Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2004 - 2007 Ford Freestar
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Electrical System Type | 2W |
| Finish | N/A |
| Side Application Type Description | Blank |
| T-Connector Location | S6 |
| Warranty | One-Year Limited Warranty |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2004 - 2007 | Ford Freestar | — |
The 04-07 Ford Freestar CURT 4-flat Plug and Play Trailer Wiring (Part #CTW946) fits the following vehicles: 2004-2007 Ford Freestar. Always verify your specific year, make, and model before ordering.
The 04-07 Ford Freestar CURT 4-flat Plug and Play Trailer Wiring (Part #CTW946) fits 2004-2007 Ford Freestar models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 04-07 Ford Freestar CURT 4-flat Plug and Play Trailer Wiring (Part #CTW946) is designed to fit the 2004-2007 Ford Freestar.
The 04-07 Ford Freestar CURT 4-flat Plug and Play Trailer Wiring (Part #CTW946) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part 56073 is designed for Ford Freestar and Mercury Monterey models. The installation manual specifically covers these two vehicles.
Curt part 56073 is a trailer wiring harness T-connector designed to integrate trailer lighting with the factory taillight wiring on Ford Freestar and Mercury Monterey vehicles.
You will need three relays and two 20 amp mini fuses. The relays are inserted into positions 29, 30, and 31 in the main fuse center, and the 20 amp mini fuses are inserted into positions 46 and 52. These items are not included with the product and must be purchased separately.
The taillight wiring harness is located behind the rear bumper. You will need to access this area to locate the factory harness connector for the T-connector installation.
The main fuse center is located on the driver's side of the engine compartment at the front of the vehicle. You will need to access this to install the relays and fuses required for the trailer wiring harness.
1. Locate the factory harness connector behind the rear bumper. 2. Remove the protective dust cover from the factory connector and clean away any dirt, dust or debris. 3. Insert the T-connector harness end into the factory harness connector. 4. Firmly press the ends together until the locking tabs engage.
Use cable ties to secure the T-connector wires to the vehicle. This prevents the wires from moving or becoming damaged during vehicle operation.
The three relays are inserted into positions 29, 30, and 31 in the main fuse center. Refer to the label on the inside of the fuse panel cover for exact position locations.
The two 20 amp mini fuses are inserted into positions 46 and 52 in the main fuse center. Refer to the label on the inside of the fuse panel cover for exact position locations.
Before drilling, verify that miscellaneous items (such as wiring, fuel lines, or other components) are not hidden behind or under any surface you plan to drill into. This will avoid damage to the vehicle and prevent personal injury.
Yes, Curt 56073 is designed for Ford Freestar and Mercury Monterey vehicles.
You must purchase three relays and two 20 amp mini fuses separately; these are not included with the product.
No. The T-connector harness inserts directly into the factory harness connector behind the rear bumper. You do not need to remove or cut the factory connector.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 2 items:
$451.75$585.56
No reviews have been added for this product.
