CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2019 Ford Fiesta
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 150 LB / 1,500 LB
Weight Carrying Capacity (Pounds): 1,500 LB
WC Tongue Weight (Pounds): 150 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Ford Fiesta (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 1,500 lbs. GTW and 150 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2011 - 2019 | Ford Fiesta | Hatchback · 4-Door | No Drilling Required Installation Time: 30-60 minutes Undercar Trimming: required Undercar Trimming (Not Fascia): Yes Visibility: Exposed |
On Sale Today
Original price was $303.95. Current price is $206.99.You save $96.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Ford Fiesta Trailer Hitch (Part #BKDK11067) fits 2011-2019 Ford Fiesta models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Ford Fiesta Trailer Hitch (Part #BKDK11067) is designed to fit the 2011-2019 Ford Fiesta.
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Ford Fiesta Trailer Hitch (Part #BKDK11067) fits the following vehicles: 2011-2019 Ford Fiesta. Always verify your specific year, make, and model before ordering.
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Ford Fiesta Trailer Hitch (Part #BKDK11067) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 11067 is designed for Ford Fiesta Hatchback models from 2011 to current, including the ST variant. Confirm your vehicle year and body style match before purchasing.
The hitch has a gross load capacity of 1,500 lbs trailer weight and 150 lbs tongue weight when used as a weight carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The installation requires lowering the exhaust by removing two rubber isolators from the hangers attached to the frame. The hitch is then raised over the exhaust and slid past the exhaust hanger. After installation, the exhaust is raised back into position. No permanent modification to the exhaust is required.
No, drilling is not required. The hitch uses existing frame holes for mounting.
Yes, the heat shield must be trimmed. Remove the three fasteners securing the heat shield, mark and trim it according to the heat shield trim diagram (approximately 2.00 inches, though dimensions are approximate), then reattach using the same fasteners. Confirm fit prior to trimming.
Required tools are: ratchet, torque wrench, 9-inch extension, 10mm socket, 11/16-inch socket, and aviation shears. Safety glasses should be worn at all times during installation.
The kit includes: four 7/16-14 UNC 1-1/4 inch grade 8 carriage bolts (part 10-10281), four 7/16-14 UNC grade 8 serrated flange nuts (part 20-00103), four 0.250 x 1.00 x 2.50 inch square hole spacers (part CM-SP11), and two 7/16-inch fishwires (part 7_16 FISHWIRE).
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required.
All 7/16-inch hardware must be torqued to 59 ft-lbs.
1. Lower the exhaust by removing two rubber isolators from the frame hangers. 2. Remove three fasteners securing the heat shield and remove it. 3. Mark and trim the heat shield, then reattach using the same fasteners. 4. Fishwire a 7/16-14 x 1-1/4 inch carriage bolt and SP11 spacer through the rearmost frame hole and out the next hole toward the front on both sides. 5. Reverse fishwire the same bolt and spacer into the rearmost hole on both sides. 6. Raise the hitch over the exhaust and slide it past the exhaust hanger, then secure using 7/16-14 flange nuts. 7. Torque all 7/16-inch hardware to 59 ft-lbs. 8. Raise the exhaust back into position.
Fishwire is a technique to guide fasteners through frame holes without losing them inside the frame rails. For the 11067, you thread a 7/16-14 x 1-1/4 inch carriage bolt and CM-SP11 spacer through the rearmost hole in the frame and out the next hole toward the front on both sides. Then reverse the same bolt and spacer back into the rearmost hole on both sides. This allows you to position the hitch without losing bolts and spacers inside the frame.
All non-trailer loads (wheel-less loads) applied to this hitch must be supported by Curt 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. The manual recommends the use of 18050 stabilizing straps for all non-trailer loads.
Never exceed your vehicle manufacturer's recommended towing capacity. While the hitch is rated for 1,500 lbs trailer weight and 150 lbs tongue weight, your Ford Fiesta's manufacturer specifications may be lower and must be followed.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is critical to safe operation.
The hitch is designed for use with Curt ballmount part number 55001 or 45501. Euro mount options are also available: part number 45571 (1-7/8 inch ball) and part number 45572 (2 inch ball).
Yes. The manual explicitly states: before you begin installation, read all instructions thoroughly. This will help you understand the complete process, required tools, and safety precautions.
Yes, the 11067 is designed for Ford Fiesta Hatchback models from 2011 to current, including the ST variant.
The hitch is rated for 1,500 lbs trailer weight and 150 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
No, no drilling is required. The hitch uses existing frame holes.
Yes, the heat shield must be trimmed approximately 2.00 inches according to the trim diagram. Confirm fit before trimming, then reattach with the original fasteners.
You need a ratchet, torque wrench, 9-inch extension, 10mm socket, 11/16-inch socket, and aviation shears. Wear safety glasses throughout installation.
All 7/16-inch hardware must be torqued to 59 ft-lbs.
All non-trailer loads must be supported by Curt 18050 stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound.
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Sep 7 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$357.57$454.53
No reviews have been added for this product.
