Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2026 Audi Q7
Confirmed to Fit
2019 - 2026 Audi Q8
Confirmed to Fit
2020 - 2026 Audi SQ7
Confirmed to Fit
2020 - 2026 Audi SQ8
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Installation requires trimming of bumper fascia
Uses pre-existing vehicle hardware for installation
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 700 LB / 7,000 LB
Weight Carrying Capacity (Pounds): 7,000 LB
WC Tongue Weight (Pounds): 700 LB
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 60
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q7 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 7,000 lbs. GTW and 700 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
4 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2026 | Audi Q7 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed Bumper fascia trimming required Temporary bumper removal required Temporary bumper fascia removal required |
| 2019 - 2026 | Audi Q8 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed Bumper fascia trimming required Temporary bumper removal required Temporary bumper fascia removal required |
| 2020 - 2026 | Audi SQ7 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed Bumper fascia trimming required Temporary bumper removal required Temporary bumper fascia removal required |
| 2020 - 2026 | Audi SQ8 | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed Bumper fascia trimming required Temporary bumper removal required Temporary bumper fascia removal required |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q7 Trailer Hitch (Part #BKDK13277) fits 2017-2026 Audi Q7 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q7 Trailer Hitch (Part #BKDK13277) fits the following vehicles: 2017-2026 Audi Q7; 2019-2026 Audi Q8; 2020-2026 Audi SQ7; 2020-2026 Audi SQ8. Always verify your specific year, make, and model before ordering.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q7 Trailer Hitch (Part #BKDK13277) is designed to fit the 2017-2026 Audi Q7.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Audi Q7 Trailer Hitch (Part #BKDK13277) Drilling is not required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
Yes, CURT 13277 is designed for the 2017 Audi Q7 SUV.
CURT 13277 has a maximum trailer weight of 7,000 lbs and a tongue weight of 700 lbs when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
Required tools: ratchet, 18mm socket, 6" socket extension, T25 Torx bit, torque wrench, tape measure, masking tape, rotary tool, plastic panel removal tools, and safety glasses.
No, drilling is not required. The hitch uses existing vehicle weldnuts for attachment.
Yes, bumper fascia trimming is required. You must measure and trim the fascia to the dimensions shown: 7.25" width, 3.50" height, and 1.75" from the center line.
All bolts securing the hitch and bumper beam must be torqued to 58 ft-lbs.
The hitch weight is 120 lbs.
Two people may be required to ease installation, though it may be possible for one person to complete it.
CURT 13277 is a weight-carrying receiver hitch designed for the 2017 Audi Q7 SUV. It allows you to tow trailers up to 7,000 lbs with a maximum tongue weight of 700 lbs, subject to your vehicle manufacturer's towing capacity limits.
CURT 13277 is specifically designed for the 2017 Audi Q7 SUV. The manual does not indicate compatibility with other model years or vehicles. Contact CURT technical support at 877-287-8634 to confirm fitment for your specific vehicle.
The manual does not specify whether the battery must be disconnected. However, you will be disconnecting electrical connectors from lights and sensors along the bumper fascia during installation. For safety, consider consulting your vehicle's service manual or contacting CURT technical support at 877-287-8634 before beginning.
The first step is to remove 4 screws along each wheel well using a T25 Torx bit screwdriver. Then pull the wheel liner back to expose an additional screw for removal.
Remove screws in this order: (1) 4 screws along each wheel well with T25 Torx bit, pull wheel liner back and remove 1 additional screw; (2) 4 screws from bottom of each wheel well liner and 4 screws from middle underside area of fascia; (3) 2 screws from body trim piece at upper wheel well. Disconnect all electrical connectors from lights and sensors. Gently pull off the bumper fascia starting near the wheels and moving towards the trunk.
Place the hitch on the end panel and the bumper beam on top of the hitch. Raise both into position, aligning the holes with the vehicle's weldnuts. Loosely secure with the 4 bolts on each side (8 bolts total) that were removed from the bumper beam. Then torque all bolts to 58 ft-lbs.
Unclip the kick sensor wire from inside the bumper fascia and move it away from the trim area. Measure the trim area on the fascia to the dimensions shown: 7.25" width, 3.50" height, and 1.75" from the center line. Mark the area with masking tape and trim the section using a rotary tool.
The kick sensor wire is unclipped from inside the bumper fascia during the trimming step and moved away from the trim area. After the fascia is reinstalled, the wire is re-attached behind the receiver tube. Note that sensors may require additional dealer recalibration after installation.
First, reinstall the fascia that was removed in step 4. Then re-attach the kick sensor wire after the fascia is fully reinstalled.
The manual notes that sensors may require additional dealer recalibration after installation. You should contact your Audi dealer to determine if recalibration is necessary for your specific vehicle and sensors.
Safety glasses must be worn at all times while installing this product.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. See the CURT catalog or visit www.curtmfg.com for further information.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This should be done regularly to maintain safe operation.
CURT 13277 has a challenging difficulty level. The manual recommends reading all instructions thoroughly before beginning and suggests that 2 people may be required to ease installation. If you are hesitant to undertake this task, contact an authorized CURT installer for assistance.
Professional installation takes approximately 40 minutes. Novice DIY installation takes approximately 120 minutes.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
CURT 13277 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Call CURT technical support at 877-287-8634. You can also visit www.curtmfg.com for more information and www.hitchinfo.com for helpful towing tips.
Use a T25 Torx bit screwdriver to remove all screws from the bumper fascia and wheel well liners. The manual specifies T25 Torx bits for all screw removal steps.
An 18mm socket is required to remove the 4 bolts on each side of the bumper beam (8 bolts total).
The 6" socket extension is listed as a required tool. It is used with the 18mm socket to reach and remove the bumper beam bolts.
A rotary tool is used to trim the bumper fascia section. Mark the trim area with masking tape using the dimensions provided (7.25" width, 3.50" height, 1.75" from center line) before trimming.
Plastic panel removal tools may be used to ease removal of the body trim piece at the upper wheel well during step 3 of the installation.
Ensure the hitch and bumper beam are raised into position correctly, aligning the holes with the weldnuts. If alignment is still difficult, weldnut cleaning may be required. Clean the weldnuts and try again. If problems persist, contact CURT technical support at 877-287-8634.
Verify that you have trimmed the fascia to the correct dimensions: 7.25" width, 3.50" height, and 1.75" from the center line. Use the trim diagram provided in the manual as a reference. If the fascia still does not fit, contact CURT technical support at 877-287-8634.
The manual notes that sensors may require additional dealer recalibration after installation. Contact your Audi dealer to have the sensors recalibrated. Ensure that the kick sensor wire has been properly re-attached behind the receiver tube after fascia reinstallation.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $383.95. Current price is $259.99.You save $123.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$394.53$521.00
No reviews have been added for this product.