UWS Bright Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SLUWSOriginal price was $584.95. Current price is $530.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Tub Style
Profile
Finish
2009 - 2010 Hummer H3T
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. This particular box features a slim-line design, providing adequate clearance for truck beds that have extremely limited space between the wheel wells and truck cab. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
21 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2023 - 2026 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 2001 - 2004 | Chevrolet S10 | Crew Cab Pickup | 4'7" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 7'5" Bed | — |
| 2023 - 2026 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
| 2001 - 2004 | GMC Sonoma | Crew Cab Pickup | 4'7" Bed | — |
| 1994 - 2003 | GMC Sonoma | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 7'5" Bed | — |
| 2006 - 2014 | Honda Ridgeline | Crew Cab Pickup | 5' Bed | — |
| 2009 - 2010 | Hummer H3T | Crew Cab Pickup | 4'11" Bed | If your model is equipped with a factory track-system, standard box-mounting may not apply. |
| 2003 - 2004 | Mazda B2300 | Extended Cab Pickup | 6' Bed | — |
| 2001 - 2009 | Mazda B2300 | Standard Cab Pickup | 6' Bed | — |
| 1998 - 2000 | Mazda B2500 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2001 | Mazda B2500 | Standard Cab Pickup | 6' Bed | — |
| 1999 - 2007 | Mazda B3000 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2007 | Mazda B3000 | Standard Cab Pickup | 6' Bed | — |
| 2000 - 2004 | Nissan Frontier | Crew Cab Pickup | 4'8" Bed | — |
| 2000 - 2004 | Nissan Frontier | Crew Cab Pickup | 6'3" Bed | — |
| 1996 - 2004 | Toyota Tacoma | Standard Cab Pickup | 6'2" Bed | — |
The UWS Gloss Black Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SL-BLK (Part #BHSGTBS-60-SL-BLK) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Gloss Black Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SL-BLK (Part #BHSGTBS-60-SL-BLK) fits the following vehicles: 2023-2026 Chevrolet Colorado; 1994-2004 Chevrolet S10; 2023-2026 GMC Canyon; 1994-2004 GMC Sonoma; 2006-2014 Honda Ridgeline; 2009-2010 Hummer H3T; 2001-2009 Mazda B2300; 2000-2001 Mazda B2500; 2000-2007 Mazda B3000; 2000-2009 Mazda B4000; 1998-2004 Nissan Frontier; 1996-2004 Toyota Tacoma. Always verify your specific year, make, and model before ordering.
Yes, the UWS Gloss Black Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SL-BLK (Part #BHSGTBS-60-SL-BLK) is designed to fit the 2023-2026 Chevrolet Colorado.
The UWS Gloss Black Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SL-BLK (Part #BHSGTBS-60-SL-BLK) fits 2023-2026 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Gloss Black Aluminum 60" Slim-Line Crossover Truck Tool Box TBS-60-SL-BLK (Part #BHSGTBS-60-SL-BLK) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is included with some models but not all. Check your specific product documentation to confirm whether the divider tray is included with your purchase.
The manual does not specify which truck models, bed lengths, cab styles or drivetrains are compatible with this tool box. Contact CURT Group at 877.287.8634 or consult your dealer before purchasing to confirm fitment for your specific vehicle.
You must verify clearance during installation. In Step 1, open the tool box lid and ensure there is clearance between the open lid, top and back of the cab before finalizing placement. If clearance is insufficient, the tool box may not be suitable for your vehicle or cab style.
You will need a ratchet, socket set, and tape measure. The installation is rated as Easy difficulty.
The manual does not explicitly state whether drilling is required for this model. However, it includes a warning to check under your truck before drilling to ensure the drill location does not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components. Contact CURT Group at 877.287.8634 to confirm whether drilling is necessary for your specific installation.
Before drilling, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Take precaution that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in any holes to prevent corrosion.
Place the tool box in the truck bed and check clearance with the lid open. Attach the adhesive side of the rail pads to the underside of the tool box ends. Place the tool box with the rail pads adhered on top of the truck bed rails. Using a tape measure, ensure the tool box is centered in the truck bed. Open the tool box lid and verify there is clearance between the open lid, top and back of the cab.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a washer and nut. Snug the hardware but do not fully tighten. Repeat on the other side of the vehicle. After re-measuring to ensure the tool box is centered and allows lid clearance when open, fully tighten all hardware.
1. Place the tool box in the truck bed and check clearance with the lid open. Attach rail pads to the underside of the tool box ends and place on the truck bed rails. Center the tool box and verify lid clearance with the cab. 2. Place J-hooks under the bed rail lips, insert threaded ends through slots, and attach with washers and nuts. Snug but do not fully tighten. Re-measure for centering and lid clearance. 3. Fully tighten all hardware. 4. Adjust strikers if needed and lubricate them and locks for optimum performance.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If purchasing additional hardware, use the torque specifications provided with that hardware.
Rail pads are adhesive-backed pads that attach to the underside of the tool box ends. Attach the adhesive side of each rail pad to the underside of the tool box ends, then place the tool box with the rail pads adhered on top of the truck bed rails. Two rail pads are included.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them. Periodically lubricate the strikers and locks to ensure optimum performance.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion.
Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box's own weight capacity. Contact CURT Group at 877.287.8634 for the product's capacity rating.
Yes. This product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product.
No. Do not interfere with factory-installed safety equipment. Ensure your installation does not obstruct or damage any factory safety systems.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Periodically lubricate the strikers and locks to ensure optimum performance.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. The manual does not specify exact intervals. Contact CURT Group at 877.287.8634 for recommended re-torque intervals.
No. Never modify this product. Do not use this product for purposes other than those for which it was designed.
Consult your dealer or contact CURT Group at 877.287.8634 or visit UWSTA.COM if you have any questions regarding the installation, operation, use and limits of this product.
The manual does not specify compatible vehicle models or bed lengths. Contact CURT Group at 877.287.8634 or your dealer to confirm fitment before purchasing.
You need a ratchet, socket set, and tape measure. Installation is rated as Easy.
The manual does not explicitly state whether drilling is required. Contact CURT Group at 877.287.8634 to confirm for your specific installation.
3 ft-lbs. This is a general guideline; if purchasing additional hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials or hazardous waste such as gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks or cutting torches. Danger of explosion.
Ensure all bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
Use mild automotive detergent. Do not use dish detergent, abrasive cleaners, abrasive pads or wire brushes. For smooth finishes, polish may be used to clear small scratches.
On Sale Today
Original price was $723.95. Current price is $656.95.You save $67.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Tue, Aug 11 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.