CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$59.15In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2017 Nissan JUKE
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Juke (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2017 | Nissan JUKE | Drilling Required Installation Time: 30-60 minutes Except Nismo Visibility: Exposed |
The CURT 11302 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Juke (Part #BKDK11302) fits the following vehicles: 2011-2017 Nissan JUKE. Always verify your specific year, make, and model before ordering.
The CURT 11302 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Juke (Part #BKDK11302) fits 2011-2017 Nissan JUKE models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 11302 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Juke (Part #BKDK11302) is designed to fit the 2011-2017 Nissan JUKE.
The CURT 11302 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Juke (Part #BKDK11302) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 11302 is designed for 2011 Nissan Juke FWD models. However, it does not fit NISMO variants. Confirm your vehicle is FWD and not NISMO before purchasing.
No. CURT part number 11302 is designed for 2011 Nissan Juke FWD models excluding NISMO. NISMO variants are not compatible with this hitch.
The CURT 11302 has a gross load capacity of 2000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
Required tools include: torque wrench, ratchet, 3/4" socket, die grinder, pry bar, and safety glasses. Proper tools will greatly improve the quality of the install and reduce installation time.
Yes. The first installation step is to lower the vehicle exhaust by removing the rubber isolator from the muffler. This provides access to the mounting holes. After installation is complete, the exhaust is raised back into position.
No drilling is required. However, you must enlarge an existing hole under the driver side frame rail from its current size to 1" using a die grinder. This enlargement provides access to the attachment holes.
Two people may be required to ease installation. While one person may be able to complete the installation, having a second person will help, particularly when raising the hitch into position.
All 1/2" fasteners must be torqued to 110 ft.-lbs. This applies to the carriage bolts and flange nuts used to secure the hitch to the frame and tow loop.
The fishwire tool is used to thread the 1 3/4" carriage bolts with CM-SP6 spacers through the access hole and out through the mounting holes. The fishwires are then removed once the hitch is raised into position and the bolts are secured with flange nuts.
Two types of spacers are used: CM-SP6 (.250 x 1.00 x 3.00") and CM-SP12 (.250 x 1.00 x 2.00"). The CM-SP6 spacers are placed with the 1 3/4" carriage bolts during fishwiring. The CM-SP12 spacer is placed on the bottom of the tow loop under the 2" carriage bolt.
If the exhaust hanger rod interferes with the side bracket, it may be necessary to bend the hanger rod slightly inboard. This is noted as a potential adjustment during the installation process.
The CURT 11302 is designed for use with ballmount #D-20/45520. Euro mount options are also available: #45561 (1 7/8" ball) and #45562 (2" ball).
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. Regular inspection will help maintain the integrity and safety of the installation.
Safety glasses should be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Yes, the CURT 11302 is designed for 2011 Nissan Juke FWD models (excluding NISMO).
2000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Torque wrench, ratchet, 3/4" socket, die grinder, pry bar, and safety glasses.
No drilling required, but you must enlarge an existing hole under the driver side frame rail to 1" using a die grinder for access.
Yes, lower the exhaust by removing the rubber isolator from the muffler before installation. Raise it back after installation is complete.
All 1/2" fasteners must be torqued to 110 ft.-lbs.
Non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $355.95. Current price is $240.99.You save $114.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$389.56$504.52
No reviews have been added for this product.
