Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 6.0 Amps |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2015 | Subaru Impreza | Sedan, WRX and WRX STI |
Free Shipping
Ships free on all orders
Authorized DealerYes, the 08-15 Subaru Impreza Sedan, WRX and WRX STI CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2283) is designed to fit the 2008-2015 Subaru Impreza.
The 08-15 Subaru Impreza Sedan, WRX and WRX STI CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2283) fits 2008-2015 Subaru Impreza models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 08-15 Subaru Impreza Sedan, WRX and WRX STI CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2283) fits the following vehicles: 2008-2015 Subaru Impreza. Always verify your specific year, make, and model before ordering.
The 08-15 Subaru Impreza Sedan, WRX and WRX STI CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2283) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part 56061 is designed for the Subaru Impreza. However, the manual does not specify which model years are compatible. Contact Curt or your retailer to confirm fitment for your specific Impreza generation and year.
The Curt 56061 is a trailer wiring converter designed for the Subaru Impreza. It converts the vehicle's factory wiring harness to a standard 4-Flat trailer connector, allowing you to connect a trailer to your vehicle.
The kit includes a T-connector with yellow and green wires, a white grounding wire with eyelet and screw, a black converter box, double-sided tape, cable ties, and a 4-Flat connector. You will need basic hand tools, a drill with a 3/32" bit (if drilling a grounding hole), and a screwdriver. A CME-PCL-INS sheet is referenced for battery power wire routing.
The manual does not specify whether the battery must be disconnected. However, because the installation involves working with the vehicle's wiring harness and routing power from the battery, it is strongly recommended to disconnect the negative battery terminal before beginning work. Consult the CME-PCL-INS sheet or contact Curt for specific guidance.
You must remove the trunk threshold and pull back the interior side felt liner on the driver side to access the vehicle wiring harness. You will also need to remove a few plastic fasteners to expose the harness. The manual notes that other items may need to be removed depending on your vehicle's configuration.
Separate the vehicle wiring harness on the driver side and clean it of any dirt or debris. Insert the T-connector end with the yellow wire between the vehicle harness halves. Fully insert the housings, being careful not to break the locking tabs. Repeat this process on the passenger side with the T-connector end that has the green wire, routing it along the threshold.
Locate a suitable grounding point near the T-connector, such as an existing screw with nut in the vehicle's frame. If no suitable point exists, drill a 3/32" hole and secure the white wire using the eyelet and screw provided in the kit. Before drilling, verify that no miscellaneous items are hidden behind or under the surface to avoid vehicle damage or personal injury.
Adhere the black converter box to the frame of the car using the double-sided tape provided in the kit. Secure any loose parts of the T-connector with the cable ties provided.
Route the black power wire from the battery to the black converter box as shown on the CME-PCL-INS sheet included with the kit. Route the black wire through any rubber grommet in the trunk area if applicable. The manual does not provide detailed routing instructions; refer to the CME-PCL-INS sheet for your specific vehicle.
Store the 4-Flat connector in the rear cargo area when not in use.
After all wiring connections are complete, reinstall the trunk threshold, side felt liner, and any other items that were removed during installation.
Drilling is not always required. You only need to drill a 3/32" hole if a suitable existing grounding point (such as a screw with nut in the vehicle's frame) is not available near the T-connector. Before drilling, verify that no miscellaneous items are hidden behind or under the surface to avoid vehicle damage or personal injury.
If you need to drill a grounding hole, drill a 3/32" hole to secure the white grounding wire using the eyelet and screw provided.
Before drilling, verify that miscellaneous items are not hidden behind or under any surface to avoid vehicle damage and personal injury. When working with the T-connector, do not break the locking tabs, as this will compromise the connection. Take care when handling the wiring harness to avoid damaging factory components.
The Curt 56061 is designed for the Subaru Impreza, but the manual does not specify model years. Confirm fitment with Curt or your retailer for your specific year.
You need basic hand tools, a screwdriver, and optionally a drill with a 3/32" bit if you need to create a grounding hole. All wiring connectors and fasteners are included.
Yes, you must remove the trunk threshold and pull back the interior side felt liner to access the vehicle wiring harness. A few plastic fasteners will also need to be removed.
The black converter box is adhered to the vehicle frame using the double-sided tape provided in the kit.
Before drilling, verify that no miscellaneous items are hidden behind or under the surface to avoid vehicle damage and personal injury.
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$177.71
No reviews have been added for this product.