Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2011 Ford Focus
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 40
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Ford Focus (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2011 | Ford Focus | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 113193 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Focus (Part #BKDK113193) fits 2008-2011 Ford Focus models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 113193 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Focus (Part #BKDK113193) is designed to fit the 2008-2011 Ford Focus.
The CURT 113193 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Focus (Part #BKDK113193) fits the following vehicles: 2008-2011 Ford Focus. Always verify your specific year, make, and model before ordering.
The CURT 113193 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Focus (Part #BKDK113193) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Part number 11319 is designed for Ford Focus S, SE, and SES models in both coupe and sedan body styles. The manual does not specify model years, so contact Curt Manufacturing or consult a fitment database to confirm your specific year is compatible.
The hitch has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch weighs 27 lbs.
The hitch is designed for use with ballmount #55001 or #45501.
Yes. The first installation step requires you to lower the exhaust from the vehicle by unhooking the 3 rear rubber hangers. The exhaust is then raised and the rubber hangers are re-installed after the hitch is secured.
Yes. You must pierce the heat shield just below the existing hole in the frame rail using a screwdriver or pointed tool, and enlarge it to approximately 1/2 inch to allow the carriage bolt to pass through.
Fishwiring is a technique used to thread fasteners through the end of the frame rail. For the Curt 11319, you use 1/2-inch fishwire to thread the 1/2-inch carriage bolts and spacers through the end of the frame rail into position before installing the brackets. This allows the bolts to be positioned correctly before the hitch is raised into place.
Required tools are: Phillips head screwdriver, 3/8-inch drive ratchet, 3/8-inch drive torque wrench, 3/4-inch and 3/8-inch drive short socket, 11/16-inch and 3/8-inch drive socket, 9/16-inch and 3/8-inch drive socket, 5/8-inch boxed end wrench, and 9/16-inch boxed end wrench.
Torque all 1/2-inch fasteners to 110 lb-ft, all 7/16-inch fasteners to 70 lb-ft, and all 3/8-inch fasteners to 45 lb-ft.
The kit includes: one 1/2-inch fishwire, two 3/8-inch x 1.5-inch hex bolts with 3/8-inch washers and hex flange nuts, two 7/16-inch x 1.5-inch hex bolts with 7/16-inch washers and hex flange nuts, two 1/2-inch x 1.5-inch carriage bolts with hex flange nuts, two 0.25 x 1.00 x 3.00-inch square hole spacers, one 0.375-inch passenger side bracket, and one 0.375-inch driver side bracket.
First, fishwire the 1/2-inch carriage bolts and spacers through the end of the frame rail. Then install the passenger and driver side brackets over the fishwired bolts and install the flange nuts finger tight. Raise the hitch into position, align the brackets and vehicle flange holes with the hitch, and install the remaining fasteners. Finally, torque all fasteners to specification.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
The Curt 11319 is designed for Ford Focus S, SE, and SES coupes and sedans. Confirm your specific model year with Curt or a fitment database.
2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required. You must pierce and enlarge the heat shield to approximately 1/2 inch using a screwdriver or pointed tool.
A 3/8-inch drive torque wrench, ratchet, sockets (3/4, 11/16, 9/16 inch), boxed end wrenches (5/8, 9/16 inch), and a Phillips head screwdriver.
1/2-inch fasteners: 110 lb-ft; 7/16-inch fasteners: 70 lb-ft; 3/8-inch fasteners: 45 lb-ft.
Ballmount #55001 or #45501.
Periodically check that all fasteners are tight and all structural components are sound.
Total for 5 items:
$432.57$568.53
On Sale Today
Original price was $417.95. Current price is $281.99.You save $135.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Fife, WAFREE SHIPPING
Estimated delivery Fri, Sep 18 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.