Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2000, 2002 - 2006 Cadillac Escalade
Confirmed to Fit
2002 - 2006 Chevrolet Avalanche 1500
Confirmed to Fit
2002 - 2006 Chevrolet Avalanche 2500
Confirmed to Fit
1999 - 2006 Chevrolet Silverado 1500
Confirmed to Fit
2007 Chevrolet Silverado 1500 Classic
Confirmed to Fit
2000 - 2006 Chevrolet Suburban 1500
Confirmed to Fit
2000 - 2006 Chevrolet Tahoe
Confirmed to Fit
1999 - 2006 GMC Sierra 1500
Confirmed to Fit
Confirmed to Fit
2000 - 2006 GMC Yukon
Confirmed to Fit
2000 - 2006 GMC Yukon XL 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes all necessary installation hardware
Includes all necessary installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 60
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2" x 2" shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Cadillac Escalade, Chevy Avalanche, Chevy Silverado, Chevy Suburban, Chevy Tahoe, GMC Sierra and GMC Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-949411 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000, 2002 - 2006 | Cadillac Escalade | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2002 - 2006 | Chevrolet Avalanche 1500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2002 - 2006 | Chevrolet Avalanche 2500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 1999 - 2006 | Chevrolet Silverado 1500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2007 | Chevrolet Silverado 1500 Classic | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2000 - 2006 | Chevrolet Suburban 1500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2000 - 2006 | Chevrolet Tahoe | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 1999 - 2006 | GMC Sierra 1500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2007 | GMC Sierra 1500 Classic | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2000 - 2006 | GMC Yukon | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2000 - 2006 | GMC Yukon XL 1500 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
Yes, the CURT 31302 2-Inch Front Receiver Hitch, Select Cadillac, Chevrolet, GMC Trucks, SUVs (Part #BKDK31302) is designed to fit the Cadillac Escalade.
The CURT 31302 2-Inch Front Receiver Hitch, Select Cadillac, Chevrolet, GMC Trucks, SUVs (Part #BKDK31302) fits the following vehicles: Cadillac Escalade; 2002-2006 Chevrolet Avalanche 1500; 2002-2006 Chevrolet Avalanche 2500; 1999-2006 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 2000-2006 Chevrolet Suburban 1500; 2000-2006 Chevrolet Tahoe; 1999-2006 GMC Sierra 1500; 2007 GMC Sierra 1500 Classic; 2000-2006 GMC Yukon; 2000-2006 GMC Yukon XL 1500. Always verify your specific year, make, and model before ordering.
The CURT 31302 2-Inch Front Receiver Hitch, Select Cadillac, Chevrolet, GMC Trucks, SUVs (Part #BKDK31302) fits Cadillac Escalade models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 31302 2-Inch Front Receiver Hitch, Select Cadillac, Chevrolet, GMC Trucks, SUVs (Part #BKDK31302) Drilling is not required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
Yes, Curt part number 31302 is designed for GMC Sierra and Chevy Silverado models. However, the manual does not specify which model years are compatible. Contact Curt Technical Support at 1-877-287-8634 to confirm fitment for your specific vehicle year, cab style, and bed length.
The Curt 31302 has a gross load capacity of 5,000 lbs. trailer weight and 500 lbs. tongue weight when used as a weight-carrying hitch, or 9,000 lbs. maximum line pull when used as a straight-line pull hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The hitch weight is 120 lbs.
Only if your vehicle has tow hooks. Models with tow hooks require removal of the factory bolt from the underside of the frame at the forward attachment point before installation begins.
The kit includes: 4× 1/2"-13 UNC 2-1/2" grade 8 carriage bolts (part 10-10306); 6× 1/2"-13 UNC 1-1/4" grade 8 hex cap screws (part 10-10470); 10× 1/2"-13 UNC grade 8 serrated flange nuts (part 20-00062); 4× 0.250" × 1.00" × 2.00" square hole spacers (part CM-SP12); and 4× 1/2" × 30" fishwire (part 1_2 x 30 FISHWIRE). The fishwire may require cutting.
Only if you choose the through-bumper configuration. The through-bumper configuration requires cutting a 3" square hole into the plastic fascia, positioned on the vehicle centerline 3.5" below the top edge of the plastic fascia. Alternatively, the hitch can be installed in a below-bumper configuration by reversing the cross member, which does not require cutting the bumper.
1. If your vehicle has tow hooks, remove the factory bolt from the underside of the frame at the forward attachment point. 2. Use fishwire to thread the 1/2" carriage bolts and spacers through the frame as shown in the diagram. 3. Fasten the frame brackets to the frame using 1/2" flange nuts, leaving them loosely installed to allow adjustment. Reinstall factory fasteners if they were removed. 4. Install the cross member between the brackets and secure with the hex bolts and flange nuts provided. 5. Tighten all bolts to the proper torque specification of 110 lb-ft for 1/2" fasteners.
All 1/2" fasteners must be tightened to 110 lb-ft.
The manual does not specify which tools are required. Contact Curt Technical Support at 1-877-287-8634 for a complete tool list. At minimum, you will need a torque wrench capable of measuring 110 lb-ft, and if choosing the through-bumper configuration, a tool to cut a 3" square hole in the plastic fascia.
Periodically check the hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a maintenance interval. Contact Curt Technical Support at 1-877-287-8634 for recommended inspection intervals.
The Curt 31302 is designed for GMC Sierra and Chevy Silverado models. Confirm your specific year, cab style, and bed length with Curt Technical Support at 1-877-287-8634.
5,000 lbs. trailer weight and 500 lbs. tongue weight for weight-carrying use, or 9,000 lbs. maximum line pull. Do not exceed your vehicle manufacturer's recommended towing capacity.
Only for through-bumper configuration, which requires a 3" square hole cut 3.5" below the top edge of the plastic fascia. The below-bumper configuration does not require cutting.
Tighten all 1/2" fasteners to 110 lb-ft.
Only if your vehicle has them. Remove the factory bolt from the underside of the frame at the forward attachment point before installation.
Periodically check that all fasteners are tight and structural components are sound. The manual does not specify an interval; contact Curt Technical Support at 1-877-287-8634.
On Sale Today
Original price was $469.95. Current price is $315.99.You save $153.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.