07-11 HONDA CR-V Excluding hybrid with kick sensor CURT 4-flat Plug and Play Trailer WiringCURTIn Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Ships free on all orders
Authorized Dealer| Battery-Powered | Yes |
| Color | Black |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2025 | Honda CR-V | Excluding hybrid and Touring with kick sensor |
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Yes, the 17-25 HONDA CR-V Excluding hybrid and Touring with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1349) is designed to fit the 2017-2025 Honda CR-V.
The 17-25 HONDA CR-V Excluding hybrid and Touring with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1349) fits 2017-2025 Honda CR-V models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 17-25 HONDA CR-V Excluding hybrid and Touring with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1349) fits the following vehicles: 2017-2025 Honda CR-V. Always verify your specific year, make, and model before ordering.
The 17-25 HONDA CR-V Excluding hybrid and Touring with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1349) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56370 Custom Wiring Connector is designed for Honda CR-V vehicles. The manual lists CR-V as an application under the SUVs, Mini & Full-Sized Vans category. For specific model year compatibility, contact the vehicle manufacturer or Curt directly.
The Curt 56370 is a Custom Wiring Connector that integrates with your vehicle's taillight wiring system. It includes a converter box and a 4-flat connector for towing applications. The connector handles signal circuits (3.0 amps per side) and tail/running circuits (6.0 amps total).
You will need: a flat blade screwdriver, a panel trim removal tool, and a Phillips screwdriver. These are the only tools listed as required for installation.
The kit includes the custom wiring connector with converter box, a 10-amp fuse for the in-line fuse holder, double-sided tape for mounting the converter box, cable ties for securing loose wires, and a 4-flat dust cover to prevent corrosion.
The manual does not specify whether the battery must be disconnected. Contact Curt Manufacturing or your vehicle manufacturer for guidance on this safety requirement before beginning installation.
The custom wiring connector is located behind the driver side rear access panel (marked as S3 in the manual). The vehicle's taillight wiring connector is located behind the upper side-trim panel near the taillight.
Open the vehicle tailgate and remove all trunk floor coverings. This provides access to the interior panels and wiring needed for installation.
Remove the fasteners securing the rear scuff panel. Pull out on the bottom of the panel and then pull up to remove it. Take care not to damage the alignment tabs on the back of the panel.
Yes. Fold both rear seats down to access the cargo tie downs and the rear seat floor panel. You will also need to remove the two cargo tie downs and the screw located under the cargo tie down cover.
You must remove: the storage trim panel behind the rear seats, the center ceiling trim panel, the push fasteners securing the side trim panel, the small cover behind the rear seat fold down lever, and the two screws securing the side trim panel. The vehicle trailer connector is located inside the interior side panels.
Locate the vehicle's taillight wiring connector behind the upper side-trim panel. Insert the custom wiring connector into the vehicle connector, ensuring the connectors are fully inserted with locking tabs in place.
Mount the black converter box on a flat spot inside the vehicle near the taillight using the provided double-sided tape. Ensure the surface is clean and dry before adhering the box.
Insert a 10-amp fuse into the in-line fuse holder. The battery connection must be fuse-protected with a 10-amp maximum. Do not exceed this rating, as exceeding the product rating can cause loss of warranty, overheating and potential fire.
When in use, route the 4-flat connector to the center of the vehicle and out of the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation. Install the provided 4-flat dust cover to help prevent corrosion. Test the connector for proper function using a test light or by connecting a properly wired trailer.
Signal circuits are rated at 3.0 amps per side. Tail and running circuits are rated at 6.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower.
Test the connector for proper function using a test light or by connecting a properly wired trailer. All steps must be followed to ensure the wiring connector will function properly.
Yes, the Curt 56370 is designed for Honda CR-V vehicles. For specific model year compatibility, contact Curt or your vehicle manufacturer.
You need a flat blade screwdriver, panel trim removal tool, and Phillips screwdriver.
Use a 10-amp fuse in the in-line fuse holder. Do not exceed 10 amps, as this can cause overheating and fire.
The manual does not mention drilling. Installation involves removing trim panels and connecting to the existing vehicle taillight wiring connector.
Signal circuits: 3.0 amps per side. Tail/running circuits: 6.0 amps total. Do not exceed these ratings or the vehicle lamp load rating, whichever is lower.
Total for 4 items:
$147.71
No reviews have been added for this product.
