Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2010 - 2016 Cadillac SRX
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
WD / WDTW (Pounds): 6,000 LB / 600 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Weight Distribution (Pounds): 6,000 LB
WD Tongue Weight (Pounds): 600 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Cadillac SRX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2016 | Cadillac SRX | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
Yes, the CURT 13002 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Cadillac SRX (Part #BKDK13002) is designed to fit the 2010-2016 Cadillac SRX.
The CURT 13002 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Cadillac SRX (Part #BKDK13002) fits the following vehicles: 2010-2016 Cadillac SRX. Always verify your specific year, make, and model before ordering.
The CURT 13002 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Cadillac SRX (Part #BKDK13002) fits 2010-2016 Cadillac SRX models. The 2016 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 13002 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Cadillac SRX (Part #BKDK13002) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 13002 is designed for 2010-Present Cadillac SRX Crossover models. Verify your vehicle matches this model and year range before purchasing.
As a weight carrying hitch, the CURT 13002 supports 5,000 lbs trailer weight and 500 lbs tongue weight. As a weight distribution hitch, it supports 6,000 lbs trailer weight and 600 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
You will need: torque wrench, ratchet, 10mm socket, 19mm socket, Phillips and flat blade screwdrivers, wire pipe brush, and masking tape. Safety glasses must be worn at all times during installation.
No, drilling is not required. The hitch uses existing factory mounting points on the frame rails.
All M12 fasteners must be torqued to 79 ft-lbs.
If you plan to install a trailer wiring harness, do so before installing the hitch. The driver side plate slides between the wiring harness and the driver side frame rail during hitch installation.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for assistance.
The hitch weighs 30 lbs.
The installation is rated as moderate difficulty. Professional installation takes approximately 60 minutes, while a novice DIY installation typically takes 30 minutes.
The kit includes 6 M12x1.75x30mm hex head cap screws (part number 10-10432) and 6 1/2" conical toothed washers (part number 30-00149). These fasteners secure the hitch to the frame rails.
1. Remove the 2 screws securing the center fascia panel and remove the panel. 2. Remove the 4 plastic push fasteners securing the rear fascia to the fascia support brackets, and remove the 2 nuts securing the brackets to the trunk pan. 3. Raise the hitch into position and secure using M12-1.75x30mm bolts and 1/2" conical toothed washers, sliding the driver side plate between the wiring harness and driver side frame rail. 4. Reinstall the fascia support brackets and fasteners. 5. Torque all M12 fasteners to 79 ft-lbs. 6. Return the center fascia panel and fasteners to the owner.
You do not need to remove the rear fascia completely. You only need to remove the 4 plastic push fasteners securing the rear fascia to the fascia support brackets and the 2 nuts securing the brackets to the trunk pan. Then pull down on the rear fascia to access the mounting area. The fascia support brackets are removed and reinstalled during the process.
Slide the driver side plate between the wiring harness and the driver side frame rail. You may need to pull down on the rear fascia to slide the hitch between the trunk pan and fascia.
Use masking tape to protect the vehicle finish, particularly when working with the fascia and brackets.
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for assistance.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This is important for safe towing operation.
You should periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, this product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
For more information, log onto www.curtmfg.com. For helpful towing tips, log onto www.hitchinfo.com. For technical support questions, call 877-287-8634.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $344.95. Current price is $233.99.You save $110.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Sep 18 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$368.53$482.00
No reviews have been added for this product.