17-25 HONDA CR-V Excluding hybrid and Touring with kick sensor CURT 4-flat Plug and Play Trailer WiringCURT$71.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Yes, the 07-11 HONDA CR-V Excluding hybrid with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1351) is designed to fit the 2007-2011 Honda CR-V.
The 07-11 HONDA CR-V Excluding hybrid with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1351) fits the following vehicles: 2007-2011 Honda CR-V. Always verify your specific year, make, and model before ordering.
The 07-11 HONDA CR-V Excluding hybrid with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1351) fits 2007-2011 Honda CR-V models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The 07-11 HONDA CR-V Excluding hybrid with kick sensor CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1351) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55106 is designed for Honda CR-V vehicles. It is classified for SUVs, Mini & Full-Sized Vans (category S). However, check your vehicle owner's manual or contact the vehicle manufacturer for confirmation of compatibility with your specific model year and trim level, as the installation manual does not specify which CR-V generations or years are supported.
The Curt 55106 custom wiring connector is designed for Honda CR-V vehicles in the SUVs, Mini & Full-Sized Vans category. Verify compatibility with your specific model year by checking your vehicle owner's manual or contacting the vehicle manufacturer.
The Curt 55106 includes a custom wiring harness with a connector, a black converter box, double-sided tape for mounting the converter box, cable ties for securing loose wires, and a 4-flat dust cover to help prevent corrosion.
You will need a ratchet, 10mm socket, panel trim removal tool, and clip removal tool. A test light or properly wired trailer is also needed to test the connector after installation.
A panel trim removal tool may be required when carefully pulling back the driver side interior trim panel to locate the vehicle taillight wiring harness connectors. The manual lists it as a required tool, though it notes that a clip removal tool may be needed as an alternative for some clips.
Yes. Step 1 of the installation requires you to locate the vehicle battery on the driver side under the hood and disconnect the negative battery terminal before proceeding with any other steps.
Yes, you must disconnect the negative battery terminal before beginning installation. Reconnect it only after all other steps are complete and items have been reinstalled.
The wiring location for the Curt 55106 on a Honda CR-V is designated as S3, which is located behind the driver side rear access panel. The vehicle taillight wiring harness connectors are accessed by pulling back the driver side interior trim panel after removing the D-rings and rear scuff panel.
You must remove the storage area cover, rubber mat, spare tire cover, D-rings on both driver and passenger sides, and the rear scuff panel. Then carefully pull back the driver side interior trim panel to locate the vehicle taillight wiring harness connectors.
Insert the custom wiring harness end into the vehicle harness connector. Make sure the connectors are fully inserted with locking tabs in place. Then route the remaining part of the custom connector behind the trim panel toward the rear of the vehicle.
Locate a flat spot inside the vehicle, near the taillight, and adhere the black converter box using the provided double-sided tape. The manual does not specify the exact location beyond 'near the taillight' and 'a flat spot inside the vehicle.'
When not in use, roll up the 4-flat connector and store it in a convenient, out of the way location. When in use, route the 4-flat to the center of the vehicle. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation, reconnect the negative battery terminal, and install the provided 4-flat dust cover to help prevent corrosion. Then test the connector for proper function using a test light or by connecting a properly wired trailer.
Test the connector for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector functions properly.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire. The specific product rating (amperage or wattage) is not stated in the manual; check your vehicle owner's manual or contact the vehicle manufacturer for this information.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. The specific product rating is not provided in the manual; contact Curt Manufacturing or your vehicle manufacturer for this specification.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. You must not exceed the product rating or the tow vehicle lamp load rating, whichever is lower.
First, verify that all installation steps were followed correctly. Ensure the custom wiring harness connectors are fully inserted with locking tabs in place. Check that the converter box is properly adhered and all loose wires are secured with cable ties. Confirm the negative battery terminal was reconnected. If the connector still does not function, test it using a test light or properly wired trailer to identify the specific issue.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2011 | Honda CR-V | Excluding hybrid with kick sensor |
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$139.71
No reviews have been added for this product.
