Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2006 - 2011 Buick Lucerne
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2011 | Buick Lucerne | — |
Yes, the 06-11 Buick Lucerne CURT 4-flat Plug and Play Trailer Wiring (Part #CTW202) is designed to fit the 2006-2011 Buick Lucerne.
The 06-11 Buick Lucerne CURT 4-flat Plug and Play Trailer Wiring (Part #CTW202) fits the following vehicles: 2006-2011 Buick Lucerne. Always verify your specific year, make, and model before ordering.
The 06-11 Buick Lucerne CURT 4-flat Plug and Play Trailer Wiring (Part #CTW202) fits 2006-2011 Buick Lucerne models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The 06-11 Buick Lucerne CURT 4-flat Plug and Play Trailer Wiring (Part #CTW202) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56047 custom wiring harness is designed for Buick Lucerne passenger cars. Confirm your vehicle is a Lucerne sedan before purchasing. If you have a different Buick model or body style, contact the vehicle manufacturer or Curt to verify compatibility.
Yes, the Curt 56047 custom wiring harness is designed for Ford Fiesta sedan passenger cars. Confirm your vehicle is a Fiesta sedan before purchasing. If you have a different Ford model or body style, contact the vehicle manufacturer or Curt to verify compatibility.
The kit includes a custom wiring harness with yellow and green wire ends for driver and passenger side connections, a white ground wire with ring terminal, a provided screw for grounding, cable ties for securing loose wires, and a 4-flat dust cover to prevent corrosion.
The manual states "Tools Needed: None" are listed. However, you may need a drill with a 3/32" bit if a suitable existing grounding point (screw with nut) is not available near the taillight connectors. A test light or properly wired trailer is required to test the harness after installation.
Open the vehicle tailgate and remove the scuff panel by pulling out on the bottom and then up, taking care not to damage the alignment tabs on the back. Pull back the felt liner to locate the vehicle taillight wiring harness connectors. The connectors will be similar in appearance to those on the custom wiring harness.
The yellow wire end connects to the driver side taillight connectors. The green wire end connects to the passenger side taillight connectors. Insert each harness end between the separated factory connectors, ensuring the connectors are fully inserted with locking tabs in place.
Locate a suitable grounding point near the taillight connectors, such as an existing screw with nut in the vehicle frame. If no suitable point exists, drill a 3/32" pilot hole. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw.
Drilling is required only if a suitable existing grounding point (screw with nut) is not available near the taillight connectors. If drilling is necessary, use a 3/32" pilot hole. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Drill a 3/32" pilot hole if a suitable existing grounding point is not available. The area must be free of rust, dirt and paint before drilling.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire. Refer to your vehicle owner's manual or contact the vehicle manufacturer for the specific lamp load rating of your vehicle.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly before testing.
When in use, route the 4-flat to the center of the vehicle and out of the trunk. When not in use, roll up and store in a convenient, out of the way location inside the trunk. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation, including the scuff panel and felt liner. Install the provided 4-flat dust cover to help prevent corrosion. Secure any loose wires with the provided cable ties. Test for proper function using a test light or a properly wired trailer.
The Curt 56047 is designed for Buick Lucerne and Ford Fiesta sedan passenger cars. Verify your specific model and body style before purchasing.
No special tools are required. You may need a drill with a 3/32" bit if no existing grounding point is available. A test light or properly wired trailer is needed to test the harness after installation.
Drilling is only required if no suitable existing grounding point is available near the taillight connectors. If needed, drill a 3/32" pilot hole in an area free of rust, dirt and paint.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause overheating and potential fire, and will result in loss of warranty.
Test for proper function using a test light or by connecting a properly wired trailer. All installation steps must be completed before testing.
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$138.83
No reviews have been added for this product.
