95-12 Hyundai Accent Hatchback CURT 4-flat Plug and Play Trailer WiringCURT$66.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
Free Shipping
Ships free on all orders
Authorized Dealer| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 5.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2017 | Hyundai Accent | Hatchback |
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Sep 11 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
The 13-17 Hyundai Accent Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1396) fits 2013-2017 Hyundai Accent models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The 13-17 Hyundai Accent Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1396) fits the following vehicles: 2013-2017 Hyundai Accent. Always verify your specific year, make, and model before ordering.
Yes, the 13-17 Hyundai Accent Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1396) is designed to fit the 2013-2017 Hyundai Accent.
The 13-17 Hyundai Accent Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1396) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56254 Custom Wiring Harness is designed for the Hyundai Accent hatchback. The harness connects to the vehicle's taillight wiring connectors located behind the driver and passenger side taillight housings inside the trunk.
The Curt 56254 has two circuit ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 5.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower, as exceeding the product rating can cause loss of warranty, overheating and potential fire.
You will need a panel trim removal tool and a Phillips screwdriver. The harness comes with a provided screw for grounding, double-sided tape for the converter box, cable ties, and a 4-flat dust cover.
Yes. The first step of installation is to locate the vehicle battery on the driver side under the hood and disconnect the negative battery terminal. The battery must remain disconnected throughout the installation process and is reconnected only in the final step.
The custom wiring harness has two ends: the end with the yellow wire connects to the driver side taillight connectors, and the end with the green wire connects to the passenger side taillight connectors. Both ends insert between the separated taillight housing connectors inside the trunk.
1. Remove the side trim panels to access the taillight connectors. 2. Locate the vehicle taillight wiring harness connectors behind the taillight housing. 3. Separate the connectors from the taillight housing, taking care not to damage the locking tabs. 4. Insert the custom wiring harness end (yellow for driver side, green for passenger side) between the separated connectors. 5. Ensure the connectors are fully inserted with locking tabs in place. Repeat this process for both sides of the vehicle.
Drilling may be required for the ground wire installation. You must locate a suitable grounding point near the taillight connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, you will need to drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint before securing the white ground wire using the ring terminal and provided screw.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. The area where you drill the ground wire pilot hole should be free of rust, dirt and paint.
The black converter box should be adhered to a flat spot inside the vehicle near the taillight using the provided double-sided tape. When not in use, the 4-flat connector should be rolled up and stored in a convenient, out-of-the-way location inside the trunk.
When in use, route the 4-flat connector to the center of the vehicle and out of the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
All steps must be followed to ensure the wiring harness functions properly. Once installed, test for proper function by using a test light or connecting a properly wired trailer. Reconnect the negative battery terminal and reinstall all items removed during installation before testing.
Reinstall all items removed during installation, reconnect the negative battery terminal, and install the provided 4-flat dust cover to prevent corrosion.
The Curt 56254 Custom Wiring Harness is designed for the Hyundai Accent hatchback.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 5.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower.
Panel trim removal tool and Phillips screwdriver. The harness includes a ground screw, double-sided tape, cable ties, and a 4-flat dust cover.
Yes. Disconnect the negative battery terminal before beginning installation and reconnect it only after all other steps are complete.
Drilling may be required for the ground wire. If no existing screw is available in the vehicle frame near the connector, drill a 3/32" pilot hole for the provided ground screw.
Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 5.0 amps total) or the tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Total for 4 items:
$166.71
No reviews have been added for this product.
