Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2010 Jeep Compass
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Complete CURT Class 3 2" trailer hitch and 4-flat custom wiring kit engineered for the 2007 - 2010 Jeep Compass. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Compass and Patriot (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT custom wiring is the easiest way to outfit your vehicle with a trailer wiring connection. Each harness is engineered for a specific make and model and uses an OEM-compatible plug, so no cutting or splicing is required during installation. Provides a 4-way flat connector socket for tail lights, brake lights and turn signals. Includes a dust cover and is backed by a limited one-year warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2010 | Jeep Compass | — |
Yes, the 07 - 10 Jeep Compass Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13548 (Part #CHW-1977) is designed to fit the 2007-2010 Jeep Compass.
The 07 - 10 Jeep Compass Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13548 (Part #CHW-1977) fits the following vehicles: 2007-2010 Jeep Compass. Always verify your specific year, make, and model before ordering.
The 07 - 10 Jeep Compass Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13548 (Part #CHW-1977) fits 2007-2010 Jeep Compass models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The 07 - 10 Jeep Compass Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13548 (Part #CHW-1977) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 13548 is designed for Jeep Compass and Patriot vehicles, including models with the Rallye Package.
The gross load capacity when used as a weight-carrying hitch is 4000 lbs trailer weight and 400 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch includes 4 hex head cap screws (HHCS) 1/2-13 UNC, 4" length, Grade 8; 4 flat washers 1/2"; and 4 serrated flange nuts 1/2-13 UNC, Grade 8. All fasteners are zinc-plated (YZ).
Yes. You must lower the exhaust hangers on both the driver and passenger side and support them while installing the hitch. After the hitch is installed and torqued, the exhaust is re-installed.
Yes. On Rallye Package models, you must cut out a section of the fascia following the cross-hatch pattern shown in the installation diagram. Standard models without the Rallye Package do not require fascia trimming.
1. Lower the exhaust hangers on both driver and passenger sides and support them. 2. Insert the 4" hex bolts with washers into the frame rails from the outside. 3. Raise the hitch into position between the frame rails, tilting the driver side into position first. 4. Push the bolts through the mounting plates and loosely install the 1/2" hex nuts. 5. Torque all 1/2" fasteners to 110 lb-ft. 6. Re-install the exhaust.
Yes. When raising the hitch into position between the frame rails, tilt the driver side of the hitch into position first.
All 1/2" fasteners must be torqued to 110 lb-ft.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants the product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
Yes, the Curt 13548 is designed for Jeep Compass and Patriot vehicles, including Rallye Package models.
The hitch supports 4000 lbs trailer weight and 400 lbs tongue weight, but you must not exceed your vehicle's manufacturer-recommended towing capacity.
Yes. You must lower and support the exhaust hangers during installation. On Rallye Package models, you must also trim the fascia following the cross-hatch pattern shown in the manual.
All 1/2" fasteners must be torqued to 110 lb-ft.
The kit includes 4 x 1/2-13 UNC Grade 8 hex bolts (4" length), 4 x 1/2" flat washers, and 4 x 1/2-13 UNC Grade 8 serrated flange nuts.
Periodically check that all fasteners are tight and all structural components are sound.
Total for 3 items:
$105.00$107.51
On Sale Today
Original price was $455.90. Current price is $323.97.You save $131.93 (29%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.