Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2016 - 2020 Lexus RX450h
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires underbody panel trimming and tow loop removal
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 600 LB / 4,000 LB
WD / WDTW (Pounds): 5,000 LB / 600 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 600 LB
Weight Distribution (Pounds): 5,000 LB
WD Tongue Weight (Pounds): 600 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Lexus RX450h (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2020 | Lexus RX450h | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Lexus RX450h Trailer Hitch (Part #BKDK13282) is designed to fit the 2016-2020 Lexus RX450h.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Lexus RX450h Trailer Hitch (Part #BKDK13282) fits the following vehicles: 2016-2020 Lexus RX450h. Always verify your specific year, make, and model before ordering.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Lexus RX450h Trailer Hitch (Part #BKDK13282) fits 2016-2020 Lexus RX450h models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Lexus RX450h Trailer Hitch (Part #BKDK13282) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 13282 is designed for 2016-present Lexus RX450h SUVs. Verify your vehicle matches this year range and model before purchase.
The CURT 13282 supports two towing configurations: as a weight-carrying hitch, 4,000 lbs trailer weight and 600 lbs tongue weight; as a weight-distribution hitch, 5,000 lbs trailer weight and 600 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The hitch weight is 30 lbs.
Required tools are: ratchet, torque wrench, 9-inch socket extension, 10mm/17mm/19mm sockets, screwdriver, aviation shears, masking tape, tape measure, and safety glasses. Proper tools will improve installation quality and reduce installation time.
Yes. All 12mm fasteners must be torqued to 86 ft-lbs, which requires a torque wrench.
The hitch includes 6 HHCS M12x1.25 40CL10.9 YZ bolts (part number 10-10277) and 6 washers S-CON 1/2 YZ (part number 30-00149). These fasteners secure the hitch to the existing frame weldnuts.
No. The manual states 'no drilling required.' The hitch aligns with existing weldnuts in the frame.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that using proper tools will improve installation quality and reduce time required.
Professional installation time is approximately 60 minutes. Novice (DIY) installation time is approximately 39 minutes for the core steps, though total time including fascia trimming may be longer. Actual time depends on your experience level and familiarity with the vehicle.
The first step is to temporarily remove the lower fascia by removing 13 fasteners. This provides access to the frame rails and tow loops.
Using a 17mm socket, remove the tow loops from both the driver and passenger side frame rails. Also remove the existing hole plugs from the frame rails. Return the fasteners and plugs to the vehicle owner.
Raise the hitch into position by aligning it with the existing weldnuts in the frame. Secure the hitch with 12mm bolts and 1/2-inch conical toothed washers into the existing weldnuts. If the tow loop is being reinstalled, the hitch will be clamped between the tow loop and frame rail.
All 12mm fasteners must be torqued to 86 ft-lbs.
The lower fascia must be trimmed as needed to fit around the installed hitch. The manual provides a trim diagram showing reference measurements of 6.00 inches and 4.50 inches. Use aviation shears for trimming, and reinstall the fascia after trimming is complete.
Yes. The manual indicates that trimming of the lower fascia is required and shows specific trim measurements (6.00 inches and 4.50 inches). This is a permanent modification to the vehicle's fascia.
The installation notes mention 'weldnut cleaning' as part of the installation process. The manual does not specify the exact cleaning method or materials required. Contact CURT Technical Support at 877-287-8634 for detailed guidance on this step.
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Never exceed your vehicle manufacturer's recommended towing capacity. While the CURT 13282 supports up to 4,000 lbs trailer weight and 600 lbs tongue weight as a weight-carrying hitch (or 5,000 lbs trailer weight and 600 lbs tongue weight as a weight-distribution hitch), your Lexus RX450h may have a lower manufacturer-recommended limit that must be observed.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the safety and integrity of the installation.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
The CURT 13282 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $383.95. Current price is $259.99.You save $123.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$394.53$521.00
No reviews have been added for this product.