CURT Towing Starter Kit with 2" Ball (1-1/4" Shank, 3,500 lbss, 3/4" Rise) Trailer Hitch Ball MountCURT$60.56In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2018 - 2026 Honda Odyssey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires temporary exhaust deflector removal
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Honda Odyssey (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2026 | Honda Odyssey | Visibility: Exposed Underbody Panel: Permanent Removal or Trimming Required Reverse Fishwire Hardware: Required Installation Time: 30-60 minutes Exhaust: Temporarily Remove Exhaust Deflector No Drilling Required |
Yes, the CURT Class 2 Trailer Hitch, 1-1/4" Receiver, Select Honda Odyssey Trailer Hitch (Part #BKDK12175) is designed to fit the 2018-2026 Honda Odyssey.
The CURT Class 2 Trailer Hitch, 1-1/4" Receiver, Select Honda Odyssey Trailer Hitch (Part #BKDK12175) fits the following vehicles: 2018-2026 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The CURT Class 2 Trailer Hitch, 1-1/4" Receiver, Select Honda Odyssey Trailer Hitch (Part #BKDK12175) fits 2018-2026 Honda Odyssey models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 2 Trailer Hitch, 1-1/4" Receiver, Select Honda Odyssey Trailer Hitch (Part #BKDK12175) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, the CURT 12175 is designed for 2018-present Honda Odyssey vans. It is a weight-carrying hitch with a maximum trailer weight capacity of 3,500 lbs and tongue weight capacity of 350 lbs. Always verify your vehicle's manufacturer-recommended towing capacity before towing.
The CURT 12175 is rated for a maximum trailer weight of 3,500 lbs and tongue weight of 350 lbs when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
You will need: a ratchet, torque wrench, 9" extension, safety glasses, sockets in 11/16", 10mm, and 19mm sizes, a straight screwdriver, and a Phillips screwdriver. Using proper tools will greatly improve the quality of the install and reduce installation time.
Yes. You must remove the plastic underbody panel covering the driver side frame rail (secured by 4 plastic push pins, 1 Phillips head screw, and 1 hex bolt with 10mm socket). You must also temporarily remove the exhaust deflector (2 fasteners). The manual notes you may trim the underbody panel and re-attach it after hitch installation. Return all removed fasteners and the plastic shield to the vehicle owner.
No. The CURT 12175 requires no drilling. It uses existing access holes in the bottom of the frame rails and existing weldnuts near the end of each frame rail.
1. Remove the driver side underbody panel and temporarily remove the exhaust deflector. 2. Reverse fishwire (2) 7/16-14 x 1 1/2" carriage bolts and CM-SP2 spacers into the existing hole in the bottom of the frame rails, leaving the fishwires attached. 3. Locate and clean the weldnuts near the end of each frame rail of debris and rust. 4. Raise the hitch into position by sliding the passenger side plate over the exhaust first. Secure using M12-1.25 x 35mm bolts, 1/2" conical toothed washers, and 7/16" flange nuts. 5. Torque all 12mm hardware to 86 lb-ft and all 7/16" hardware to 59 lb-ft. Reinstall the exhaust deflector.
Torque all 12mm hardware (M12-1.25 x 35mm bolts) to 86 lb-ft. Torque all 7/16" hardware (7/16-14 flange nuts) to 59 lb-ft.
The kit includes: (2) 7/16" fishwires, (2) 7/16-14 x 1 1/2" carriage bolts (part 10-10282), (2) 0.250 x 0.88 x 2.25" square hole spacers (CM-SP2), (2) 7/16-14 serrated flange nuts (part 20-00103), (4) M12x1.25 x 35mm hex cap screws (part 10-10275), and (4) 1/2" conical toothed washers (part 30-00149).
The CURT 12175 is designed for use with ball mount #45521 (euro mount). Ball options available are #45571 (1 7/8" ball) and #45572 (2" ball). Consult the CURT catalog or website at www.curtmfg.com for further information on these accessories.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT stabilizing straps model 18050. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
Safety glasses must be worn at all times while installing this product. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Two people may be required to ease installation.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This should be done regularly throughout the life of the hitch to maintain safe operation.
Yes. The CURT 12175 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration to, misuse, or improper installation of this product voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Locate the two weldnuts near the end of each frame rail. Clean them of debris and rust to ease hitch installation. The manual references a weldnut cleaning procedure but does not provide detailed steps. For specific cleaning instructions, contact CURT Technical Support at 877-287-8634.
Reverse fishwire refers to threading the fishwire (a flexible wire guide) through the carriage bolts and spacers in the reverse direction. You will reverse fishwire (2) 7/16-14 x 1 1/2" carriage bolts and CM-SP2 spacers into the existing hole in the bottom of the frame rails, leaving the fishwires attached. The fishwires help guide the bolts into position.
Yes, the CURT 12175 is designed for 2018-present Honda Odyssey vans. Maximum capacity: 3,500 lbs trailer weight, 350 lbs tongue weight. Always verify your vehicle's manufacturer towing capacity.
No drilling required. The hitch uses existing frame rail access holes and weldnuts. You must remove the driver side underbody panel and temporarily remove the exhaust deflector.
Ratchet, torque wrench, 9" extension, safety glasses, 11/16", 10mm, and 19mm sockets, straight screwdriver, and Phillips screwdriver.
12mm hardware: 86 lb-ft. 7/16" hardware: 59 lb-ft.
Maximum 3,500 lbs trailer weight and 350 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Designed for ball mount #45521 (euro mount). Available ball options: #45571 (1 7/8" ball) and #45572 (2" ball).
On Sale Today
Original price was $365.95. Current price is $247.99.You save $117.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$398.57$516.53
No reviews have been added for this product.
