Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2017 Audi Q5
Confirmed to Fit
2015 - 2018 Porsche Macan
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 750 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 750 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 45
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q5 and Porsche Macan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2017 | Audi Q5 | Drilling Required Installation Time: 30-60 minutes Visibility: Exposed Temporary bumper fascia removal required |
| 2015 - 2018 | Porsche Macan | Drilling Required Installation Time: 30-60 minutes Visibility: Exposed Bumper fascia trimming required Temporary bumper fascia removal required |
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Porsche Macan Trailer Hitch (Part #BKDK13136) is designed to fit the 2009-2017 Audi Q5.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Porsche Macan Trailer Hitch (Part #BKDK13136) fits 2009-2017 Audi Q5 models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Porsche Macan Trailer Hitch (Part #BKDK13136) fits the following vehicles: 2009-2017 Audi Q5; 2015-2018 Porsche Macan. Always verify your specific year, make, and model before ordering.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Porsche Macan Trailer Hitch (Part #BKDK13136) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT 13136 fits Audi Q5 models from 2009 to present. The hitch is rated for 5000 lbs trailer weight and 750 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity. Note that Audi Q5-S and SQ5 models require removal of the entire bumper fascia during installation, not just the lower section.
Yes, CURT 13136 fits Porsche Macan models from 2009 to present, excluding hybrid models. The hitch is rated for 5000 lbs trailer weight and 750 lbs tongue weight. However, Porsche Macan installation requires additional steps: trunk pan drilling (2015–2016 models only; 2017 models do not require drilling), battery disconnection, audio module removal, and rear fascia trimming of approximately 1/2" × 1" on each side.
No. CURT 13136 is not compatible with hybrid models of the Audi Q5 or Porsche Macan. The manual explicitly states the product is for Audi Q5 and Porsche Macan excluding hybrid variants.
CURT 13136 is rated for a maximum of 5000 lbs trailer weight and 750 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
For Audi Q5 installation, you will need: T-20 Torx bit, 3/4" socket, 9/16" socket, 13mm socket, ratchet, torque wrench, flathead screwdriver, 10mm socket, 12" socket extension, and a marker. A power drill with 1/2" drill bit is not required for Audi models.
In addition to the standard Audi tools, Porsche Macan installation requires: T-27 Torx bit, power drill with 1/2" drill bit, and either a cut-off wheel or aviation shears for trimming the rear fascia.
Battery disconnection is required only for Porsche Macan models. For Audi Q5, the battery does not need to be disconnected. On Porsche models, disconnect the battery terminals using a 10mm socket before drilling the trunk pan mounting holes.
Spare tire removal is required only for Porsche Macan models. For Audi Q5, the spare tire does not need to be removed. On Porsche models, remove the spare tire and set it aside to clear the trunk for drilling the mounting holes.
Drilling is required only for Porsche Macan models, and only for 2015–2016 model years. Porsche 2017 models do not require drilling. For Audi Q5 models, no drilling is required. When drilling is required, you must drill 1/2" holes through the trunk pan for the mounting hardware.
Trimming is required only for Porsche Macan models. You must trim the rear fascia by approximately 1/2" × 1" on each side where the side plate interferes with the fascia. Trimming can be done with either a cut-off wheel or aviation shears. Audi Q5 models do not require trimming.
Yes. For both Audi Q5 and Porsche Macan models, you must cut around the two trunk pan plugs and return the cut-out plugs to the customer. For Porsche models, the trunk pan cover must be removed first by removing four 10mm nuts before cutting around the plugs.
Yes. When inserting the 1/2" carriage bolt and spacer into the trunk pan holes, you should apply caulk or sealant to the area between the trunk pan hole and the hitch to prevent water intrusion.
The 1/2" carriage bolts and nuts must be torqued to 110 lb-ft. This is the final torque value; initially secure the hardware lightly before raising the hitch into position, then torque to specification in sequence with the other fasteners.
The 8mm bolts that secure the exhaust hanger bracket must be torqued to 23 lb-ft. These bolts clamp the hitch mounting strap between the frame support and the hanger bracket.
The 3/8" u-bolts must be torqued to 45 lb-ft. These bolts secure the hitch to the frame rail support.
The mounting holes drilled through the trunk pan must be 1/2" in diameter. These holes accommodate the 1/2" carriage bolts and spacers.
Torque fasteners in this sequence: first torque the 1/2" hardware to 110 lb-ft, then the 8mm bolts to 23 lb-ft, and finally the 3/8" u-bolts to 45 lb-ft. All fasteners must be torqued after the hitch is raised into position.
Reinstall the bumper fascia by reversing Steps 1–2 of the installation instructions. First, reconnect the snap tabs on each side from the bumper to the support strap, then reinstall the four T-20 Torx bit screws (two from the trunk, one from each wheel well). For Porsche models, the fascia must be trimmed before reassembly.
All non-trailer (wheel-less) loads applied to CURT 13136 must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. For more information, see the CURT catalog or visit www.curtmfg.com.
Safety glasses should be worn at all times while installing CURT 13136.
After installation, periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing maintenance is important for safe operation.
Two people may be required to ease installation. While one person may be able to complete the installation, having a second person can improve the quality of the install and reduce the time required.
CURT 13136 installation is rated as moderate difficulty for Audi Q5 models. For Porsche Macan models, the installation is more challenging due to the additional steps required for drilling, battery disconnection, and fascia trimming.
CURT 13136 fits Audi Q5 (2009-present) and Porsche Macan (2009-present), excluding hybrid models. Maximum towing capacity is 5000 lbs trailer weight and 750 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended capacity.
Drilling is required only for Porsche Macan 2015–2016 models (1/2" holes in the trunk pan). Porsche 2017+ and all Audi Q5 models do not require drilling.
Trimming is required only for Porsche Macan models. Trim the rear fascia approximately 1/2" × 1" on each side using a cut-off wheel or shears. Audi Q5 models do not require trimming.
Standard tools: T-20 Torx bit, 3/4", 9/16", 10mm, and 13mm sockets, ratchet, torque wrench, flathead screwdriver, 12" extension, and marker. Porsche models also require T-27 Torx bit, power drill with 1/2" bit, and cut-off wheel or shears.
1/2" hardware: 110 lb-ft; 8mm bolts: 23 lb-ft; 3/8" u-bolts: 45 lb-ft. Torque in sequence after raising the hitch into position.
Never exceed your vehicle manufacturer's recommended towing capacity. All non-trailer loads must be supported by CURT 18050 stabilizing straps, or warranty is voided. Wear safety glasses during installation.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $375.95. Current price is $253.99.You save $121.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Tue, Aug 25 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$388.53$513.00
No reviews have been added for this product.