Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2023 - 2026 Toyota Crown
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Color: Black
Finish: Blank
WC / TW (Pounds): 350 lbs / 3,500 LBS
Weight Carrying Capacity (Pounds): 3,500 LBS
WC Tongue Weight (Pounds): 350 lbs
Installation Difficulty: Moderate
Installation Time Exact (Minutes): 60
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Crown (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Limited Lifetime (One-year finish, one-year parts)
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2023 - 2026 | Toyota Crown | Installation Time: 30-60 minutes Visibility: Concealed No Drilling Required Hole Enlargement: Yes Fascia Trimming: Yes |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Toyota Crown 13582 (Part #BKDK13582) fits 2023-2026 Toyota Crown models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Toyota Crown 13582 (Part #BKDK13582) is designed to fit the 2023-2026 Toyota Crown.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Toyota Crown 13582 (Part #BKDK13582) fits the following vehicles: 2023-2026 Toyota Crown. Always verify your specific year, make, and model before ordering.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Toyota Crown 13582 (Part #BKDK13582) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The CURT 13582 has a gross trailer weight (GTW) capacity of 3,500 lbs. and a tongue weight (TW) capacity of 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
No, drilling is not required. However, hole enlargement is required using a die grinder to enlarge the existing rubber frame plugs to accept the carriage bolts and square hole spacers.
Yes. You must trim the lower bumper cover access doors and the center lower bumper tab. The manual provides a diagram showing the trim areas. You will also need to remove the recovery loop and lower the exhaust system temporarily during installation.
Required tools: 10mm, 12mm, 13mm, 17mm, and 3/4" sockets; 3" socket extension; ratchet; torque wrench; die grinder; aviation shears or knife; and an exhaust isolator removal tool. A 5/8" open-end wrench and pry bar can substitute for the isolator removal tool if needed.
The kit includes: 2 fishwires (7/16"), 2 square hole spacers (0.25" × 0.88" × 2.25"), 2 carriage bolts (7/16"-14 UNC, 1-3/4"), 2 serrated-flange nuts (7/16"-14 UNC), 4 hex head cap screws (M8 × 1.25"), 4 flat washers (5/16"), and 4 lock washers (5/16").
The manual does not specify whether battery disconnection is required. Contact CURT product support at 877-287-8634 for clarification before beginning installation.
You do not need to fully remove the exhaust system, but you must temporarily lower it. This involves unhooking the two rubber isolators from the muffler (one on each side), removing the isolators from the mounting brackets, and removing the two mounting brackets with a 12mm socket. The bolts should be returned to the vehicle owner. The exhaust is reinstalled in Step 10.
The exhaust isolator removal tool is a specialized tool for unhooking rubber isolators from the muffler. If you do not have this tool, you can use a 5/8" open-end wrench and a pry bar instead. Slide the wrench up to the rubber isolator, cradling the hanger rod, then place the flat edge of the pry bar between the wrench and the hanger stop or rod and rotate the pry bar toward the wrench. Using lubricant or soapy water on the hanger rod and isolator helps with removal.
The reverse pull fishwire technique is used to guide carriage bolts through the frame rails. Attach the fishwire to the carriage bolt, slide the square hole spacer onto the fishwire, push the bolt through the hole followed by the spacer, then pull the bolt back into position so it protrudes from the frame. The fishwires remain attached until Step 8, when they are removed and replaced with hex flange nuts.
Follow this sequence: (1) Remove the two bolts from the lower bumper cover access doors with a 10mm socket (Step 1). (2) Remove the two bolts from the recovery loop with a 17mm socket (Step 2). (3) Lower the exhaust by unhooking the rubber isolators and removing the mounting brackets with a 12mm socket (Step 3). (4) Trim the bumper cover and center lower bumper tab (Step 4). (5) Remove the rubber frame plugs and enlarge the holes with a die grinder (Step 5).
Raise the hitch into position by angling the side plates over the exhaust pipes and the main cross member tube over the bumper cover and into the bumper cavity. While raising the hitch, thread the fishwires into the mounting holes. The hitch side plates will sit between the frame and the exhaust mounting brackets.
You must trim the lower bumper cover access doors and the center lower bumper tab. The manual provides a diagram showing the trim areas. Use aviation shears or a knife for this task.
Remove the rubber frame plugs from the bottom of the frame rails on both sides. Using a die grinder, enlarge the holes to accept the supplied 7/16" carriage bolts and square hole spacers. The manual does not specify the final hole size; consult the manufacturer if you need exact dimensions.
Torque all M8 bolts (hex head cap screws) to 23 ft-lbs. Torque all 1/2" fasteners (the 7/16"-14 UNC carriage bolts with serrated-flange nuts) to 110 ft-lbs. Use a torque wrench to ensure proper tightening.
Torque all M8 bolts (hex head cap screws) to 23 ft-lbs.
Torque all 1/2" fasteners (the 7/16"-14 UNC carriage bolts with serrated-flange nuts) to 110 ft-lbs.
Safety glasses should be worn at all times while installing this product. Never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify an inspection interval; contact CURT product support at 877-287-8634 for recommended maintenance schedules.
Yes, the recovery loop can be optionally reinstalled backwards from its original position into the previously used frame weldnuts with the original fasteners. This is optional and not required for hitch operation.
No drilling required, but hole enlargement with a die grinder is needed. Bumper trimming and temporary exhaust lowering are also required.
10mm, 12mm, 13mm, 17mm sockets; torque wrench; die grinder; aviation shears; and exhaust isolator removal tool (or 5/8" wrench and pry bar).
M8 bolts: 23 ft-lbs. 1/2" fasteners (carriage bolts): 110 ft-lbs. Use a torque wrench for all fasteners.
Gross trailer weight: 3,500 lbs. Tongue weight: 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Safety glasses must be worn at all times during installation.
Yes. You must temporarily lower the exhaust by unhooking the rubber isolators from the muffler and removing the mounting brackets. The exhaust is reinstalled after the hitch is secured.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
Total for 5 items:
$405.53$539.00
On Sale Today
Original price was $401.95. Current price is $270.99.You save $130.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 17 - Wed, Aug 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.