Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2012 Buick Enclave
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2012 | Buick Enclave | — |
The 08-12 Buick Enclave CURT 4-flat Plug and Play Trailer Wiring (Part #CTW186) fits the following vehicles: 2008-2012 Buick Enclave. Always verify your specific year, make, and model before ordering.
The 08-12 Buick Enclave CURT 4-flat Plug and Play Trailer Wiring (Part #CTW186) fits 2008-2012 Buick Enclave models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 08-12 Buick Enclave CURT 4-flat Plug and Play Trailer Wiring (Part #CTW186) is designed to fit the 2008-2012 Buick Enclave.
The 08-12 Buick Enclave CURT 4-flat Plug and Play Trailer Wiring (Part #CTW186) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56027 fits Chevrolet Malibu models, with the exception of the LTZ trim. If you have a Malibu LTZ, this harness is not compatible.
Yes, the Curt 56027 custom wiring harness is compatible with the Chevrolet Traverse.
Yes, the Curt 56027 custom wiring harness is compatible with the Buick Enclave.
You will need a ratchet, 7mm socket, flat blade screwdriver, and panel trim removal tool.
Yes, you must disconnect the negative battery terminal before beginning installation. This is the first step in the installation process.
Open the vehicle trunk. Remove the fasteners securing the felt trunk liner on the driver side and pull it back. You will see plastic wing nuts securing the taillight assembly. Remove the three plastic wing nuts, then locate and separate the vehicle taillight wiring harness connectors from the taillight housing. Take care not to damage the locking tabs. Repeat this process on the passenger side.
Open the vehicle tailgate. Remove the two bolts securing the taillight assembly on the driver side, then remove the taillight assembly to locate the vehicle taillight wiring harness connectors. Separate the connectors from the taillight housing, taking care not to damage the locking tabs. Repeat this process on the passenger side.
Insert the custom wiring harness end with the yellow wire between the separated vehicle taillight connectors. Make sure the connectors are fully inserted with locking tabs in place.
Route the custom wiring harness end with the green wire down through the opening underneath the taillight assembly. Route the wire along the backside of the bumper and up through the opening on the passenger side. Then repeat the taillight connection process on the passenger side using the harness end with the green wire.
Drilling may be required to establish a ground connection. You should locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing point is available, you may need to drill a 3/32" pilot hole for the provided screw. The area should be free of rust, dirt and paint before securing the white ground wire.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
When not in use, roll up the 4-flat connector and store it in a convenient, out of the way location. When in use, route the 4-flat to the center of the vehicle. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation and reconnect the negative battery terminal. Install the provided 4-flat dust cover to help prevent corrosion. Test for proper function by using a test light or connecting a properly wired trailer.
The white ground wire provides the ground connection for the wiring harness. It should be secured using the ring terminal and provided screw to a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame, or to a 3/32" pilot hole you drill in the frame.
The Curt 56027 fits Buick Enclave, Chevrolet Malibu (excluding LTZ), and Chevrolet Traverse.
You need a ratchet, 7mm socket, flat blade screwdriver, and panel trim removal tool.
Yes, disconnect the negative battery terminal before starting installation.
Drilling may be required if no suitable existing grounding point is available; you may need to drill a 3/32" pilot hole for the ground wire.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower, as this can cause overheating and fire.
Test for proper function by using a test light or connecting a properly wired trailer.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Sep 11 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$134.71
No reviews have been added for this product.
