Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2019 Infiniti QX30
Confirmed to Fit
2015 - 2020 Mercedes-Benz GLA250
Confirmed to Fit
2015 - 2019 Mercedes-Benz GLA45 AMG
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Uses pre-existing vehicle hardware for installation
Installation requires part removal, trimming of heat shield and temporary lowering of exhaust
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 600 LB / 4,000 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 600 LB
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 60
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Infiniti QX30, Mercedes-Benz GLA250 and Mercedes-Benz GLA45 AMG (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
3 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2019 | Infiniti QX30 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2015 - 2020 | Mercedes-Benz GLA250 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2015 - 2019 | Mercedes-Benz GLA45 AMG | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
Yes, the CURT Class 3 Hitch, 2", Select Infiniti QX30, Mercedes-Benz GLA250, GLA45 AMG Trailer Hitch (Part #BKDK13197) is designed to fit the 2017-2019 Infiniti QX30.
The CURT Class 3 Hitch, 2", Select Infiniti QX30, Mercedes-Benz GLA250, GLA45 AMG Trailer Hitch (Part #BKDK13197) fits the following vehicles: 2017-2019 Infiniti QX30; 2015-2020 Mercedes-Benz GLA250; 2015-2019 Mercedes-Benz GLA45 AMG. Always verify your specific year, make, and model before ordering.
The CURT Class 3 Hitch, 2", Select Infiniti QX30, Mercedes-Benz GLA250, GLA45 AMG Trailer Hitch (Part #BKDK13197) fits 2017-2019 Infiniti QX30 models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Hitch, 2", Select Infiniti QX30, Mercedes-Benz GLA250, GLA45 AMG Trailer Hitch (Part #BKDK13197) Drilling is not required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 13197 is designed for 2015-Present Mercedes GLA250 and Infiniti QX30 SUVs. Before installation, verify your hitch matches the vehicle photo and hitch illustration provided in the manual to confirm fitment.
Yes, CURT part number 13197 is designed for 2015-Present Infiniti QX30 and Mercedes GLA250 SUVs. Before installation, verify your hitch matches the vehicle photo and hitch illustration provided in the manual to confirm fitment.
The CURT 13197 is rated for a maximum of 4,000 lbs trailer weight and 600 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Required tools are: safety glasses, screwdriver, torque wrench, ratchet, 9-inch socket extension, 6mm, 8mm, 10mm, and 16mm sockets, T30 and T40 Torx bit sockets, and aviation shears. A second person may be helpful to ease installation.
No, drilling is not required. The CURT 13197 uses existing factory hardware and mounting holes. However, trimming of the heat shield and rear fascia is required on some models.
The manual does not specify whether the battery must be disconnected. Contact CURT Technical Support at 877-287-8634 for clarification before beginning installation.
Yes, trimming is required. The exhaust heat shield must be trimmed around the lower portion of the hitch to avoid contact. The approximate cutout dimensions are 1.25 inches by 4.50 inches. Some models also require trimming of the rear fascia as shown in the trim diagram. All dimensions are approximate; confirm fit prior to trimming. Use aviation shears for trimming.
The approximate cutout dimensions for the heat shield are 1.25 inches by 4.50 inches. These dimensions are approximate; confirm fit prior to trimming. Use aviation shears to trim the heat shield around the lower portion of the hitch to avoid any contact.
The rear fascia trim diagram shows approximate dimensions of 3.25 inches and 2.75 inches. These dimensions are approximate. Some models require this trim; confirm fit prior to trimming using aviation shears. Not all models require rear fascia trimming.
All M10 bolts must be torqued to 37 lb-ft. This applies to the bumper mounting bolts after the hitch is aligned and loosely fastened for fit check.
The manual specifies to reuse existing factory hardware. This includes the M10 nuts on the inner panel for bumper mounting (8 total, 4 per side), and the M6 bolts for the exhaust heat shield (6 total). All removed fasteners should be set aside for reassembly.
Yes. Apply a bead of RTV silicon sealant around the frame openings prior to installing the hitch. This is done after removing the bumper and before aligning the hitch on the bumper.
The removal order is: (1) exhaust tips (4 Torx bolts), (2) exhaust hanger bracket (2 M10 bolts), (3) tail lights (plastic wing nuts or M10 bolts depending on model), (4) plastic brackets supporting rear fascia (4 M10 bolts), (5) exhaust heat shield bolts—loosen but do not remove (6 M6 or M8 bolts), (6) rear wheel well trim pieces (unclip), (7) rear fascia (release press-in tabs or unclip sensor plugs), (8) bumper (8 M10 nuts). Set aside all removed parts and hardware for reassembly.
Align the hitch on the bumper through the weld-on bolts. Place the bumper and hitch assembly on the rear of the vehicle through the original bumper mounting holes. Loosely fasten with the M10 nuts to check fit before final torquing. Once fit is confirmed, torque all M10 bolts to 37 lb-ft.
After torquing the M10 bolts to 37 lb-ft and reattaching the heat shield with its 6 M6 bolts, follow steps 1-6 in reverse order. This means: reinstall rear wheel well trim pieces, rear fascia (secure press-in tabs), plastic brackets supporting rear fascia, tail lights, exhaust hanger bracket, and exhaust tips. Ensure all fasteners are properly secured.
The CURT 13197 is rated for 4,000 lbs trailer weight and 600 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Always follow your vehicle manufacturer's specifications.
All non-trailer loads applied to the CURT 13197 must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
After installation, verify that all fasteners are tight and all structural components are sound. Periodically check the hitch during ownership to ensure all fasteners remain tight and structural components remain in good condition.
The manual recommends periodically checking the receiver hitch to ensure all fasteners are tight and all structural components are sound. A specific interval is not provided; contact CURT Technical Support at 877-287-8634 for recommended maintenance intervals.
Yes, the CURT 13197 is designed for 2015-Present Mercedes GLA250 and Infiniti QX30 SUVs. Verify fitment by comparing your vehicle to the vehicle photo and hitch illustration in the manual.
The CURT 13197 is rated for 4,000 lbs maximum trailer weight and 600 lbs maximum tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required. The hitch uses existing factory hardware and mounting holes. However, trimming of the heat shield and rear fascia is required on some models using aviation shears.
Required tools: safety glasses, screwdriver, torque wrench, ratchet, 9-inch socket extension, 6mm/8mm/10mm/16mm sockets, T30 and T40 Torx bit sockets, and aviation shears. Two people may be helpful.
All M10 bolts must be torqued to 37 lb-ft. Use a torque wrench to ensure proper tightening.
Yes. The exhaust heat shield must be trimmed approximately 1.25 inches by 4.50 inches around the lower portion of the hitch. Some models also require rear fascia trimming. Use aviation shears and confirm fit before trimming.
Safety glasses must be worn at all times during installation. Two people may be required to ease installation. If hesitant to undertake the task, contact an authorized CURT installer.
All non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads voids the warranty.
Verify that the hitch is properly aligned on the bumper through the weld-on bolts before final tightening. Loosely fasten with M10 nuts to check fit. If fit is incorrect, recheck alignment and ensure the bumper is positioned through the original mounting holes. Do not proceed to final torquing until fit is confirmed.
The heat shield must be trimmed around the lower portion of the hitch to avoid contact. Trim the heat shield with aviation shears to approximately 1.25 inches by 4.50 inches. These dimensions are approximate; confirm fit prior to trimming. If contact persists after trimming, contact CURT Technical Support at 877-287-8634.
Some models require trimming of the rear fascia as shown in the trim diagram. All dimensions are approximate. Confirm fit prior to trimming using aviation shears. If the fascia still does not fit after trimming, contact CURT Technical Support at 877-287-8634 for assistance.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $401.95. Current price is $270.99.You save $130.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 24 - Wed, Aug 26
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$405.53$539.00
No reviews have been added for this product.