CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2018 - 2022 Honda Accord
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires drilling, heat shield trimming and temporary lowering of exhaust
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 60
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Accord (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2022 | Honda Accord | Drilling Required Exhaust: Temporarily Lower Exhaust Heat Shield: Exhaust Heat Shield Trimming Required Installation Time: 60-90 minutes Muffler: Temporarily Remove Driver Side Muffler Visibility: Exposed |
On Sale Today
Original price was $331.95. Current price is $224.99.You save $106.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
The CURT 11525 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda Accord (Part #BKDK11525) fits 2018-2022 Honda Accord models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 11525 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda Accord (Part #BKDK11525) is designed to fit the 2018-2022 Honda Accord.
The CURT 11525 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda Accord (Part #BKDK11525) fits the following vehicles: 2018-2022 Honda Accord. Always verify your specific year, make, and model before ordering.
The CURT 11525 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Honda Accord (Part #BKDK11525) Drilling is required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
Yes, the CURT 11525 is designed for 2018-present Honda Accord Sedan models. It is a weight-carrying hitch with a maximum trailer weight capacity of 2,000 lbs and tongue weight capacity of 200 lbs. Always verify your vehicle's manufacturer towing capacity before towing.
The CURT 11525 has a maximum trailer weight capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Required tools are: torque wrench, ratchet, safety glasses, 11/16", 10mm and 14mm sockets, die grinder or aviation shears, tape measure, and marker. A power drill with 1/2" drill bit is also needed for drilling mounting holes.
Two people may be required to ease installation. The manual rates this as a moderate to challenging installation. If you are hesitant to undertake this task, contact an authorized CURT installer for assistance. Technical support is available at 877-287-8634.
Yes, drilling is required. You must drill two 1/2" mounting holes in both frame rails. The hitch is used to mark the rearward mounting hole locations, which are then drilled and enlarged to accommodate the fishwire hardware.
Yes, heat shield trimming is required. Remove the rearward most screw in the heat shields on both frame rails. Measure 5" forward on the heat shield and make a 1.25" hole in line with the screw hole on both sides. Flattening the heat shield around the removed screw will aid in installing the forward flange nuts.
Yes, the passenger side muffler must be temporarily removed. Remove the two flange nuts attaching it to the exhaust pipe using a 14mm socket. The exhaust must also be lowered by removing five rubber isolators (two on each muffler and one in the center) before installation begins.
Lower the exhaust by removing five rubber isolators: two on each muffler and one in the center of the exhaust. Remove the passenger side muffler by removing the two flange nuts attaching it to the exhaust pipe with a 14mm socket. The exhaust is reinstalled in reverse order after the hitch is secured.
All 7/16" hardware must be torqued to 59 ft-lbs. This includes the carriage bolts and hex flange nuts. Use a torque wrench to ensure proper tightening.
The kit includes: two 7/16-14 UNC 1-1/2" carriage bolts (part 10-10282), two 7/16-14 UNC 1" carriage bolts (part 10-10311), four 7/16-14 UNC hex flange nuts (part 20-00103), two .250 x 1.00 x 3.00" square hole spacers (part CM-SP6), two .250 x .88 x 2.25" square hole spacers (part CM-SP2), and four 7/16" fishwires (part 7_16 FISHWIRE).
1. Lower exhaust by removing five rubber isolators and the passenger side muffler. 2. Remove the rearward heat shield screw and trim heat shields (1.25" hole 5" forward). 3. Position hitch, mark rearward mounting holes, drill with 1/2" bit. 4. Reverse fishwire the 1-1/2" carriage bolts and spacers through drilled holes, then reverse fishwire the 1" carriage bolts and spacers into forward mounting slots. 5. Raise hitch and loosely secure with hex flange nuts. 6. Torque all 7/16" hardware to 59 ft-lbs and reinstall exhaust.
Safety glasses must be worn at all times during installation. Read all instructions thoroughly before beginning. If you are hesitant to undertake this task, contact an authorized CURT installer. Never exceed your vehicle manufacturer's recommended towing capacity.
All non-trailer (wheel-less) loads applied to this hitch must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
The CURT 11525 is designed for use with ball mount part number 45520. Euro mount options are available: part 45561 (1 7/8" ball) and part 45562 (2" ball).
Yes, the CURT 11525 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 11525 fits 2018-present Honda Accord Sedan models with a maximum towing capacity of 2,000 lbs trailer weight and 200 lbs tongue weight.
Yes, you must drill two 1/2" holes in the frame rails. Heat shield trimming (1.25" hole) and exhaust lowering are also required.
You need a torque wrench, ratchet, 11/16", 10mm and 14mm sockets, power drill with 1/2" bit, die grinder or shears, tape measure, marker, and safety glasses.
All 7/16" hardware must be torqued to 59 ft-lbs using a torque wrench.
Maximum trailer weight is 2,000 lbs and tongue weight is 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, the passenger side muffler must be temporarily removed using a 14mm socket. The exhaust must also be lowered by removing five rubber isolators.
Two people may be required to ease installation. If hesitant, contact an authorized CURT installer or call technical support at 877-287-8634.
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$375.57$482.53
No reviews have been added for this product.
