CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$59.15In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2004 Volvo S40
Confirmed to Fit
2005 - 2011 Volvo S40
Confirmed to Fit
2005 - 2011 Volvo V50
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Volvo S40 and V50 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94943 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2004 | Volvo S40 | — | No Drilling Required Installation Time: 30-60 minutes 4th Digit of VIN is "M" Visibility: Concealed |
| 2005 - 2011 | Volvo S40 | — | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 2005 - 2011 | Volvo V50 | Wagon · 4-Door | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 11438 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volvo S40, V50 (Part #BKDK11438) fits 2004-2011 Volvo S40 models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 11438 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volvo S40, V50 (Part #BKDK11438) fits the following vehicles: 2004-2011 Volvo S40; 2005-2011 Volvo V50. Always verify your specific year, make, and model before ordering.
Yes, the CURT 11438 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volvo S40, V50 (Part #BKDK11438) is designed to fit the 2004-2011 Volvo S40.
The CURT 11438 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Volvo S40, V50 (Part #BKDK11438) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt hitch 11438 is designed for the Volvo S40 / V50 Wagon. The hitch is available under part numbers 249438 or 247438.
The manual does not specify the tongue weight capacity. Contact Curt Manufacturing technical support at 877-287-8634 for this specification.
The manual does not specify the trailer weight capacity. Contact Curt Manufacturing technical support at 877-287-8634 for this specification.
The Curt 11438 hitch is designed for use with ball mount D-221.
No, drilling is not required. The hitch uses existing vehicle attachment points on the frame rails and tie-down brackets.
You do not need to fully remove the exhaust, but you must lower it. The first installation step is to lower the exhaust by removing two M8 bolts from each side. These bolts should be discarded. You will also need to bend the tabs on the exhaust bracket to allow clearance for the hitch.
The hitch includes: four M8 × 40 mm hex head cap screws (part 10-10417), two 1/2-13 UNC × 1-3/4" hex head cap screws (part 10-10370), two 0.250 × 1.00 × 1.50" round hole spacers (part CM-SP50), two 1/2-13 UNC serrated flange nuts (part 20-00062), four 5/16" lock washers (part 30-00219), and four 5/16" flat washers (part 30-00195).
1. Lower the exhaust by removing two M8 bolts from each side and discard them. Bend the tabs on the exhaust bracket for hitch clearance. 2. Raise the hitch into position and loosely install the M8 × 40 mm bolts with 5/16" conical washers, sandwiching the hitch side bracket between the frame rail and exhaust hanger bracket. 3. Install the 1/2" fasteners through the hitch side brackets and vehicle tie-down bracket. 4. Torque all M8 fasteners to 23 lb-ft and all 1/2" fasteners to 110 lb-ft.
All M8 fasteners must be torqued to 23 lb-ft.
All 1/2" fasteners must be torqued to 110 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself has a gross load capacity, but you must follow Volvo's specifications for your S40 or V50 Wagon.
Non-trailer loads may be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a retorque interval; contact Curt Manufacturing at 877-287-8634 for detailed maintenance recommendations.
The manual does not specify which tools are required. Contact Curt Manufacturing technical support at 877-287-8634 for a complete tool list.
The manual does not address battery disconnection. Contact Curt Manufacturing technical support at 877-287-8634 for safety guidance.
The manual indicates that both professional and DIY installation are possible, but does not provide estimated installation times. For guidance on whether you should use professional installation, contact Curt Manufacturing at 877-287-8634.
Yes, the Curt 11438 (part numbers 249438 or 247438) is designed for Volvo S40 / V50 Wagons.
No drilling is required. The hitch uses existing vehicle attachment points.
Yes. You must lower the exhaust by removing two M8 bolts from each side (discard them) and bend the tabs on the exhaust bracket to allow hitch clearance.
Torque M8 fasteners to 23 lb-ft and 1/2" fasteners to 110 lb-ft.
The Curt 11438 is designed for use with ball mount D-221.
Curt Manufacturing warrants the hitch to be free of defects in material and workmanship at retail purchase. Alteration, misuse, or improper installation voids the warranty. Non-trailer loads must be supported by auxiliary stabilizing straps or warranty is void.
On Sale Today
Original price was $428.95. Current price is $399.37.You save $29.58 (7%)
Free Shipping
Ships free on all orders
Authorized Dealer
Total for 5 items:
$547.94$577.52
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
