toll-free +888-634-9494 sales@towuniverse.com

FAST FREE SHIPPING!

Dealer Hub Installers Near Me My Orders About Us Blog Contact Us

Slide-Out

Electrical Part

Gear Packs & Hardware

Hydraulic Cylinders & Trunnions

Motors & Actuators

In-Wall Replacement Part

Slide-Out Accessory

Lippert RV Slide-Out Plastic Wear Tab #103480Lippert$22.30In Stock

Plastic wear tab for inboard and outboard slide-outs
Compatible with electric and hydraulic slide-out systems
One tab per package
DIY installation, no professional service required

Compare

Lippert 39" Hydraulic Cylinder with 24" Stroke; 1-1/2" Bore (Black)Lippert$334.37In Stock

39 inch total length with 24 inch stroke
1.5 inch bore diameter hydraulic cylinder
Faster operation than electric slide-out systems
Black finish resists corrosion

Compare

Lippert 53" Hydraulic Cylinder with 38" Stroke; 1-1/2" Bore; 3/4"-10 ThreadLippert$427.46In Stock

53 inches total length, 38 inches stroke
1-1/2 inch bore with 3/4-10 thread
Hydraulic cylinder for Lippert Through Frame Slide
Faster operation than electric slide-out systems

Compare

Lippert Replacement 2 x 2 Through-Frame Slide-Out Gear Pack Assembly without Roll Pins #281331Lippert$110.08In Stock

2 x 2 through-frame slide-out gear pack assembly
15-tooth gear configuration for post-October 2013 models
Genuine Lippert OEM replacement component
Gear pack only, roll pins sold separately

Compare

Lippert Replacement Nason Pressure Switch, 2,150 PSI #CD-GB-2150/WD194Lippert$199.18In Stock

2,150 PSI rated pressure switch for hydraulic systems
Deutsch DT-04-2P plug-and-play connector, all-weather construction
Compatible with Lippert hydraulic leveling systems since 2007
Also fits Lippert hydraulic slide-out units

Compare

Lippert RV Slide-Out 28:1 Venture Motor #8532-08JLippert$932.91In Stock

28:1 gear ratio Venture motor for Through-Frame slide-outs
Compatible with 2×2 and 2.5×2.5 Lippert slide-out frames
Direct OEM replacement, no assembly required
Works with Venture actuator systems

Compare

Lippert Venture Replacement 40" Through-Frame Slide-Out Room High-Speed Actuator #145595Lippert$571.84In Stock

40-inch through-frame slide-out actuator assembly only
High-speed Venture actuator for Lippert systems
Motor and slide-out assembly not included
Genuine Lippert OEM replacement component

Compare

LIPPERT Actuator MotorLippert$670.08In Stock

Compare

Lippert Replacement Dual-Polarity Solenoid with Silver / Bronze Alloy Posts #118246Lippert$168.74In Stock

Dual-polarity solenoid for Lippert hydraulic leveling systems
Silver and bronze alloy posts for corrosion resistance
Reverses permanent magnet DC motor polarity without assembly
Solenoid only; leveling pump and valves sold separately

Compare

Lippert Replacement SlimRack In-Wall Slide-Out Motor with Brake - 42mm Mid-Torque #1510000227Lippert$786.31In Stock

42mm mid-torque motor with integrated brake mechanism
Genuine Lippert replacement for SlimRack In-Wall slide-outs
Motor assembly only—complete slide-out not included
No assembly required—direct drop-in replacement part

Compare

Lippert RV Slide-Out 2.5 x 2.5 Standard Gear Pack #324869Lippert$117.21In Stock

2.5 x 2.5 standard gear pack, 15-tooth configuration
Through-Frame slide-out systems only
DIY installation, no assembly required
Exact OEM-match replacement part

Compare

Lippert RV Slide-Out Controller #10665Lippert$177.55In Stock

Replacement controller for above-floor and through-frame slide-outs
Exact-match OEM component, no assembly required
DIY installation, wire harness sold separately
Compatible with standard RV slide-out systems

Compare

Rebuilding a slide-out means matching the drive system already on the coach: through-frame or in-wall motors, gear packs sized 2x2 up to 3x3, hydraulic cylinders with different bore and stroke lengths, plus the controllers, harnesses and switches that tie the mechanism together. Check existing part numbers before ordering a replacement.

Slide-Out

Categories

Brand