Gear Packs & Hardware

Lippert RV Slide-Out Plastic Wear Tab #103480Lippert$22.30In Stock

Plastic wear tab for inboard and outboard slide-outs
Compatible with electric and hydraulic slide-out systems
One tab per package
DIY installation, no professional service required

Compare

Lippert Replacement 2 x 2 Through-Frame Slide-Out Gear Pack Assembly without Roll Pins #281331Lippert$108.32In Stock

2 x 2 through-frame slide-out gear pack assembly
15-tooth gear configuration for post-October 2013 models
Genuine Lippert OEM replacement component
Gear pack only, roll pins sold separately

Compare

Lippert Replacement Nason Pressure Switch, 2,150 PSI #CD-GB-2150/WD194Lippert$193.49In Stock

2,150 PSI rated pressure switch for hydraulic systems
Deutsch DT-04-2P plug-and-play connector, all-weather construction
Compatible with Lippert hydraulic leveling systems since 2007
Also fits Lippert hydraulic slide-out units

Compare

Lippert HYDAC Replacement Hydraulic Slide-Out Cartridge Valve #WS08W-01T-C-N-0Lippert$178.43In Stock

Genuine Lippert HYDAC cartridge valve replacement part
12-volt coil sold separately, valve only
Manual override capability for power failure operation
Turn-and-lock set screw stem design

Compare

Lippert RV Slide-Out 2 x 3 & 3 x 3 Standard Gear Pack Assembly #140409Lippert$121.85In Stock

15-tooth gear pack assembly for through-frame RV slide-outs
Fits 2x3 and 3x3 tubing slide arm systems
Drop-in replacement, no assembly required
DIY installation without professional technician needed

Compare

Lippert RV Slide-Out 26-Tooth Crown Gear - 12 DP/14.5 PA #116658Lippert$33.68In Stock

26-tooth crown gear for Lippert above-floor slide-outs
12 DP diametric pitch, 14.5-degree pressure angle
Exact OEM-match replacement, no assembly required
DIY installation without special tools needed

Compare

LIPPERT 24 Tooth Spur Gear - 12 DP/14.5 PALippert$57.50In Stock

24-tooth spur gear, 12 DP, 14.5 PA
Replacement part for Electric 2x3 and 3x3 slide-outs
Through-frame slide-out compatible
Direct OEM replacement for Lippert systems

Compare

Lippert Replacement 2.5 x 2.5 Heavy-Duty RV Through-Frame Slide-Out Gear Pack Assembly #123356Lippert$170.50In Stock

Genuine Lippert replacement for Through-Frame slide-outs only
Gear pack component only, complete assembly not included
DIY installation, no professional technician required
Pre-October 2013 units require 18-tooth gear instead

Compare

Lippert RV Slide-Out 2.5 x 2.5 Standard Gear Pack #324869Lippert$115.31In Stock

2.5 x 2.5 standard gear pack, 15-tooth configuration
Through-Frame slide-out systems only
DIY installation, no assembly required
Exact OEM-match replacement part

Compare

Lippert RV Slide-Out Bearing - 3/8-24 Thread x 1-3/8" L #118353Lippert$42.94In Stock

3/8-24 thread x 1-3/8 inch length bearing
Lippert Above-Floor slide-out systems only
No assembly required, DIY installation
Exact OEM replacement part match

Compare

Lippert RV Slide-Out Stop Can Assembly #122840Lippert$39.86In Stock

Replacement stop can assembly for through-frame RV slide-outs
Includes stop can tube and stop can plug
Adjustable seal position prevents water damage to RV
Screw in/out and tighten nut to reposition seal

Compare

Rebuild a sticking or noisy slide-out mechanism piece by piece instead of replacing the whole unit. Sizes span compact 2x2 setups up to heavier-duty 3x3 through-frame configurations, with individual gears, bearings and wear tabs for mechanical drives, plus a cartridge valve and pressure switch for hydraulic systems.

Gear Packs & Hardware

Brand