Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2020 Hyundai Santa Fe
Confirmed to Fit
2016 - 2020 Kia Sorento
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 750 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 750 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 45
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Kia Sorento (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2020 | Hyundai Santa Fe | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
| 2016 - 2020 | Kia Sorento | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
Yes, the CURT 13195 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Kia Sorento (Part #BKDK13195) is designed to fit the 2019-2020 Hyundai Santa Fe.
The CURT 13195 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Kia Sorento (Part #BKDK13195) fits the following vehicles: 2019-2020 Hyundai Santa Fe; 2016-2020 Kia Sorento. Always verify your specific year, make, and model before ordering.
The CURT 13195 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Kia Sorento (Part #BKDK13195) fits 2019-2020 Hyundai Santa Fe models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 13195 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Kia Sorento (Part #BKDK13195) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 13195 fits Kia Sorento models from 2016 to present. The hitch is designed as a weight-carrying receiver hitch with a maximum trailer weight capacity of 5,000 lbs. and tongue weight capacity of 750 lbs.
Yes, CURT part number 13195 fits Hyundai Santa Fe models from 2019 to present. The hitch is designed as a weight-carrying receiver hitch with a maximum trailer weight capacity of 5,000 lbs. and tongue weight capacity of 750 lbs.
The CURT 13195 hitch has a maximum trailer weight capacity of 5,000 lbs. and a tongue weight capacity of 750 lbs. when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
Required tools are: socket wrench, torque wrench, 10-inch socket extension, 3/4-inch socket, 14mm socket, 17mm socket, 11/16-inch socket, Phillips screwdriver, and safety glasses. Using proper tools will greatly improve the quality of the install and reduce the time required.
The hitch includes: (2) 1/2-13 UNC carriage bolts 4-1/2 inches long, Grade 8, zinc-plated (part 10-10297); (2) 1/2-13 UNC serrated flange nuts, Grade 8, zinc-plated (part 20-00062); (3) M10x1.25 hex cap screws 30mm long, Class 10.9, zinc-plated (part 10-10271); (3) 3/8-inch conical toothed washers, zinc-plated (part 30-00148); (2) 7/16-14 UNC carriage bolts 4-1/2 inches long, Grade 8, zinc-plated (part 10-10270); and (2) 7/16-14 UNC serrated flange nuts, Grade 8, zinc-plated (part 20-00103).
Yes. You must temporarily lower the spare tire before beginning installation. The spare tire is raised back into position in the final step after the hitch is fully installed and all fasteners are torqued.
Yes. You must temporarily remove the underbody panel on the driver side of the vehicle by removing (5) screws and (2) nuts. Retain the screws for reinstallation. The panel is reinstalled in reverse order after the hitch is fully installed.
Yes. You must temporarily lower the exhaust by removing (3) rubber isolators: (1) isolator toward the rear of the muffler, (1) isolator toward the front of the muffler, and (1) isolator on the exhaust tube forward of the muffler. The exhaust is raised back and the isolators are reattached after the hitch is fully installed.
Yes. You must remove (1) rubber plug from the bottom of the passenger side frame rail and (1) rubber plug from the bottom of the driver side frame rail. These plugs should be returned to the vehicle owner after removal.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, you can contact an authorized CURT installer for additional assistance.
The installation difficulty level is rated as Moderate. Professional installation time is approximately 90 minutes, while novice (DIY) installation time is approximately 45 minutes.
No. When raising the hitch into position, the (2) M10 hex bolts and washers on the passenger side and (1) M10 hex bolt and washer on the driver side should be loosely installed into the existing weldnuts. They are fully torqued to 48 lb-ft in a later step after all carriage bolts are installed.
The 1/2-inch carriage bolts and hex flange nuts must be torqued to 110 lb-ft.
The 7/16-inch carriage bolts and hex flange nuts must be torqued to 60 lb-ft.
The M10 hex cap screws and conical toothed washers must be torqued to 48 lb-ft.
Two M10 hex bolts with 3/8-inch conical toothed washers are installed into existing weldnuts on the passenger side of the vehicle.
One M10 hex bolt with a 3/8-inch conical toothed washer is installed into an existing weldnut on the driver side of the vehicle.
Two 1/2-inch carriage bolts are installed through the hitch and existing holes in the driver side frame rail. They are secured with 1/2-inch hex flange nuts and torqued to 110 lb-ft.
Two 7/16-inch carriage bolts are installed through the hitch and existing holes in the passenger side frame rail. They are secured with 7/16-inch hex flange nuts and torqued to 60 lb-ft.
Safety glasses should be worn at all times while installing this product.
All non-trailer loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is important for safe operation.
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
You can call CURT Technical Support at 877-287-8634 for help or questions about installation. If you are hesitant to undertake the installation on your own, you can also contact an authorized CURT installer for additional assistance.
CURT 13195 fits 2016-present Kia Sorento and 2019-present Hyundai Santa Fe. Maximum towing capacity is 5,000 lbs. trailer weight and 750 lbs. tongue weight.
You need: socket wrench, torque wrench, 10-inch socket extension, 3/4-inch, 14mm, 17mm, and 11/16-inch sockets, Phillips screwdriver, and safety glasses.
You must temporarily lower the spare tire, remove the driver-side underbody panel (5 screws and 2 nuts), lower the exhaust (3 rubber isolators), and remove 2 rubber frame plugs.
Torque 1/2-inch hardware to 110 lb-ft, 7/16-inch hardware to 60 lb-ft, and M10 hardware to 48 lb-ft.
Professional installation takes approximately 90 minutes; novice (DIY) installation takes approximately 45 minutes. Installation difficulty is rated as Moderate.
Never exceed your vehicle manufacturer's recommended towing capacity. All non-trailer loads must be supported by CURT 18050 stabilizing straps, or warranty is voided.
Periodically check that all fasteners are tight and all structural components are sound.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $386.95. Current price is $260.99.You save $125.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$395.53$524.00
No reviews have been added for this product.