Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2017 Honda Odyssey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2017 | Honda Odyssey | — |
The 11-17 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1371) fits the following vehicles: 2011-2017 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The 11-17 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1371) fits 2011-2017 Honda Odyssey models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 11-17 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1371) is designed to fit the 2011-2017 Honda Odyssey.
The 11-17 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1371) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56378 is designed for Honda Odyssey vehicles in the SUVs, Mini & Full-Sized Vans category. The connector installs behind the driver side rear access panel. Verify your vehicle matches the application before purchasing.
The connector is rated for Signal Circuits at 3.0 amps per side and Tail/Running Circuits at 6.0 amps total. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating and potential fire.
You will need a flat blade screwdriver and a panel trim removal tool. The manual also references drilling a 3/32" pilot hole for the ground screw if a suitable existing screw is not available, which would require a 3/32" drill bit.
The kit includes a 10-amp fuse for the in-line fuse holder, a 10-amp mini fuse for position #8 in the rear fuse panel, two 7.5-amp fuses for positions #2 and #11, a ground screw with ring terminal, double-sided tape for mounting the converter box, cable ties for securing loose wires, and a 4-flat dust cover.
The custom wiring connector plugs into the vehicle connector located at the rear fuse panel behind the driver side rear access panel. Route the connector behind the interior panel from the rear of the vehicle to the fuse panel, then insert it fully into the vehicle connector, ensuring the locking tabs are in place.
Mount the black converter box on a flat spot inside the vehicle near the taillight using the provided double-sided tape. The box should be positioned conveniently for access to the in-line fuse holder where you will insert the 10-amp fuse.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable point exists, drill a 3/32" pilot hole. Clean the area of rust, dirt and paint, then secure the white ground wire using the ring terminal and provided screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Drilling is required only if a suitable existing grounding point (such as an existing screw with nut in the vehicle frame) is not available. If drilling is necessary, you will drill a 3/32" pilot hole for the provided ground screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Drill a 3/32" pilot hole for the provided ground screw. The grounding point should be free of rust, dirt and paint. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Install a 10-amp mini fuse in position #8, and two 7.5-amp fuses in positions #2 and #11 in the rear fuse panel. Additionally, insert a 10-amp fuse into the in-line fuse holder on the converter box. The battery connection must be fuse-protected with a 10-amp maximum fuse.
When in use, route the 4-flat to the center of the vehicle and out of the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties. Install the provided 4-flat dust cover to help prevent corrosion.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector functions properly before testing.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 6.0 amps total) or your tow vehicle's lamp load rating, whichever is lower. The battery connection must be fuse-protected with a 10-amp maximum fuse.
Before drilling to create a grounding point, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
Yes, the Curt 56378 is designed for Honda Odyssey vehicles. The connector installs behind the driver side rear access panel.
You need a flat blade screwdriver, panel trim removal tool, and a 3/32" drill bit (if drilling a ground hole). All other hardware is included.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed this rating or your vehicle's lamp load rating, whichever is lower.
Install a 10-amp fuse in the in-line fuse holder, a 10-amp mini fuse in position #8, and two 7.5-amp fuses in positions #2 and #11 of the rear fuse panel.
Total for 4 items:
$160.71$163.85
On Sale Today
Original price was $87.90. Current price is $84.76.You save $3.14
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
