Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2017 Mitsubishi Lancer
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Installation requires hole enlargement and fishwiring of hardware
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Mitsubishi Lancer (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2017 | Mitsubishi Lancer | No Drilling Required Installation Time: 30-60 minutes Excluding Fore to AFT Mufflers Visibility: Concealed |
The CURT 114793 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Mitsubishi Lancer (Part #BKDK114793) fits the following vehicles: 2008-2017 Mitsubishi Lancer. Always verify your specific year, make, and model before ordering.
The CURT 114793 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Mitsubishi Lancer (Part #BKDK114793) fits 2008-2017 Mitsubishi Lancer models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 114793 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Mitsubishi Lancer (Part #BKDK114793) is designed to fit the 2008-2017 Mitsubishi Lancer.
The CURT 114793 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Mitsubishi Lancer (Part #BKDK114793) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 11479 is designed for Mitsubishi Lancer DE, ES, SE, and GT models (including Sportback) from 2008-present. It fits all trim levels of these model years.
The hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch is designed for use with ballmount #D-55001 or #45501. A Euro mount option is also available: #45571 (1-7/8" ball) or #45572 (2" ball).
You will need: ratchet, 3/4" socket, 15/16" socket, 10" extension, die grinder with carbide bit, torque wrench, and access to the vehicle's tow loop/tie-down. Safety glasses must be worn at all times during installation.
The manual states that 2 people may be required to ease installation. If you are hesitant to undertake this task on your own, CURT recommends contacting an authorized CURT installer for additional assistance. You can call technical support at 800.798.0813 for help.
Yes. Using a die grinder with a carbide bit, you must enlarge the access hole to allow the carriage bolts and spacers to fit through. This is the first installation step.
Fishwire is a fastening method used in this installation. The 1/2" bolts and spacers are fishwired into the frame rail as shown in the installation diagram. Two pieces of 1/2" fishwire (part number 1_2 FISHWIRE) are included in the parts list.
Torque all 5/8" fasteners to 210 lb-ft. Torque all 1/2" fasteners to 110 lb-ft.
The parts list includes: 2 carriage bolts 1/2-13 x 1 1/4 (part 1), 2 square hole spacers .250 x 1.00 x 3.00" CM-SP6 (part 2), 2 hex flange nuts HFN 1213 (part 3), 2 pieces of 1/2" fishwire (part 4), 1 carriage bolt 5/8-11 x 2 (part 5), 1 hex flange nut 5/8-11 (part 6), and 1 spacer .250" CM-11479-SP (part 7).
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. Using proper tools will greatly improve the quality of the install and reduce the time required.
All non-trailer loads applied to this product must be supported by auxiliary stabilizing straps. CURT recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This is critical for safe operation.
CURT Manufacturing LLC warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse, or improper installation voids the warranty.
Call CURT technical support at 800.798.0813. For more information, visit www.curtmfg.com. For helpful towing tips, visit www.hitchinfo.com.
Yes, it fits Lancer DE, ES, SE, and GT models (including Sportback) from 2008-present.
2,000 lbs trailer weight and 200 lbs tongue weight maximum. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes. You must use a die grinder with carbide bit to enlarge the access hole for the carriage bolts and spacers.
5/8" fasteners: 210 lb-ft. 1/2" fasteners: 110 lb-ft.
Ratchet, 3/4" and 15/16" sockets, 10" extension, die grinder with carbide bit, torque wrench, and safety glasses.
Only with auxiliary stabilizing straps (CURT 18050 recommended). Failure to use straps voids the warranty.
On Sale Today
Original price was $396.95. Current price is $267.99.You save $128.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$416.56$545.52
No reviews have been added for this product.