Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2023 - 2026 Toyota Prius
Confirmed to Fit
2023 - 2024 Toyota Prius Prime
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Mounting hardware
| Warranty | Limited Lifetime Warranty (1-Year Finish, 1-Year Parts) |
| Mounting Location | Rear |
| Finish Color | Black |
| Hitch Class | I |
| Includes Ball Mount | No |
| Construction Material | Steel |
| Drilling Needed | Yes |
| Receiver Opening Size | 1-1/4 in |
| Max Towing Capacity | 2,000 lbs |
| Max Tongue Weight | 200 lbs |
| Warranty Coverage | Limited Lifetime (1-Year Finish, 1-Year Parts) |
| Body Shape | Square |
| Vehicle Compatibility | Toyota Prius (specific years) |
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It.
Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV.
This particular class 1 hitch is designed to be a custom hitch for certain years of the Toyota Prius (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount.
This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).
Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Limited Lifetime (One-Year Finish, one-year parts)
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2023 - 2026 | Toyota Prius | No Drilling Required Installation Time: 90+ minutes Visibility: Concealed Temporary bumper removal required Temporary bumper fascia removal required Undercar trimming (not fascia) required |
| 2023 - 2024 | Toyota Prius Prime | No Drilling Required Installation Time: 90+ minutes Visibility: Concealed Temporary bumper removal required Temporary bumper fascia removal required Undercar trimming (not fascia) required |
The CURT 11684 hitch is custom-designed to fit select years of the Toyota Prius, specifically 2023-2026 Toyota Prius and 2023-2024 Toyota Prius Prime models. This custom fit ensures easier installation and optimal towing performance for your specific vehicle. Always double-check your exact year, make, and model before ordering to ensure proper compatibility.
Yes, the CURT 11684 hitch is designed to fit 2023-2026 Toyota Prius models, so your 2025 Prius is covered. This Class 1 hitch offers 2,000 lbs gross trailer weight capacity and 200 lbs tongue weight capacity with a 1-1/4" receiver opening.
Absolutely! The CURT 11684 fits 2023-2026 Toyota Prius models, so your 2026 is within the compatibility range. This lightweight Class 1 hitch is perfect for adding cargo space with bike racks or cargo carriers, and it's backed by CURT's limited lifetime warranty.
Installation of the CURT 11684 requires some underbody panel trimming and takes approximately 90+ minutes with basic hand tools. The hitch installs using existing vehicle hardware points, so no drilling is needed. All necessary mounting hardware is included in the box for a complete installation.
The CURT 11684 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
The manual does not specify the vehicle make, model, or year. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
Required tools are: ratchet, torque wrench, 10mm socket, 12mm socket, 13mm socket, 15mm socket, 3" socket extension, flathead screwdriver, tape measure, and cut-off wheel.
The kit includes one trailer hitch and eight flange bolts (M8 x 1.25-25, CL 10.9). The original vehicle bumper beam bolts (M10) are reused during reinstallation.
The installation is rated as 'Difficult' based on time and effort involved. Difficulty may vary depending on installer expertise, vehicle condition, and proper tools and equipment. Consider your skill level before attempting installation.
The manual does not specify whether battery disconnection is required. Contact CURT product support at 877.287.8634 for guidance.
Remove eight push fasteners from the bumper trim, six from the bottom of the bumper cover, and two from inside the wheel well.
After removing all fasteners and the screw at the top of the bumper cover (Steps 1–4), gently pull the bumper cover away from the vehicle starting at the rear wheel wells and working towards the rear. Disconnect the electrical connector before setting the bumper cover aside.
Remove three bolts from each side of the bumper beam using a 15mm socket (Step 7), and four bolts from the bumper beam support brackets on each side using a 12mm socket (Step 8). Also remove the bolt from the plastic block inserted into the bumper beam using a 13mm socket (Step 6).
Yes. The underbody panel must be trimmed using the trim diagram provided in Step 9 as reference. A cut-off wheel is required for this modification.
The manual references a trim diagram with a 2-1/2" measurement, but does not provide complete dimensions or a detailed description of the trim area. Refer to the trim diagram in Step 9 of the installation manual or contact CURT product support at 877.287.8634 for clarification.
The M8 flange bolts (part of the hitch assembly) must be torqued to 23 ft-lbs.
The original M10 bumper beam bolts must be torqued to 45 ft-lbs when reinstalling the bumper beam.
The hitch is raised into position between the trunk pan and the bumper beam supports, then secured with the included M8 bolts.
Reinstall the bumper cover by following Steps 1–6 in reverse order after the hitch and bumper beam are secured.
Safety glasses must be worn at all times during installation. Before beginning, read all instructions thoroughly. Proper tools will improve installation quality and reduce time required.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure.
The manual states that periodic inspection should be performed but does not specify an interval. Contact CURT product support at 877.287.8634 for recommended inspection frequency.
Never exceed your vehicle manufacturer's recommended towing capacity. The CURT 11684 supports a gross trailer weight of 2,000 lbs and tongue weight of 200 lbs, but your vehicle's capacity may be lower.
The manual does not specify vehicle compatibility. Contact CURT at 877.287.8634 or visit curtmfg.com to confirm fitment.
No drilling is required. However, the underbody panel must be trimmed using a cut-off wheel per the trim diagram in Step 9.
M8 bolts: 23 ft-lbs. M10 bumper beam bolts: 45 ft-lbs.
Gross trailer weight: 2,000 lbs. Tongue weight: 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Installation is rated as 'Difficult' based on time and effort. Difficulty varies by installer expertise, vehicle condition, and tool availability.
Wear safety glasses at all times. Read all instructions before starting. Use proper tools and follow torque specifications to prevent damage.
On Sale Today
Original price was $303.95. Current price is $206.99.You save $96.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Sep 6 - Tue, Sep 8
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.