Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1994 - 2001 Dodge Ram 1500
Confirmed to Fit
1994 - 2002 Dodge Ram 2500
Confirmed to Fit
1994 - 2002 Dodge Ram 3500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes all necessary installation hardware
Includes all necessary installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 45
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2" x 2" shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Dodge Ram 1500, 2500 and 3500 (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
3 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1994 - 2001 | Dodge Ram 1500 | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 1994 - 2002 | Dodge Ram 2500 | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
| 1994 - 2002 | Dodge Ram 3500 | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 2" Front Receiver Hitch, Select Dodge Ram 1500, 2500, 3500 Trailer Hitch (Part #BKDK31604) fits the following vehicles: 1994-2001 Dodge Ram 1500; 1994-2002 Dodge Ram 2500; 1994-2002 Dodge Ram 3500. Always verify your specific year, make, and model before ordering.
Yes, the CURT 2" Front Receiver Hitch, Select Dodge Ram 1500, 2500, 3500 Trailer Hitch (Part #BKDK31604) is designed to fit the 1994-2001 Dodge Ram 1500.
The CURT 2" Front Receiver Hitch, Select Dodge Ram 1500, 2500, 3500 Trailer Hitch (Part #BKDK31604) fits 1994-2001 Dodge Ram 1500 models. The 2002 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 2" Front Receiver Hitch, Select Dodge Ram 1500, 2500, 3500 Trailer Hitch (Part #BKDK31604) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The Curt 31604 has a gross load capacity of 5,000 lbs. trailer weight and 500 lbs. tongue weight when used as a weight-carrying hitch, and a maximum line pull of 9,000 lbs. when used as a straight-line pull hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these specifications.
The Curt 31604 is designed for Dodge Ram Pickup front hitch installation. However, the manual does not specify which model years, cab styles, or bed lengths are compatible. Contact Curt Manufacturing or consult a fitment database to confirm compatibility with your specific vehicle.
Yes. Step 1 of the installation requires you to remove bumper bolts or bolt plates at the end of the frame, as well as the bolt and U-nut holding the bumper support to the angled section of the frame.
Drilling may be required. If the middle hole of the hitch is not already present on your frame, you will need to drill a 17/32" hole in both frame rails using the hitch as a template. The manual notes that drilling may be required but does not specify whether this is common or vehicle-dependent.
If your vehicle has a front air dam, you may need to trim a 2" x 2" piece or remove the air dam completely. The manual notes that this requirement depends on the specific model. Some models may require switching the spacer locations to accommodate clearances.
The kit includes: 8× 1/2-13 UNC Grade 8 bolts (1-1/2" long), 8× 1/2-13 UNC Grade 8 serrated flange nuts, 2× 0.250" × 1.00" × 3.00" square hole spacers, 6× 0.250" × 1.00" × 2.00" square hole spacers, and 2× 1/2" fishwire.
You will need a torque wrench (to torque fasteners to the specified values), a drill with a 17/32" bit (if frame holes are not present), and basic hand tools for removing the bumper and fastening hardware. The manual does not specify whether additional tools such as a socket set or impact wrench are required.
Torque values are: 3/8" fasteners to 45 lb-ft, 7/16" fasteners to 70 lb-ft, 1/2" fasteners to 110 lb-ft, and 5/8" fasteners to 210 lb-ft. The kit includes 1/2" bolts and nuts, which should be torqued to 110 lb-ft.
1. Remove bumper bolts, bolt plates, and the bolt and U-nut holding the bumper support to the angled frame section. 2. Place the receiver into position and loosely fasten at the front holes with the provided hardware. 3. If the middle hole is not present on the frame, drill a 17/32" hole in both frame rails using the hitch as a template. 4. Fishwire the remaining hardware into the specified locations. 5. Torque all fasteners to their specified values (3/8" to 45 lb-ft, 7/16" to 70 lb-ft, 1/2" to 110 lb-ft, 5/8" to 210 lb-ft).
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a retorque interval or maintenance schedule beyond this general inspection requirement.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch specifications (5,000 lbs. trailer weight, 500 lbs. tongue weight, or 9,000 lbs. max line pull) must not be used if they exceed what your vehicle is rated to tow.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
The Curt 31604 is a front hitch for Dodge Ram Pickup. Confirm your specific model year and configuration with Curt or a fitment database before purchasing.
5,000 lbs. trailer weight and 500 lbs. tongue weight (weight-carrying mode), or 9,000 lbs. max line pull. Do not exceed your vehicle's manufacturer towing capacity.
Drilling may be required. If the middle hole is not present on your frame, you will need to drill a 17/32" hole in both frame rails. Air dam trimming or removal may also be necessary depending on your model.
Torque 1/2" fasteners to 110 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity, even if the hitch specifications are higher.
On Sale Today
Original price was $448.95. Current price is $301.99.You save $146.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.