Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2009 Dodge Journey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 | Dodge Journey | — |
The 09-09 Dodge Journey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW706) fits the following vehicles: 2009 Dodge Journey. Always verify your specific year, make, and model before ordering.
Yes, the 09-09 Dodge Journey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW706) is designed to fit the 2009 Dodge Journey.
The 09-09 Dodge Journey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW706) fits 2009 Dodge Journey models. The 2009 model year is the last year covered by this part number. For newer models, check for an updated version.
The 09-09 Dodge Journey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW706) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56037 is designed for Dodge Journey SUVs, Mini & Full-Sized Vans. The harness connects to the factory taillight wiring connectors behind the driver and passenger side taillights.
The Curt 56037 is a custom wiring harness that provides trailer lighting connections for your Dodge Journey. It integrates with the vehicle's factory taillight wiring to supply power for trailer signal, tail, and running lights.
The signal circuits are rated for 3.0 amps per side.
The tail and running circuits are rated for 6.0 amps total.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed this rating, as exceeding the product rating can cause loss of warranty, overheating, and potential fire.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. The signal circuits are rated for 3.0 amps per side and the tail/running circuits for 6.0 amps total. Exceeding these ratings can cause loss of warranty, overheating, and potential fire. Check your vehicle owner's manual or contact the vehicle manufacturer for your specific lamp load rating.
You will need a Phillips screwdriver, flat blade screwdriver, and panel trim removal tool.
Drilling may be required. During installation, you will locate a suitable grounding point near the taillight connector. If an existing screw with nut is not available in the vehicle frame, you will need to drill a 3/32" pilot hole for the provided ground screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
The manual does not specify whether the battery must be disconnected before installation. Consult your vehicle owner's manual or contact Curt Manufacturing for guidance on safe battery disconnection procedures.
Open the vehicle tailgate and remove the two plastic clips securing each taillight in place. Pull out on the taillight assembly, taking care not to damage the alignment tabs on the back. You will then see the vehicle taillight wiring harness connectors behind the taillight housing.
The yellow wire is part of the custom wiring harness end that connects to the driver side taillight. It is inserted between the separated vehicle taillight connectors to integrate the custom harness with the factory wiring.
The green wire is part of the custom wiring harness end that connects to the passenger side taillight. It is routed behind the removed scuff panels and inserted between the separated passenger side taillight connectors.
The white wire is the ground wire. It is secured to a suitable grounding point near the connector using the provided ring terminal and screw. The grounding area should be free of rust, dirt, and paint.
The black power wire connects to the vehicle battery. Routing instructions for the battery connection are provided on the included CME-PCL-INS sheet, which is referenced in the installation manual but not reproduced here.
The black converter box should be adhered to a flat spot inside the vehicle near the taillight using the provided double-sided tape.
When not in use, roll up the 4-flat connector and store it in a convenient, out-of-the-way location inside the trunk. When in use, route it to the center of the vehicle and out of the trunk. Secure any loose wires with the provided cable ties.
Once installed, test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
Yes, a 4-flat dust cover is provided. Install it after completing the installation to help prevent corrosion.
Yes, cable ties are provided. Use them to secure any loose wires during installation.
Yes, double-sided tape is provided. Use it to adhere the black converter box to a flat spot inside the vehicle near the taillight.
Yes, a ground screw is provided. It is used with the white ground wire and ring terminal to secure the ground connection to a suitable grounding point near the taillight connector.
Yes, a ring terminal is provided. It is used with the white ground wire and the provided screw to secure the ground connection.
Yes, the Curt 56037 is designed for Dodge Journey SUVs, Mini & Full-Sized Vans.
A 10-amp maximum fuse is required for the battery connection. Do not exceed this rating.
You will need a Phillips screwdriver, flat blade screwdriver, and panel trim removal tool.
Signal circuits are rated for 3.0 amps per side; tail/running circuits for 6.0 amps total. Do not exceed the product rating or your vehicle's lamp load rating, whichever is lower.
Total for 4 items:
$211.71$226.85
On Sale Today
Original price was $150.90. Current price is $135.76.You save $15.14 (10%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
