CURT Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona 13606CURTOriginal price was $375.95. Current price is $253.99.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2024 - 2025 Hyundai Kona
Confirmed to Fit
2024 - 2025 Hyundai Kona Electric
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Color: Black
Finish: Blank
WC / TW (Pounds): 200 / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200
Installation Difficulty: Easy
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Kona N-Line and EV (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Limited Lifetime (One-year finish, one-year parts)
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2024 - 2025 | Hyundai Kona | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed |
| 2024 - 2025 | Hyundai Kona Electric | No Drilling Required Installation Time: 60-90 minutes Visibility: Concealed Undercar trimming (not fascia) required |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona N-Line, EV (Part #BKDK13608) fits the following vehicles: 2024-2025 Hyundai Kona; 2024-2025 Hyundai Kona Electric. Always verify your specific year, make, and model before ordering.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona N-Line, EV (Part #BKDK13608) is designed to fit the 2024-2025 Hyundai Kona.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona N-Line, EV (Part #BKDK13608) fits 2024-2025 Hyundai Kona models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona N-Line, EV (Part #BKDK13608) Drilling is not required for installation. Typical installation time is 60-90 minutes. Basic hand tools are typically all you need.
The CURT 13608 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, CURT 13608 fits Hyundai Kona EV models. Installation requires trimming of the rearmost underbody bumper panel using a rotary tool. The trim cutout is approximately 4-1/2" wide by 4" tall, as shown in the trim diagram on page 4.
Yes, CURT 13608 fits Hyundai Kona gasoline models. Gasoline models with an exhaust require lowering of the exhaust during installation by removing the two rearmost exhaust hanger rods from both sides from their rubber isolators. The exhaust is reinstalled after the hitch is mounted.
Required tools are: ratchet, 10mm socket, 14mm socket, 17mm socket, 6" socket extension, torque wrench, flathead screwdriver, rotary tool, tape, and tape measure. A tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The kit includes six M10-1.25 x 40mm Class 8.8 hex bolts and six 3/8" conical-toothed washers. These bolts and washers are installed into the vehicle's existing weld nuts on the frame.
The manual does not specify whether battery disconnection is required. Contact CURT product support at 877.287.8634 for clarification.
The installation is rated as moderate difficulty. The manual does not specify whether professional installation is required or recommended. Contact CURT product support at 877.287.8634 if you have concerns about your ability to complete the installation.
Yes. If your vehicle has an exhaust, you must place a support stand under the exhaust to prevent damage to the vehicle when the exhaust hanger rods are removed during installation.
To remove debris from the weld nuts in the frame, spray lubricant or compressed air into the hole. For heavy debris, use a wire brush. Take care not to damage the threads.
No drilling is required. The hitch uses the vehicle's existing weld nuts on the frame. However, Kona EV models require trimming of the rearmost underbody bumper panel using a rotary tool. The trim cutout is approximately 4-1/2" wide by 4" tall.
The trim cutout for the rearmost underbody bumper panel on Kona EV models is approximately 4-1/2" wide by 4" tall. Use a tape measure, tape, and rotary tool to mark and trim the panel.
Torque the six M10 bolts to 33.4 ft-lbs using a torque wrench, 17mm socket, and extension if needed.
For Kona EV models: (1) Detach the frontmost underbody panel by unscrewing two 10mm hex nuts and pull it down. (2) Remove six plastic clips and unscrew four 14mm plastic hex nuts from the rearmost underbody panel, then pull it down. (3) Mark and trim the rearmost panel using a rotary tool (approximately 4-1/2" × 4"). (4) Raise the hitch into position. (5) Install six M10 bolts and conical-toothed washers into the frame weld nuts using a 17mm socket. (6) Torque bolts to 33.4 ft-lbs. (7) Reinstall the panels, clips, and nuts in reverse order.
For gasoline models with exhaust: (1) Lower the exhaust by removing the two rearmost exhaust hanger rods on both sides from their rubber isolators. Place a support stand under the exhaust. (2) Raise the hitch over the exhaust on the passenger side first. Gently pull the bumper facia rearward if needed. (3) Install six M10 bolts and conical-toothed washers into the frame weld nuts using a 17mm socket. (4) Torque bolts to 33.4 ft-lbs. (5) Reinstall the exhaust onto the hanger rods in reverse.
Remove the two rearmost exhaust hanger rods on both sides from their rubber isolators. If exhaust hanger removal pliers are not available, use a 5/8" open end wrench: slide the wrench up to the rubber isolator, cradling the hanger rod. Place the flat edge of a pry bar between the wrench and the hanger stop or hanger rod, then rotate the pry bar toward the wrench to remove the rubber isolator. Using lubricant or soapy water on the hanger rod and isolator helps removal.
The conical-toothed washers are installed with the conical teeth facing the vehicle frame. See the Conical Toothed Washer Orientation diagram on page 2 for the correct positioning.
Safety glasses should be worn at all times while installing this product. If your vehicle has an exhaust, place a support stand under the exhaust to prevent damage to the vehicle when the hanger rods are removed. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the inspection interval. Contact CURT product support at 877.287.8634 for recommended inspection frequency.
The manual specifies that bolts should be torqued to 33.4 ft-lbs during installation but does not specify whether retorque is required at a later interval. Contact CURT product support at 877.287.8634 for retorque recommendations.
Yes, CURT 13608 fits Hyundai Kona gasoline and EV models. Gasoline models may require exhaust lowering; EV models require underbody panel trimming.
You need a ratchet, 10mm/14mm/17mm sockets, 6" socket extension, torque wrench, flathead screwdriver, rotary tool, tape, and tape measure.
Torque the six M10 bolts to 33.4 ft-lbs using a torque wrench and 17mm socket.
Gross trailer weight capacity is 2,000 lbs; tongue weight capacity is 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, place a support stand under the exhaust when removing the hanger rods to prevent vehicle damage.
Installation is rated as moderate difficulty. Proper tools and careful attention to the sequence are required. Contact CURT at 877.287.8634 if you have concerns about your ability to complete the installation.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $375.95. Current price is $253.99.You save $121.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.