CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2012 Nissan Sentra
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Flat
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Sentra (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2012 | Nissan Sentra | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
Yes, the CURT 11370 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Sentra (Part #BKDK11370) is designed to fit the 2007-2012 Nissan Sentra.
The CURT 11370 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Sentra (Part #BKDK11370) fits 2007-2012 Nissan Sentra models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 11370 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Sentra (Part #BKDK11370) fits the following vehicles: 2007-2012 Nissan Sentra. Always verify your specific year, make, and model before ordering.
The CURT 11370 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Nissan Sentra (Part #BKDK11370) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The manual specifies a gross load capacity of 2,000 lbs. trailer weight and 200 lbs. tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your Nissan Sentra 2.0 owner's manual for the final towing limit.
Yes, the Curt 11370 is designed for the Nissan Sentra 2.0. Installation requires removal of the spare tire, enlargement of two holes in the bumper beam, and fishwiring of carriage bolts through the bumper beam to the hitch plate.
The Curt 11370 is designed for use with ball mount #D-20 / 45520, euro ball mount 45561 (1 7/8" ball), or euro ball mount 45562 (2" ball).
The kit includes: 2× 1/2-13 UNC carriage bolts (1-1/2" long, Grade 8), 2× 7/16-14 UNC carriage bolts (1" long, Grade 8), 2× 0.250 x 1.00 x 2.00" square hole spacers, 2× 7/16-14 UNC serrated flange nuts, 2× 1/2-13 UNC serrated flange nuts, and 2× 7/16" fishwire.
Yes. Step 1 of the installation requires you to remove the spare tire from the trunk and remove the rubber plugs. The spare tire is reinstalled in step 7 after the hitch is secured.
Yes. Step 3 requires you to enlarge two holes in the bumper beam that line up with the outer two holes in the hitch plate. The manual notes "Hole Enlargement Required for Install." This is a permanent modification to the vehicle.
Yes, fishwiring is required. Step 4 specifies that you must fishwire (thread) 2× 7/16" carriage bolts with SP7 spacers from the end of the bumper beam through to the enlarged holes in the bumper beam. This allows the bolts to pass through the bumper structure to secure the hitch plate.
Torque all 7/16" hardware (carriage bolts and flange nuts) to 59 ft.-lb. Torque all 1/2" hardware (carriage bolts and flange nuts) to 110 ft.-lb. These values apply in step 6 after the hitch is raised into position and finger-tightened.
1. Remove spare tire and rubber plugs from trunk. 2. Install trunk pan spacer with 2× 1/2" carriage bolts. 3. Enlarge two holes in bumper beam that align with outer two holes in hitch plate. 4. Fishwire 2× 7/16" carriage bolts with SP7 spacers from bumper beam end to enlarged holes. 5. Raise hitch into position and finger-tighten with 2× 1/2" and 2× 7/16" flange nuts. 6. Torque all 7/16" hardware to 59 ft.-lb. and all 1/2" hardware to 110 ft.-lb. 7. Return spare tire to trunk.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a retorque interval or maintenance schedule beyond this periodic inspection.
Curt Manufacturing warrants the product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, the Curt 11370 is designed for the Nissan Sentra 2.0. Installation requires spare tire removal, hole enlargement in the bumper beam, and fishwiring of bolts.
The kit includes 2× 1/2" carriage bolts, 2× 7/16" carriage bolts, 2× square hole spacers, 4 flange nuts (2× 1/2", 2× 7/16"), and 2× 7/16" fishwire.
Torque 7/16" hardware to 59 ft.-lb. and 1/2" hardware to 110 ft.-lb.
Compatible with ball mount #D-20 / 45520, euro ball mount 45561 (1 7/8" ball), or 45562 (2" ball).
Gross load capacity is 2,000 lbs. trailer weight and 200 lbs. tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $313.95. Current price is $212.99.You save $100.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$363.57$464.53
No reviews have been added for this product.
