Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2001 - 2005 Pontiac Aztek
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Warranty | One-Year Limited Warranty |
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2001 - 2005 | Pontiac Aztek | — |
Yes, the 01-05 Pontiac Aztek CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2117) is designed to fit the 2001-2005 Pontiac Aztek.
The 01-05 Pontiac Aztek CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2117) fits 2001-2005 Pontiac Aztek models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The 01-05 Pontiac Aztek CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2117) fits the following vehicles: 2001-2005 Pontiac Aztek. Always verify your specific year, make, and model before ordering.
The 01-05 Pontiac Aztek CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2117) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55383 custom wiring harness is designed for Buick Rendezvous models. It is also compatible with Pontiac Aztek. The harness is designed for SUVs, mini and full-sized vans.
Yes, the Curt 55383 custom wiring harness is designed for Pontiac Aztek models. It is also compatible with Buick Rendezvous. The harness is designed for SUVs, mini and full-sized vans.
The Curt 55383 custom wiring harness is designed for Buick Rendezvous and Pontiac Aztek models. It is classified for SUVs, mini and full-sized vans.
You will need a Phillips screwdriver, flat blade screwdriver, and panel trim removal tool. A utility knife is also required to slit the grommets. A drill with a 3/32" bit is needed to create a pilot hole for the ground wire screw.
You must remove the rear storage compartment doors, threshold plate, and both taillight assemblies. The taillight assemblies are secured by two screws on the inboard side of each taillight. You will also need to pull back the rear side-trim panels by removing the two cargo hold brackets securing them on both sides.
Pull the rubber grommets away from the vehicle body to expose the electrical connectors. Gently lift the locking tabs and separate the electrical connectors. Take care not to damage the alignment tabs on the back of the connectors.
Route the connector with the green wire up through the storage compartment, behind the rear trim panel, and out the passenger-side rear taillight. Insert the custom wiring harness between the separated connectors, ensuring the connectors are fully inserted with locking tabs in place.
Route the connectors with the yellow and brown wires through the passenger side storage compartment and behind the passenger-side rear trim panel. Continue routing underneath the threshold, behind the driver-side rear trim panel and out the driver-side taillight. Plug the custom wiring harness between the separated connectors, ensuring they are fully inserted with locking tabs in place.
You should first locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing point is available, you will need to drill a 3/32" pilot hole for the provided screw. The area should be free of rust, dirt and paint before securing the white ground wire using the ring terminal and provided screw.
Drill a 3/32" pilot hole for the provided ground wire screw. The area should be free of rust, dirt and paint before installation.
Yes. With the vehicle wiring and grommets exposed, slit the grommets with a utility knife as needed to allow the custom wiring harness to pass through. Place the custom wiring harness in the slit of the grommet, reseat the grommet, and use the provided sealant to seal the cut in the grommet and around all the wires.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire. Consult your vehicle owner's manual or contact the vehicle manufacturer for your specific tow vehicle lamp load rating.
Test the installation with a test light or by connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
When not in use, roll up the 4-flat connector and store it in a convenient, out of the way location inside the trunk. When in use, route the 4-flat to the center of the vehicle and out of the trunk. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation, including the rear storage compartment doors, threshold plate, taillight assemblies, and rear side-trim panels. Install the provided 4-flat dust cover to help prevent corrosion.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
Yes, the Curt 55383 custom wiring harness is designed for Buick Rendezvous and Pontiac Aztek models.
You need a Phillips screwdriver, flat blade screwdriver, panel trim removal tool, utility knife, and a drill with a 3/32" bit.
Yes, you must remove both taillight assemblies by removing the two screws on the inboard side of each taillight and separating the electrical connectors.
Yes, you must slit the grommets with a utility knife to route the wiring harness, and may need to drill a 3/32" pilot hole for the ground wire screw if no existing grounding point is available.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Total for 4 items:
$157.71
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
