Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1997 - 2001 Honda CR-V
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 40
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda CR-V (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1997 - 2001 | Honda CR-V | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
The CURT 13314 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V (Part #BKDK13314) fits 1997-2001 Honda CR-V models. The 2001 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 13314 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V (Part #BKDK13314) is designed to fit the 1997-2001 Honda CR-V.
The CURT 13314 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V (Part #BKDK13314) fits the following vehicles: 1997-2001 Honda CR-V. Always verify your specific year, make, and model before ordering.
The CURT 13314 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V (Part #BKDK13314) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 13314 is designed for 1997–2001 Honda CRV models.
The manual lists a gross load capacity of 3500 lbs trailer weight and 350 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads may be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself is rated for 3500 lbs trailer weight, but your Honda CRV's factory towing limit is the governing limit. Consult your vehicle's owner manual for the specific capacity.
Yes. Before installation, you must lower the exhaust system by removing two rear exhaust hangers and one hanger in front of the axle. After the hitch is installed and raised into position, you will reattach these three hangers. If the muffler interferes with the hitch, the exhaust hangers must be modified.
Drilling may be required. Specifically, the large frame hole may need to be enlarged to 1 1/4" to accommodate the 7/16" carriage bolt and spacer. The manual notes that drilling may be required, but the extent depends on your vehicle's existing frame holes.
The kit includes: four 7/16-14 UNC Grade 8 serrated flange nuts (part 20-00103), four 0.250 x 0.88 x 2.25" square hole spacers (CM-SP2), two 7/16-14 UNC 1-1/4" Grade 8 carriage bolts (10-10281), two 7/16-14 UNC 1-3/4" Grade 8 carriage bolts (10-10314), one 3/8-16 x 1.938 x 0.875" U-bolt (CM-3805-UBR), two 3/8-16 UNC Grade 5 serrated flange nuts (20-00099), and one 7/16" fishwire installation tool.
Torque all 7/16" hardware to 70 ft-lbs.
Torque all 3/8" hardware to 26 lb-ft.
1. Lower the exhaust system by removing two rear exhaust hangers and one hanger in front of the axle. 2. Use the 7/16" fishwire to thread a carriage bolt and spacer through the large frame hole (enlarge to 1 1/4" if necessary) and out the small front hole. 3. Remove the fishwire, then use it to thread a carriage bolt and spacer into the rear frame hole. Repeat for the driver side frame rail. 4. Raise the hitch into position and attach the 7/16" flange nuts. Torque 7/16" hardware to 70 ft-lbs and 3/8" hardware to 26 lb-ft. 5. Reattach the three exhaust hangers, modifying them if the muffler interferes.
The 7/16" fishwire is an installation aid used to thread the carriage bolts and spacers through the frame holes. You thread the bolt and spacer onto the fishwire, pull it through the large frame hole and out the small front hole, then remove the fishwire and repeat the process for the rear frame hole and driver side frame rail.
Thread the 7/16" carriage bolt and spacer onto the fishwire. Pull the fishwire through the large frame hole (enlarge to 1 1/4" if necessary) and out the small front hole in the frame. Remove the fishwire from the front bolt. Repeat this process by threading another carriage bolt and spacer onto the fishwire and pulling it into the rear frame hole. Remove the fishwire and repeat the entire process for the driver side frame rail.
You must remove the three exhaust hangers before installation. After the hitch is raised into position, reattach them. If the muffler interferes with the hitch, the exhaust hangers must be modified as needed to clear the hitch.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
Curt Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. Curt's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 13314 is designed for 1997–2001 Honda CRV models.
Yes. Remove two rear exhaust hangers and one hanger in front of the axle before installation. Reattach them after the hitch is raised into position, modifying them if the muffler interferes.
Drilling may be required. The large frame hole may need to be enlarged to 1 1/4" to accommodate the 7/16" carriage bolt and spacer.
Torque 7/16" hardware to 70 ft-lbs and 3/8" hardware to 26 lb-ft.
The hitch is rated for 3500 lbs trailer weight and 350 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads voids the warranty.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $368.95. Current price is $248.99.You save $119.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$383.53$506.00
No reviews have been added for this product.