20-22 Nissan Rogue Sport CURT 4-flat Plug and Play Trailer WiringCURTOriginal price was $113.90. Current price is $111.76.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2019 Nissan Rogue Sport
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Tail Light Circuits | 3.0 Amps |
| Turn and Brake Circuits | 6.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2019 | Nissan Rogue Sport | — |
Yes, the 17-19 Nissan Rogue Sport CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2070) is designed to fit the 2017-2019 Nissan Rogue Sport.
The 17-19 Nissan Rogue Sport CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2070) fits 2017-2019 Nissan Rogue Sport models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The 17-19 Nissan Rogue Sport CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2070) fits the following vehicles: 2017-2019 Nissan Rogue Sport. Always verify your specific year, make, and model before ordering.
The 17-19 Nissan Rogue Sport CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2070) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the 56397 Custom Wiring Harness is designed for the Nissan Rogue Sport. It is classified as an SUV wiring harness in the S (SUVs, Mini & Full-Sized Vans) category.
The 56397 is a Custom Wiring Harness made by Curt Manufacturing. It provides electrical connections for trailer lighting on compatible vehicles. The harness includes signal circuits (3.0 amps per side) and tail/running circuits (6.0 amps total), and connects to the vehicle's taillight wiring to power a trailer's 4-flat connector.
You will need: ratchet, 10mm socket, socket extension, flat blade screwdriver, panel trim removal tool, wire stripper, wire crimper, cutting tool, and fish wire.
The harness includes: custom wiring harness ends with yellow and green wires, white ground wire with ring terminal, black converter box with double-sided tape for mounting, provided screw for grounding, cable ties for securing loose wires, and a 4-flat dust cover.
The manual does not explicitly state whether the battery must be disconnected before installation. However, it does require that the battery connection be fuse-protected with a 10-amp max fuse during the installation process. Consult your vehicle owner's manual or the manufacturer for battery disconnection requirements.
The manual provides step-by-step installation instructions for a single installer using basic hand tools. No mention is made of requiring professional installation or additional people. However, you should be comfortable working with vehicle trim panels, electrical connectors, and basic wiring.
Open the vehicle trunk. On the driver side, locate and remove the two fasteners securing the taillight in place. Gently pull the taillight rearward, taking care not to damage the alignment tabs on the back. The vehicle taillight wiring harness connectors will be visible on the back of the taillight housing. Separate these connectors from the taillight, taking care not to damage the locking tabs.
Route the custom wiring harness end with the yellow wire along the rear bumper and up behind the fender to the opening underneath the removed driver-side taillight. Route the custom wiring harness end with the green wire to the passenger side along the rear bumper, following the same path to the passenger-side taillight opening.
Insert the custom wiring harness end (with yellow wire for driver side, green wire for passenger side) between the separated vehicle taillight connectors. Make sure the connectors are fully inserted with locking tabs in place. Then reinstall the taillight by pushing it back into position and securing the two fasteners.
You should first locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing point is available, you may drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint. Always check for miscellaneous items hidden behind or under surfaces before drilling to avoid damage and personal injury.
Drill a 3/32" pilot hole for the provided ground screw. The area should be free of rust, dirt and paint. Always check for miscellaneous items hidden behind or under surfaces before drilling.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame, or drill a 3/32" pilot hole for the provided screw. Secure the white ground wire using the ring terminal and provided screw. The area must be free of rust, dirt and paint.
Mount the black converter box on a flat clean surface that is out of the path of spray and debris from the rear wheels and road. Use the provided double-sided tape to adhere it. Failure to mount the box in a protected area can cause loss of warranty, product failure, overheating and potential fire.
When in use, route the 4-flat to the center of the vehicle. When not in use, roll it up and store in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties.
The battery connection must be fuse-protected with a 10-amp max fuse. Exceeding this rating can cause loss of warranty, overheating and potential fire.
Signal Circuits are rated at 3.0 amps per side. Tail/Running Circuits are rated at 6.0 amps total. Do not exceed these product ratings or the tow vehicle lamp load rating, whichever is lower.
All steps must be followed to ensure the wiring harness functions properly. Once installed, test for proper function by using a test light or connecting a properly wired trailer.
Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 6.0 amps total) or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
After installation, reinstall all items removed during installation and install the provided 4-flat dust cover to help prevent corrosion. Test for proper function by using a test light or connecting a properly wired trailer.
From underneath the vehicle, locate and remove the push fasteners from the trim panel to access the area underneath the removed taillight. This allows you to route the custom wiring harness end with the yellow wire along the rear bumper and up behind the fender.
Yes, the Curt 56397 Custom Wiring Harness is designed for the Nissan Rogue Sport.
You will need a ratchet, 10mm socket, socket extension, flat blade screwdriver, panel trim removal tool, wire stripper, wire crimper, cutting tool, and fish wire.
Only if no existing grounding point is available. You may need to drill a 3/32" pilot hole for the ground screw, but you should first check for an existing screw with nut in the vehicle frame.
The battery connection must be fuse-protected with a 10-amp max fuse. Do not exceed this rating.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 6.0 amps total. Do not exceed these ratings or the vehicle's lamp load rating, whichever is lower.
Test for proper function by using a test light or connecting a properly wired trailer.
Total for 4 items:
$193.12$199.85
On Sale Today
Original price was $123.90. Current price is $117.17.You save $6.73 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.