Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2018 - 2023 Honda Odyssey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2023 | Honda Odyssey | — |
The 18-23 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1370) fits the following vehicles: 2018-2023 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The 18-23 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1370) fits 2018-2023 Honda Odyssey models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 18-23 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1370) is designed to fit the 2018-2023 Honda Odyssey.
The 18-23 HONDA Odyssey CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1370) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56382 is designed for Honda Odyssey vans in the SUVs, Mini & Full-Sized Vans category. Your vehicle must have a factory trailer tow plug located behind the driver side rear fuse panel cover to use this connector.
The Curt 56382 is a custom wiring connector that interfaces with your vehicle's factory trailer tow plug. It includes a converter box, 4-flat connector, fuses, and grounding hardware. The connector allows you to connect a trailer with proper signal and running light circuits.
You will need a flat blade screwdriver, a panel trim removal tool, and a cutting tool. The manual also recommends having a test light or properly wired trailer available to test the connector after installation.
The kit includes a black converter box, a 4-flat connector with dust cover, double-sided tape, a 10-amp fuse for the in-line fuse holder, a 30-amp cartridge fuse, two 7.5-amp mini blade fuses, a white ground wire with ring terminal, a mounting screw for grounding, and cable ties for securing loose wires.
The manual does not specify whether the battery must be disconnected. Contact Curt Manufacturing or your vehicle manufacturer for guidance on this safety step before beginning installation.
The factory trailer tow plug is located behind the driver side rear fuse panel cover, near the rear seat. The manual refers to this location as position S3. You will remove the fuse panel cover to access it.
Insert the custom wiring harness connector into the vehicle factory tow plug connector. Make sure the connectors are fully inserted with locking tabs in place. The connectors should fit together similar to how the factory tow plug is designed.
Mount the black converter box to the metal mounting bracket located to the left of the fuse box using the provided double-sided tape. Choose a flat spot inside the vehicle near the fuse panel. The converter box should be positioned so the in-line fuse holder is accessible.
Insert the provided 10-amp fuse into the in-line fuse holder on the converter box. Then, in the rear fuse panel, install the provided 30-amp cartridge fuse in position #12 and two 7.5-amp mini blade fuses in positions #10 and #11.
You may need to drill a grounding point if a suitable existing screw with nut is not available in the vehicle frame near the connector. If drilling is required, use a 3/32" pilot hole. The area must be free of rust, dirt and paint before securing the white ground wire. Always check for hidden items behind or under surfaces before drilling to avoid damage and personal injury.
Signal Circuits are rated at 3.0 amps per side. Tail/Running Circuits are rated at 6.0 amps total. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating and potential fire.
Route the 4-flat behind the side trim panel and out from underneath the vehicle. When in use, route the 4-flat to the center of the vehicle and out the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector will function properly before testing.
Install the provided 4-flat dust cover to help prevent corrosion when the connector is not in use.
You must remove the rear scuff panel (secured by two cargo hooks), the driver side trim panel (secured by one cargo hook), and the fuse panel cover near the rear seat on the driver side. Take care not to damage the alignment tabs when removing these panels.
Yes, the Curt 56382 is designed for Honda Odyssey vans. Your vehicle must have a factory trailer tow plug behind the driver side rear fuse panel.
Drilling may be required only if a suitable existing screw with nut is not available for the ground wire. If drilling is needed, use a 3/32" pilot hole. Always check for hidden items before drilling.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed this rating or the tow vehicle lamp load rating, whichever is lower, as it can cause overheating and potential fire.
Install a 30-amp cartridge fuse in position #12 and two 7.5-amp mini blade fuses in positions #10 and #11 in the rear fuse panel. A 10-amp fuse goes in the in-line fuse holder on the converter box.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$153.71
No reviews have been added for this product.
