CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2023 Subaru Impreza
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires hole enlargement
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 35
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Subaru Impreza (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2017 - 2023 | Subaru Impreza | Sedan | No Drilling Required Hole Enlargement: Yes Installation Time: 30-60 minutes Temporarily Lower Exhaust: Yes Temporarily Remove Heat Shield: Yes Temporarily Remove Underbody Panel: Yes Trim Holes in Heat Shield: Yes Visibility: Exposed |
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Subaru Impreza Trailer Hitch (Part #BKDK11466) fits the following vehicles: 2017-2023 Subaru Impreza. Always verify your specific year, make, and model before ordering.
Yes, the CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Subaru Impreza Trailer Hitch (Part #BKDK11466) is designed to fit the 2017-2023 Subaru Impreza.
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Subaru Impreza Trailer Hitch (Part #BKDK11466) fits 2017-2023 Subaru Impreza models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 1 Trailer Hitch, 1-1/4" Receiver, Select Subaru Impreza Trailer Hitch (Part #BKDK11466) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT hitch 11466 is designed for 2017-Present Subaru Impreza Sedan models. Verify your vehicle matches this year range and body style before purchasing.
The hitch has a gross load capacity of 2,000 lbs. trailer weight and 200 lbs. tongue weight when used as a weight carrying hitch. Never exceed your vehicle manufacturer's recommended towing capacity.
The hitch is designed for use with ballmount #45521. Euro mount options are available: #45571 (1 7/8" ball) or #45572 (2" ball).
Required tools are: 3/4" socket, 10mm socket, ratchet, torque wrench, die grinder, aviator shears, and safety glasses. Using proper tools will greatly improve the quality of the install and reduce installation time.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that proper tools will greatly improve installation quality.
The manual does not specify whether battery disconnection is required. Contact CURT Technical Support at 877-287-8634 for clarification on this step.
The first step is to lower the exhaust by removing 3 rubber isolators. See the rubber isolator removal diagram in the manual. If needed to access outside hangers, remove the plastic underbody panel by removing 7 plastic fasteners. Support the exhaust as required during this process.
Remove the heat shield by removing 4 small screws using a 10mm socket. After removal, cut 2 holes in the heat shield as shown in the diagram (trim 1" hole on dimple on "R" and "M"). Later, reinstall the heat shield with 3 of the fasteners, without using the fastener between the hitch mounting holes.
No drilling is required. However, the installation does require trimming 2 holes in the heat shield and enlarging access holes on both frame rails to allow 1/2" fasteners to pass through. Use a die grinder to enlarge the access holes and aviator shears to trim the heat shield.
Fishwiring is a technique used to route the 1/2" hardware (bolts and spacers) through the access holes into position on both sides of the frame rails. The manual includes 6 pieces of 1/2" fishwire (part 1_2 FISHWIRE) in the hardware kit for this purpose. This allows fasteners to be positioned before the hitch is raised into place.
Remove 8 rubber plugs total from the frame: 1 large and 3 small from each frame rail (driver side and passenger side). After removal, enlarge the access holes on both sides to allow the 1/2" fasteners to pass into the frame rail.
Torque all 1/2" fasteners to 110 lb-ft. This is the final torque value after the hitch is raised into position and all fasteners are loosely installed.
The kit includes: 6 bolts (1/2-13 UNC, 1-1/2", Grade 8, part 10-10287), 6 spacers (.250 x 1.00 x 3.00" square hole, part CM-SP6), 6 nuts (serrated flange, 1/2-13 UNC, Grade 8, part 20-00062), and 6 pieces of 1/2" fishwire (part 1_2 FISHWIRE).
Reinstall the heat shield with 3 of the original 4 fasteners. Do not reinstall the fastener between the hitch mounting holes. The heat shield will be positioned between the hitch and vehicle frame rails. This is done after fishwiring the 1/2" hardware into position but before raising the hitch.
After torquing all 1/2" fasteners to 110 lb-ft, reinstall the exhaust and underbody panels onto the vehicle.
Safety glasses must be worn at all times while installing this product.
All non-trailer (wheel-less) loads applied to this product must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes incidental or consequential loss or damage.
Yes, CURT 11466 fits 2017-Present Subaru Impreza Sedan models.
2,000 lbs. trailer weight and 200 lbs. tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling required, but heat shield trimming and frame rail access hole enlargement are required using a die grinder and aviator shears.
3/4" socket, 10mm socket, ratchet, torque wrench, die grinder, aviator shears, and safety glasses.
Torque all 1/2" fasteners to 110 lb-ft.
Yes, the exhaust must be lowered by removing 3 rubber isolators as the first installation step.
All non-trailer loads must be supported by 18050 stabilizing straps. Failure to do so voids the warranty.
Designed for ballmount #45521. Euro mount options: #45571 (1 7/8" ball) or #45572 (2" ball).
On Sale Today
Original price was $355.95. Current price is $240.99.You save $114.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Sep 7 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$391.57$506.53
No reviews have been added for this product.
