CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2016 Scion iA
Confirmed to Fit
2017 - 2018 Toyota Yaris iA
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Toyota Yaris iA and Scion iA (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94942 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 | Scion iA | No Drilling Required Hole Enlargement - Installation Time: 30-60 minutes Visibility: Exposed |
| 2017 - 2018 | Toyota Yaris iA | No Drilling Required Hole Enlargement - Installation Time: 30-60 minutes Visibility: Exposed |
Yes, the CURT 11421 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Toyota Yaris iA, Scion iA (Part #BKDK11421) is designed to fit the 2016 Scion iA.
The CURT 11421 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Toyota Yaris iA, Scion iA (Part #BKDK11421) fits 2016 Scion iA models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 11421 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Toyota Yaris iA, Scion iA (Part #BKDK11421) fits the following vehicles: 2016 Scion iA; 2017-2018 Toyota Yaris iA. Always verify your specific year, make, and model before ordering.
The CURT 11421 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Toyota Yaris iA, Scion iA (Part #BKDK11421) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT hitch 11421 is designed for 2016-Present Scion iA and Toyota Yaris iA sedans. Verify your vehicle matches this model and body style before purchasing.
The hitch is rated for a maximum trailer weight of 2000 lbs and tongue weight of 200 lbs when used as a weight-carrying hitch. Never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer (wheel-less) loads can be applied to this hitch only if they are supported by CURT 18050 stabilizing straps. Failure to use stabilizing straps for non-trailer loads will void the product warranty. Consult the CURT catalog or www.curtmfg.com for stabilizing strap information.
CURT hitch 11421 is designed for use with ball mount #45520. Euro mount options are available: #45561 (1 7/8" ball) and #45562 (2" ball).
Required tools are: 11/16" socket, 6" socket extension, ratchet, torque wrench, die grinder, panel removal tool, and safety glasses. A die grinder is needed to enlarge the access hole on the passenger side frame rail.
The kit includes: 4× 7/16-14 UNC carriage bolts (part 10-10282), 4× .250 x 1.00 x 2.50" square hole spacers (CM-SP11), 4× 7/16-14 UNC serrated flange nuts (part 20-00103), and 4× 7/16" fishwires (part 7_16 FISHWIRE).
Yes. Step 1 requires disconnecting three electrical harness pins from the driver side frame rail using a panel removal tool. The harness is reconnected in step 6 through the clearance hole on the driver side frame rail after the hitch is secured.
No drilling is required. However, the access hole on the passenger side frame rail must be enlarged using a die grinder to allow 7/16" carriage bolts and CM-SP11 spacers to pass through. The driver side frame rail uses existing holes.
Fishwires are used to guide the 7/16" carriage bolts and spacers through the frame rail access holes and mounting holes. The fishwires are attached to the bolts, pulled through the holes to guide them into position, then removed before the flange nuts are installed. Keep fishwires attached to prevent loss into the frame rails.
Two people may be required to ease installation. While one person may be able to complete the installation, having a second person will improve the quality of the install and reduce installation time.
All 7/16" hardware (carriage bolts and flange nuts) must be torqued to 70 ft-lbs. Use a torque wrench to ensure proper tightening.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task, contact an authorized CURT installer for assistance. Technical support is available at 877.287.8634.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. Liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
CURT 11421 fits 2016-Present Scion iA and Toyota Yaris iA sedans only. Verify your exact year and model before purchasing.
Maximum trailer weight 2000 lbs, tongue weight 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling required. You must enlarge the passenger side frame rail access hole with a die grinder to fit the 7/16" bolts and spacers.
11/16" socket, 6" socket extension, ratchet, torque wrench, die grinder, panel removal tool, and safety glasses.
All 7/16" bolts and nuts must be torqued to 70 ft-lbs.
You must disconnect three electrical harness pins from the driver side frame rail before installation using a panel removal tool. Reconnect after securing the hitch.
On Sale Today
Original price was $396.95. Current price is $371.33.You save $25.62 (6%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$521.91$547.53
No reviews have been added for this product.
