CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$59.15In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2014 - 2019 Mini Cooper
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Uses pre-existing vehicle hardware for installation
Available from Eau Claire, WI and Brampton, ON distribution centers only
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 60
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Mini Cooper (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2014 - 2019 | Mini Cooper | Hatchback | No Drilling Required Installation Time: 60-90 minutes Except with spare tire Visibility: Concealed |
Yes, the CURT 11417 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Mini Cooper (Part #BKDK11417) is designed to fit the 2014-2019 Mini Cooper.
The CURT 11417 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Mini Cooper (Part #BKDK11417) fits the following vehicles: 2014-2019 Mini Cooper. Always verify your specific year, make, and model before ordering.
The CURT 11417 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Mini Cooper (Part #BKDK11417) fits 2014-2019 Mini Cooper models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 11417 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Mini Cooper (Part #BKDK11417) Drilling is not required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
The part number is 11417. This hitch is designed specifically for the 2015 MINI Cooper 2 Door Hatchback.
The CURT 11417 is designed for the 2015 MINI Cooper 2 Door Hatchback only. Compatibility with other model years or body styles is not confirmed in the manual. Contact CURT technical support at 877-287-8634 to verify fitment for your specific vehicle.
The hitch is rated for a maximum trailer weight of 2,000 lbs and a tongue weight of 200 lbs when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer (wheel-less) loads can be applied to this hitch only if they are supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on the stabilizing straps.
The hitch is designed for use with CURT ballmount #45521. Euro mount options are available: #45571 (1 7/8" ball) and #45572 (2" ball).
Required tools are: 8mm socket, 10mm socket, 18mm socket, 6" extension, ratchet, and torque wrench. Safety glasses should be worn at all times during installation.
No drilling is required. The hitch uses existing vehicle studs and fasteners for installation.
Yes, heat shield trimming is required. The heat shield must be trimmed using the trim diagram provided in the manual. The trim line is marked 2.50 inches from the bend line, and material beyond this line should be removed before reinstalling the heat shield.
Two people may be required to ease installation, though the manual does not state this is mandatory. If you are hesitant to undertake the installation on your own, contact an authorized CURT installer for additional assistance.
The M12-1.5 nuts securing the bumper beam must be torqued to 79 ft-lbs.
Follow these steps in order: 1) Remove chrome trim. 2) Remove three screws from each light. 3) Open the panel inside the car and remove the bulb assembly by squeezing plastic clips and pulling away from the tail light housing. 4) Release the three plastic tabs holding the tail light housing and remove from the vehicle.
Pull the fender flair away from the bumper cover to access the hidden fastener. Release the side marker bulb from the fender flair first. Use an offset Phillips screwdriver or a wrench with a Phillips drive bit to remove the hidden fastener. Repeat this process for the other side.
Save the four M12-1.5 nuts that secure the bumper beam. These nuts are removed in Step 4 and must be reinstalled in Step 6 to secure the bumper beam after the hitch is positioned.
After raising the hitch into position over the bumper beam studs: 1) Reinstall the plastic bumper support. 2) Reinstall the bumper beam and secure with the M12 nuts (torqued to 79 ft-lbs). 3) Reinstall the bumper cover by reversing the removal steps (Steps 1-3).
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is critical to safe operation.
Safety glasses should be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse, or improper installation voids the warranty.
The CURT 11417 is designed for the 2015 MINI Cooper 2 Door Hatchback only. Verify your vehicle year and body style match before purchasing.
Maximum trailer weight is 2,000 lbs and tongue weight is 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes. Required tools are 8mm, 10mm, and 18mm sockets, a 6" extension, ratchet, and torque wrench. No drilling is required, but heat shield trimming is.
The M12-1.5 bumper beam nuts must be torqued to 79 ft-lbs.
Designed for ballmount #45521. Euro mount options: #45571 (1 7/8" ball) and #45572 (2" ball).
Two people may be required. If hesitant, contact an authorized CURT installer.
On Sale Today
Original price was $396.95. Current price is $371.33.You save $25.62 (6%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$519.90$545.52
No reviews have been added for this product.
