
Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.






Always the correct part
We know our products
Quality Products
Free Shipping!






Always the correct part
We know our products
Quality Products
Free Shipping!
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2014 | Subaru Legacy | Sedan |
The 10-14 Subaru Legacy Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2296) fits 2010-2014 Subaru Legacy models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 10-14 Subaru Legacy Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2296) is designed to fit the 2010-2014 Subaru Legacy.
The 10-14 Subaru Legacy Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2296) fits the following vehicles: 2010-2014 Subaru Legacy. Always verify your specific year, make, and model before ordering.
The 10-14 Subaru Legacy Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2296) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part 56091 is designed for the Subaru Legacy. The manual does not specify model years or generations, so contact Curt or your retailer to confirm your specific Legacy model year is supported.
The kit includes a T-connector harness with yellow and green wire ends, a black converter box, double-sided tape, cable ties, an eyelet, a screw, and a 4-flat wire connector. The yellow wire end connects to the driver's side taillight, the green wire end to the passenger side, and the 4-flat wire routes to the center of the vehicle for trailer connection.
Open the trunk and remove the spare tire compartment cover, jack storage tray, and rear scuff panel (by removing plastic fasteners and pulling up). On both sides, remove the cargo loops holding the felt trunk liner in place, then pull back the trunk liner to access the vehicle's taillight wiring harness.
On the driver's side, carefully separate the vehicle's taillight connectors without damaging the locking tabs. Insert the T-connector end with the yellow wire between the separated connectors, then fully insert both connectors and lock the tabs in place. Repeat this process on the passenger side using the green wire end of the T-connector.
Drilling is optional. Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. If no existing point is available, drill a 3/32" hole and secure the white wire using the eyelet and screw provided. Before drilling, verify that no miscellaneous items are hidden behind or under the surface to avoid damage and personal injury.
Adhere the black converter box to the frame of the car using the double-sided tape provided in the kit.
Route the 4-flat wire to the center of the vehicle and out the trunk when in use. When not in use, roll it up and store it in an out-of-the-way location in the trunk.
The white wire is the ground wire. It must be secured to a suitable grounding point near the connector, either to an existing screw with nut in the vehicle's frame or to a newly drilled 3/32" hole using the eyelet and screw provided.
Basic tools include a screwdriver (for removing plastic fasteners and securing the ground wire screw). If you choose to drill a ground hole, you will need a drill with a 3/32" bit. The manual does not specify additional tools required.
Secure any loose parts of the T-connector with the cable ties provided in the kit.
Before drilling, verify that miscellaneous items are not hidden behind or under any surface. Drilling into hidden wiring, fuel lines, or other components can cause damage and personal injury.
Reinstall everything you removed during installation, including the rear scuff panel, cargo loops, felt trunk liner, jack storage tray, and spare tire compartment cover.
Yes, the Curt 56091 is designed for the Subaru Legacy. Confirm your specific model year with the retailer or manufacturer.
No. Drilling is optional—only if no existing grounding point (screw with nut) is available in the vehicle's frame. If you drill, use a 3/32" bit and verify no hidden items are behind the surface first.
The manual does not specify installation time. Contact the manufacturer or retailer for an estimate.
Verify that no miscellaneous items (wiring, fuel lines, etc.) are hidden behind or under the surface where you plan to drill.

Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.