Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2018 - 2026 Honda Odyssey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Installation requires temporary panel removal
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 525 LB / 3,500 LB
WD / WDTW (Pounds): 5,000 LB / 525 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 525 LB
Weight Distribution (Pounds): 5,000 LB
WD Tongue Weight (Pounds): 525 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Odyssey (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 525 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2026 | Honda Odyssey | No Drilling Required Exhaust: Temporarily Remove Exhaust Deflector Installation Time: 30-60 minutes Remove Underbody Panel: Required Visibility: Exposed |
Yes, the CURT 13370 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey (Part #BKDK13370) is designed to fit the 2018-2026 Honda Odyssey.
The CURT 13370 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey (Part #BKDK13370) fits the following vehicles: 2018-2026 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The CURT 13370 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey (Part #BKDK13370) fits 2018-2026 Honda Odyssey models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 13370 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey (Part #BKDK13370) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 13370 is designed for 2018-present Honda Odyssey vans. The hitch is a weight-carrying receiver hitch with a maximum trailer weight capacity of 3,500 lbs and tongue weight capacity of 525 lbs when used as a weight-carrying hitch, or 5,000 lbs trailer weight and 525 lbs tongue weight when used as a weight distribution hitch. Always verify your vehicle's manufacturer towing capacity before towing.
The tongue weight capacity is 525 lbs for both weight-carrying and weight distribution configurations.
The maximum trailer weight is 3,500 lbs when used as a weight-carrying hitch, or 5,000 lbs when used as a weight distribution hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
The hitch weight is 40 lbs.
No, drilling is not required. The hitch uses existing access holes and weldnuts in the frame rails of the 2018-present Honda Odyssey.
Yes. You must remove the plastic underbody panel covering the driver side frame rail by removing 6 fasteners: 4 plastic push pins, 1 Phillips head screw, and 1 hex bolt (10mm socket). Return these fasteners and the plastic shield to the vehicle owner. You may trim the panel and re-attach it after hitch installation.
Yes, you must temporarily remove the exhaust deflector by removing 2 fasteners. The deflector is removed to allow the hitch to be raised into position by sliding the passenger side plate over the exhaust first. After securing the hitch, reinstall the exhaust deflector.
Required tools are: ratchet, torque wrench, 9-inch extension, safety glasses, sockets (11/16", 10mm, 19mm), straight screwdriver, and Phillips screwdriver.
The hitch includes: 4 M12x1.25x35mm hex head cap screws (part 10-10275), 2 7/16-14 UNC 1-1/2" carriage bolts (part 10-10282), 2 7/16-14 UNC serrated flange nuts (part 20-00103), 4 1/2" conical toothed washers (part 30-00149), 2 0.250 x 0.88 x 2.25" square hole spacers (part CM-SP2), and 2 7/16" fishwires (part 7_16 FISHWIRE).
1. Remove the underbody panel (6 fasteners) and temporarily remove the exhaust deflector (2 fasteners). 2. Reverse fishwire the 2 carriage bolts and CM-SP2 spacers into the existing holes in the frame rails, leaving fishwires attached. 3. Clean the weldnuts near the end of each frame rail of debris and rust. 4. Raise the hitch into position by sliding the passenger side plate over the exhaust first, then secure using M12-1.25 x 35mm bolts, 1/2" conical toothed washers, and 7/16" flange nuts. 5. Torque all 12mm hardware to 86 lb-ft and all 7/16" hardware to 59 lb-ft. Reinstall the exhaust deflector.
Reverse fishwire refers to using the fishwire (a flexible wire tool) to guide the carriage bolts and spacers into the existing access holes in the bottom of the frame rails from underneath the vehicle. The fishwires remain attached to the bolts during this process to help position them correctly before final tightening.
All 12mm hardware (M12-1.25 x 35mm bolts) must be torqued to 86 lb-ft.
All 7/16" hardware (7/16-14 UNC carriage bolts and flange nuts) must be torqued to 59 lb-ft.
Safety glasses must be worn at all times while installing this product. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Two people may be required to ease installation.
Never exceed your vehicle manufacturer's recommended towing capacity. The hitch capacity is 3,500 lbs trailer weight and 525 lbs tongue weight for weight-carrying use, or 5,000 lbs trailer weight and 525 lbs tongue weight for weight distribution use, but your vehicle's manufacturer may have a lower limit that must be observed.
Periodically check that all fasteners are tight and that all structural components are sound. This ongoing maintenance is important for safe operation.
The manual instructs you to periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound, but does not specify an exact interval. Regular inspection before towing is recommended.
Yes, this product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, CURT 13370 is designed for 2018-present Honda Odyssey vans. Maximum capacity: 3,500 lbs trailer / 525 lbs tongue weight (weight-carrying) or 5,000 lbs trailer / 525 lbs tongue weight (weight distribution). Always verify your vehicle's manufacturer towing capacity.
No drilling required. Installation uses existing frame rail access holes and weldnuts. You must remove the underbody panel and temporarily remove the exhaust deflector.
Ratchet, torque wrench, 9-inch extension, safety glasses, sockets (11/16", 10mm, 19mm), straight screwdriver, and Phillips screwdriver.
Torque all 12mm hardware to 86 lb-ft and all 7/16" hardware to 59 lb-ft.
3,500 lbs trailer weight and 525 lbs tongue weight for weight-carrying use; 5,000 lbs trailer weight and 525 lbs tongue weight for weight distribution use. Never exceed your vehicle manufacturer's recommended towing capacity.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer.
Safety glasses must be worn at all times during installation.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $323.95. Current price is $219.99.You save $103.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
Total for 5 items:
$354.53$461.00