17-17 HONDA Accord Sedan CURT 4-flat Plug and Play Trailer WiringCURTOriginal price was $98.90. Current price is $91.76.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2017 | Honda Accord | Sedan |
The 16-17 HONDA Accord Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1324) fits the following vehicles: 2016-2017 Honda Accord. Always verify your specific year, make, and model before ordering.
Yes, the 16-17 HONDA Accord Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1324) is designed to fit the 2016-2017 Honda Accord.
The 16-17 HONDA Accord Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1324) fits 2016-2017 Honda Accord models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The 16-17 HONDA Accord Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1324) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 56299 is designed for Honda Accord sedans sold in the US only. If you own a different model year, body style (coupe, wagon, hatchback) or non-US market vehicle, confirm compatibility with the vehicle manufacturer or Curt before purchasing.
The harness is rated for 3.0 amps per side on signal circuits and 6.0 amps total on tail/running circuits. Do not exceed these ratings or your vehicle's lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating and potential fire.
You will need: panel trim removal tool, flat blade screwdriver, wire stripper, crimping tool, and cutting tool. You may also need a drill with a 3/32" bit if a suitable grounding point with an existing screw is not available near the taillight connector.
Yes. You must disconnect the negative battery terminal before beginning installation. Reconnect it only after all installation steps are complete and all items removed during installation have been reinstalled.
The taillight wiring connectors are located behind the felt liner inside the trunk. On the driver side, they are behind the driver side taillight housing (P3). On the passenger side, they are behind the passenger side taillight housing (P4). You will need to remove the trunk floor coverings, rear scuff panel, and felt liner fasteners to access them.
Insert the custom wiring harness end with the yellow wire between the separated driver-side taillight connectors, ensuring the connectors are fully inserted with locking tabs in place. Repeat on the passenger side using the harness end with the green wire. Take care not to damage the locking tabs during insertion.
Drilling is required only if a suitable grounding point with an existing screw and nut is not available near the taillight connector. If drilling is necessary, you will need to drill a 3/32" pilot hole in an area free of rust, dirt and paint. Before drilling, check for miscellaneous items hidden behind or under surfaces to avoid damage and personal injury.
Drill a 3/32" pilot hole if a suitable existing screw is not available. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and the provided screw.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Exceeding this rating can cause loss of warranty, overheating and potential fire.
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape.
When in use, route the 4-flat to the center of the vehicle. When not in use, roll it up and store in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness functions properly.
Do not exceed the product rating (3.0 amps per side on signal circuits, 6.0 amps total on tail/running circuits) or your tow vehicle's lamp load rating, whichever is lower. Exceeding either rating can cause loss of warranty, overheating and potential fire. Check your vehicle owner's manual or contact the vehicle manufacturer for your specific lamp load rating.
Install the provided 4-flat dust cover to help prevent corrosion.
Yes, for Honda Accord sedans sold in the US only. Confirm your model year and body style match before purchasing.
Panel trim removal tool, flat blade screwdriver, wire stripper, crimping tool, cutting tool, and optionally a drill with 3/32" bit for grounding.
Yes, disconnect the negative battery terminal before starting and reconnect only after all installation is complete.
10-amp maximum fuse on the battery connection. Do not exceed this rating as it can cause overheating and fire.
Signal circuits: 3.0 amps per side. Tail/running circuits: 6.0 amps total. Do not exceed these or your vehicle's lamp load rating.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Sep 22 - Fri, Sep 25
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$166.71
No reviews have been added for this product.
