Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2010 Pontiac Vibe
Confirmed to Fit
2009 - 2013 Toyota Matrix
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 250 LB / 2,500 LB
Weight Carrying Capacity (Pounds): 2,500 LB
WC Tongue Weight (Pounds): 250 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Pontiac Vibe and Toyota Matrix (see application info to verify fitment). It is rated for 2,500 pounds gross trailer weight and 250 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94942 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2010 | Pontiac Vibe | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 2009 - 2013 | Toyota Matrix | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 122283 Class 2 Hitch with Ball Mount, 1-1/4-Inch, Concealed Body, Fits Select Pontiac Vibe, Toyota Matrix (Part #BKDK122283) fits 2009-2010 Pontiac Vibe models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 122283 Class 2 Hitch with Ball Mount, 1-1/4-Inch, Concealed Body, Fits Select Pontiac Vibe, Toyota Matrix (Part #BKDK122283) fits the following vehicles: 2009-2010 Pontiac Vibe; 2009-2013 Toyota Matrix. Always verify your specific year, make, and model before ordering.
Yes, the CURT 122283 Class 2 Hitch with Ball Mount, 1-1/4-Inch, Concealed Body, Fits Select Pontiac Vibe, Toyota Matrix (Part #BKDK122283) is designed to fit the 2009-2010 Pontiac Vibe.
The CURT 122283 Class 2 Hitch with Ball Mount, 1-1/4-Inch, Concealed Body, Fits Select Pontiac Vibe, Toyota Matrix (Part #BKDK122283) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Part number 12228 is designed for Toyota Matrix and Pontiac Vibe models. However, it will not fit Pontiac Vibe GT or Toyota Matrix GT models. If you own an XRS or XR Sport variant, the lower valance will require trimming for installation.
The hitch has a gross load capacity of 2,500 lbs trailer weight and 250 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The hitch weight is 23 lbs.
The hitch is designed for use with ball mount part number D-55001.
No, drilling is not required. The hitch uses existing weldnuts in the frame rails of your vehicle.
Yes, if you own a Toyota Matrix XRS or XR Sport model, the lower valance must be trimmed for hitch installation. Other Matrix models do not require this modification.
Heat shield modification may be required, depending on your specific vehicle configuration. The manual does not provide detailed instructions for this modification.
You will need: a ratchet, a 10-inch extension, a 19mm socket, and a torque wrench.
The hitch includes 4 conical toothed washers (1/2 inch) and 4 hex bolts (M12-1.25 x 30mm). These bolts install into the existing weldnuts in the vehicle's frame rails.
Torque the M12-1.25 x 30mm hex bolts to 86 lb-ft.
1. Raise the hitch into position over the exhaust. Align the slots in the hitch with the weldnuts in the frame rails closest to the rear end of the vehicle. 2. Install the hex bolts and conical tooth washers into the weldnuts. 3. Torque the bolts to 86 lb-ft.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain safe operation and prevent loosening due to vibration during towing.
Do not exceed your vehicle manufacturer's recommended towing capacity. Although the hitch is rated for 2,500 lbs trailer weight and 250 lbs tongue weight, your vehicle's manufacturer may specify a lower limit that you must follow.
The Curt 12228 fits Toyota Matrix and Pontiac Vibe models, but not GT variants. XRS and XR Sport models require lower valance trimming.
No drilling is required. The hitch uses existing weldnuts in the frame rails.
You need a ratchet, 10-inch extension, 19mm socket, and torque wrench.
Torque the M12-1.25 x 30mm bolts to 86 lb-ft.
The hitch is rated for 2,500 lbs trailer weight and 250 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
The hitch is designed for use with ball mount part number D-55001.
On Sale Today
Original price was $373.95. Current price is $252.99.You save $120.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sat, Sep 12 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$403.57$524.53
No reviews have been added for this product.