Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2015 - 2024 Ford Edge
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 600 LB / 4,000 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 600 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Edge (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2024 | Ford Edge | Bumper Fascia Trimming Required - No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Ford Edge Trailer Hitch (Part #BKDK13234) fits 2015-2024 Ford Edge models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Ford Edge Trailer Hitch (Part #BKDK13234) fits the following vehicles: 2015-2024 Ford Edge. Always verify your specific year, make, and model before ordering.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Ford Edge Trailer Hitch (Part #BKDK13234) is designed to fit the 2015-2024 Ford Edge.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Ford Edge Trailer Hitch (Part #BKDK13234) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The manual does not provide the hitch weight or specific towing capacity values in the document reviewed. Contact CURT Manufacturing technical support at 1-877-287-8634 or visit www.curtmfg.com for these specifications.
CURT part 13234 is designed for the Ford Edge. However, the manual does not specify which model years or generations it fits. Contact CURT Manufacturing at 1-877-287-8634 or check www.curtmfg.com to confirm fitment for your specific vehicle year and trim level.
Yes. If your vehicle is equipped with a hands-free lift gate, perform the kick motion on the left or right side of the receiver tube to operate it. The hitch installation does not interfere with this feature.
You will need: 7/32" socket, 3/4" socket, 10mm socket, ratchet, torque wrench, aviation shears, and safety glasses. If your Ford Edge is a Sport model, you will also need a 5.5mm socket and T20 Torx bit to remove exhaust bezels.
The kit includes: 6× 1/2-13 UNC grade 8 carriage bolts (1-1/2" long), 6× 0.250 x 1.50 x 3.00" square hole spacers (CM-SP4), 6× 1/2-13 UNC grade 8 serrated flange nuts, and 4× 1/2" fishwire.
Yes. If you plan to carry non-trailer loads on this hitch, you must use CURT stabilizing straps part 18050. These are not included and are required to support any non-trailer load. Failure to use them will void the product warranty.
No. The manual states 'NO DRILLING REQUIRED'. The hitch uses existing frame mounting holes accessed through the underbody.
Yes. You must lower the exhaust by removing 2 rubber isolators mounted to the muffler. If your Ford Edge is a Sport model, you must also remove the exhaust bezels using a 5.5mm socket and T20 Torx bit. The exhaust is raised back into position after the hitch is installed.
Yes. You must remove the panels from behind the rear wheels by removing 2 hex nuts using a 10mm socket and 2 screws with a 7/32" socket. These panels are trimmed and reinstalled after the hitch is mounted.
You must trim the center underbody panel outer tabs to allow easier mounting of the hitch. You must also trim the removed underbody side panels as shown in the installation diagram to allow for reinstallation. The diagram shows trim dimensions of 1.88" and 0.75" on the center panel, and 7.25" and 3.5" on the side panels. These modifications are permanent.
Possibly. The manual notes that the washer/nut may require trimming of the washer for reinstallation of the underbody panels. Check fit during reassembly and trim if necessary.
Fishwiring is a technique to guide fasteners through difficult-to-access mounting holes. For this hitch: (1) Thread the 1/2" fishwire through 3 CM-SP4 spacers and 3 carriage bolts into the mounting holes on both frame rails. (2) Raise the hitch over the exhaust and thread the fishwires into the mounting holes. (3) Raise the hitch into position, remove the fishwires, and install the 6 supplied 1/2" hex flange nuts. This allows you to position the hitch without having to manually hold fasteners in place.
The hitch side plates will be located between the center underbody panel tabs and the frame rails.
All 1/2" fasteners must be torqued to 110 lb-ft. This includes the 6 carriage bolts and 6 hex flange nuts that secure the hitch to the frame.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT will repair or replace it at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Non-trailer loads can be carried only if they are supported by CURT stabilizing straps part 18050. All non-trailer loads must be supported by these straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch is designed to support the Ford Edge's factory towing limits. Consult your vehicle owner's manual for the specific capacity.
After installation, verify that all fasteners are tight and all structural components are sound. Periodically check the receiver hitch to ensure that all fasteners remain tight and that all structural components are sound. This is especially important before towing.
Periodically check this receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended.
CURT 13234 is designed for the Ford Edge. Confirm your specific model year with CURT at 1-877-287-8634 or www.curtmfg.com.
You need: 7/32", 3/4", and 10mm sockets, ratchet, torque wrench, aviation shears, and safety glasses. Sport models also need a 5.5mm socket and T20 Torx bit.
No drilling is required. The hitch uses existing frame mounting holes. However, you must lower the exhaust and trim underbody panels.
All 1/2" fasteners must be torqued to 110 lb-ft.
Yes. CURT stabilizing straps part 18050 are required for any non-trailer load. Failure to use them voids the warranty.
Verify all fasteners are tight and all structural components are sound. Periodically recheck before towing.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $334.95. Current price is $226.99.You save $107.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Wed, Sep 23 - Fri, Sep 25
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$361.53$472.00
No reviews have been added for this product.