passat. Always verify your specific year, make, and model before ordering.
The CURT 11054 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volkswagen Passat (Part #BKDK11054) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Part 11054 fits 1998–2005 Volkswagen Passat Sedan and Wagon models, except 4Motion. If your Passat is a 4Motion model, this hitch is not compatible.
No. The Curt 11054 is not designed for 4Motion Passat models. It is compatible only with standard Sedan and Wagon models from 1998–2005.
The Curt 11054 is designed for use with ballmount #55001 or #45501.
The kit includes four 1/2"-13 UNC grade 8 bolts (part 10-10272), four 1/2"-13 UNC grade 8 serrated flange nuts (part 20-00062), four 0.250 × 1.50 × 3.00" square hole spacers (part CM-SP4), and two 1/2" fishwires (part 1_2 FISHWIRE).
Required tools are: socket wrench, 3/4" socket, 10mm socket, Torx head T-25 bit, Torx head T-27 bit, torque wrench, drill, and 17/32" drill bit. Silicone sealant is also required.
Yes. The first installation step is to remove the spare tire from the vehicle.
Yes. Drilling is required. You must drill a 17/32" hole in the trunk pan and two holes in the vehicle bumper beam. A 17/32" drill bit is required.
Yes. Fascia trimming is required on the passenger side to clear the hitch bumper bracket. The manual notes this as a required modification.
1. Remove spare tire and plug from trunk pan. 2. Remove plastic cover on passenger side and return to owner. 3. Center hitch and trim passenger side fascia. 4. Secure hitch through existing hole with 1/2" hardware and CM-SP4 spacer; drill 17/32" hole in trunk pan and install remaining hardware. 5. Drill two holes in bumper beam and secure with 1/2" hardware and CM-SP4 spacers (wagon models require fishwiring bumper hardware through bumper ends). 6. Torque all 1/2" hardware to 110 lb-ft and seal trunk pan holes with silicone sealant. 7. Return spare tire.
Yes. The CM-SP4 spacers (0.250 × 1.50 × 3.00" square hole spacers) are used with the 1/2" hardware. Four spacers are included in the kit and are installed at the trunk pan hole and bumper beam holes.
Fishwiring is required only for Wagon models. The manual notes that wagon models require fishwiring bumper hardware through the ends of the bumper. Sedan models do not require this step.
All 1/2" hardware must be torqued to 110 lb-ft.
Yes. After torquing all 1/2" hardware to 110 lb-ft, seal the trunk pan holes with silicone sealant to prevent water intrusion.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is an ongoing maintenance requirement.
The manual does not specify the gross load capacity or towing weight limit. You must not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt Manufacturing technical support at 877-287-8634 for capacity specifications.
Non-trailer loads may be applied to this hitch only if they are supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
The warranty is voided by: alteration to the product, misuse, improper installation, or failure to properly support non-trailer loads with auxiliary stabilizing straps.
Yes, if it is a 1998–2005 Sedan or Wagon. No, if it is a 4Motion model.
Yes. You must drill a 17/32" hole in the trunk pan and two holes in the bumper beam. Fascia trimming on the passenger side is also required.
Socket wrench, 3/4" and 10mm sockets, Torx T-25 and T-27 bits, torque wrench, drill, 17/32" drill bit, and silicone sealant.
Torque all 1/2" hardware to 110 lb-ft.
Yes, remove the spare tire first. It is reinstalled after the hitch installation is complete.
The manual does not specify capacity. Do not exceed your vehicle manufacturer's recommended towing capacity. Call Curt technical support at 877-287-8634 for specifications.
On Sale Today
Original price was $303.95. Current price is $282.05.You save $21.90 (7%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$430.62$452.52
No reviews have been added for this product.
