Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2016 Audi A4
Confirmed to Fit
2009 - 2016 Audi A4 Quattro
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Audi A4 and A4 Quattro (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94942 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2009 - 2016 | Audi A4 | Sedan | No Drilling Required Fascia Trimming: Yes Installation Time: 30-60 minutes Visibility: Concealed |
| 2009 - 2016 | Audi A4 Quattro | Sedan | No Drilling Required Fascia Trimming: Yes Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 111863 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Audi A4, Quattro (Part #BKDK111863) fits the following vehicles: 2009-2016 Audi A4; 2009-2016 Audi A4 Quattro. Always verify your specific year, make, and model before ordering.
The CURT 111863 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Audi A4, Quattro (Part #BKDK111863) fits 2009-2016 Audi A4 models. The 2016 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 111863 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Audi A4, Quattro (Part #BKDK111863) is designed to fit the 2009-2016 Audi A4.
The CURT 111863 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Audi A4, Quattro (Part #BKDK111863) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The manual does not provide the specific hitch weight or gross load capacity values for this model. Contact Curt Manufacturing technical support at 1-800-798-0813 for these specifications.
Yes, Curt part number 11186 is designed for the Audi A4 Sedan. The hitch is designed for use with ballmount part numbers 55001 or 45501.
The Curt 11186 is designed for use with ballmount part numbers 55001 or 45501.
You must not exceed your vehicle manufacturer's recommended towing capacity. Curt Manufacturing does not override the Audi A4 Sedan's factory towing limits. Consult your vehicle's owner manual or contact your Audi dealer for the specific towing capacity.
Non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. Do not rely on the hitch alone to carry cargo.
Required tools are: T-25 Torx driver, 3/4" socket, swivel extension, 12" extension, ratchet, rotary cutting tool, torque wrench, and silicone caulk.
The parts list includes: 2 bolt plates (CM-11186-BP), 4 carriage bolts 1/2-13 x 4 1/2", 6 hex flange nuts (HFN 1213), 2 carriage bolts 1/2-13 x 1 3/4", and 2 spacer plates 0.250" (CM-SP62).
Remove the spare tire and jack from inside the trunk. These must be reinstalled after hitch installation is complete.
No drilling is required. However, fascia trimming is required. You must use a rotary cutting tool to remove material from the lower part of the plastic bumper fascia as shown in the Fascia Trim Detail diagram.
The trim area is 3 1/4" wide and extends from the lower part of the plastic fascia. The centerline of the vehicle is 2.25" from the trim area. Use the Fascia Trim Detail diagram as a guide when using the rotary cutting tool.
1. Remove 3 screws holding the plastic bumper fascia. 2. Remove spare tire and jack. 3. Remove 2 rearmost plastic drain plugs from trunk pan. 4. Use rotary cutting tool to trim fascia material. 5. Install bolt plates and long carriage bolts on bumper support tubes. 6. Raise hitch into position and loosely secure with hex flange nuts. 7. Seal drain holes with silicone caulk and install spacer plates with short carriage bolts. 8. Torque all 1/2" hardware to 110 ft-lbs. 9. Reinstall outer fascia screws. 10. Reinstall jack and spare tire.
Install the bolt plates and 1/2-13 x 4 1/2" long carriage bolts on top of the bumper support tubes. While gently pulling the fascia down and rearward, align the slots in the hitch brackets with the long carriage bolts and loosely secure with hex flange nuts.
The 0.250" spacer plates (CM-SP62) are inserted into the drain holes in the trunk pan along with 1/2-13 x 1 3/4" carriage bolts. They are secured from below with hex flange nuts after the drain holes are sealed with silicone caulk.
All 1/2" hardware must be torqued to 110 ft-lbs. This includes the 1/2-13 x 4 1/2" carriage bolts and the 1/2-13 x 1 3/4" carriage bolts.
Loosely secure the hitch with hex flange nuts during initial positioning (Step 6). After all components are in place and the drain holes are sealed, torque all 1/2" hardware to 110 ft-lbs in Step 8.
After removing the 2 rearmost plastic drain plugs, seal the drain holes with silicone caulk. Then insert a CM-SP62 spacer plate and 1/2-13 x 1 3/4" carriage bolt into each drain hole and secure from below with hex flange nuts.
Yes. After torquing all hitch hardware to 110 ft-lbs, reinstall the two outer screws through the bumper fascia and into the trunk pan.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. Regular inspection helps maintain the hitch's integrity and safety.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
Yes, the Curt 11186 is designed for the Audi A4 Sedan and works with ballmounts 55001 or 45501.
No drilling is required, but fascia trimming is required using a rotary cutting tool to remove material from the lower plastic bumper fascia.
You need a T-25 Torx driver, 3/4" socket, swivel extension, 12" extension, ratchet, rotary cutting tool, torque wrench, and silicone caulk.
All 1/2" hardware must be torqued to 110 ft-lbs.
Non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound.
Total for 5 items:
$416.56$545.52
On Sale Today
Original price was $396.95. Current price is $267.99.You save $128.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.