Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2009 Lincoln MKZ
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2007-2009 Lincoln MKZ All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6 and Mercury Milan (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2007, 2008, 2009 Lincoln MKZ All Class 1 Hitch, 1-1/4" Receiver, Select Fusion, MKZ, Zephyr, Mazda 6, Milan
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2009 | Lincoln MKZ | — |
Yes, the 2007-2009 Lincoln MKZ All Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11329-002) is designed to fit the 2007-2009 Lincoln MKZ.
The 2007-2009 Lincoln MKZ All Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11329-002) fits 2007-2009 Lincoln MKZ models. The 2009 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2007-2009 Lincoln MKZ All Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11329-002) fits the following vehicles: 2007-2009 Lincoln MKZ. Always verify your specific year, make, and model before ordering.
The 2007-2009 Lincoln MKZ All Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11329-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 11329 is designed for Ford Fusion. However, drilling is required on each side for this model. You will also need to lower the mufflers and remove rubber plugs from the spare tire well during installation.
Yes, part number 11329 fits Mazda 6 models. Drilling is required on each side for the Mazda 6 sedan model, but no drilling is required for the Mazda 6 Sport Wagon variant. Both require lowering the mufflers and removing rubber plugs from the spare tire well.
Yes, part number 11329 is designed for 06 Lincoln Zephyr and 07-current MKZ models. The installation process is the same as other compatible vehicles: lower mufflers, remove rubber plugs from the spare tire well, and follow the standard installation steps. Some models may require drilling.
This hitch is designed for use with ball mount D-221.
The manual lists a gross load capacity of 2,000 lbs. trailer weight and 200 lbs. tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
The kit includes: 2× 1/2-13 UNC carriage bolts (1-1/4"), 2× 1/2-13 UNC carriage bolts (1-1/2"), 4× 1/2-13 UNC serrated flange nuts, 2× .250" × 1.00" × 2.00" square hole spacers, 2× .250" spacer plates, 2× M8×1.25 hex cap screws (30mm), 2× 5/16" flat washers, and 2× 5/16" lock washers.
The manual does not specify which tools are required. Contact Curt Technical Support at 1-866-287-8634 for a complete tool list.
Yes. Step 1 requires you to lower the mufflers and remove two 8mm hex bolts from the bumper beam, as well as remove 2 rubber plugs from the spare tire well.
Before installation, lower the mufflers, remove the two 8mm hex bolts from the bumper beam, and remove the 2 rubber plugs from the spare tire well. Some models may also require drilling and fascia trimming to provide clearance for the hitch.
1. Lower mufflers and remove two 8mm hex bolts from bumper beam and 2 rubber plugs from spare tire well. 2. Raise hitch into position over exhaust, aligning bumper beam weld nuts with each side plate. 3. Install supplied 8mm hex bolts, 5/16" lock washers, and 5/16" flat washers into bumper beam weld nuts. 4. Fishwire a 1/2" × 1-1/4" carriage bolt and CM-SP12 spacer into the bumper beam rail on both sides. 5. Install remaining 1/2" carriage bolts and round spacers into spare tire well and seal holes with silicone caulk. 6. Torque all 8mm fasteners to 23 ft-lbs and all 1/2" fasteners to 110 ft-lbs.
Drilling is required on each side for the Mazda 6 sedan model. No drilling is required for the Mazda 6 Sport Wagon. The manual does not specify the exact hole locations or sizes.
Yes, drilling is required on each side for the Ford Fusion model. The manual does not specify the exact hole locations or sizes.
Fascia trimming may be required to provide clearance for the hitch. The manual does not specify which models require trimming or the extent of trimming needed. Contact Curt Technical Support at 1-866-287-8634 for guidance specific to your vehicle.
Torque all 8mm fasteners to 23 ft-lbs.
Torque all 1/2" fasteners to 110 ft-lbs.
The manual instructs you to 'fishwire' a 1/2" × 1-1/4" carriage bolt and CM-SP12 spacer into the bumper beam rail on both sides, but does not define the term or explain the technique. Contact Curt Technical Support at 1-866-287-8634 for clarification.
Yes. After installing the remaining 1/2" carriage bolts and round spacers into the spare tire well, use silicone caulk or equivalent to seal the holes from exhaust fumes and water.
The hitch has a gross load capacity of 2,000 lbs. trailer weight and 200 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer loads can be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Ford Fusion, Mercury Milan, Mazda 6, 06 Lincoln Zephyr, and 07-current MKZ. Drilling is required on Mazda 6 sedan and Ford Fusion; no drilling on Mazda 6 Sport Wagon.
Drilling is required for Ford Fusion and Mazda 6 sedan models. No drilling is required for Mazda 6 Sport Wagon. Fascia trimming may also be required on some models.
Torque all 8mm fasteners to 23 ft-lbs and all 1/2" fasteners to 110 ft-lbs.
2,000 lbs. trailer weight and 200 lbs. tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Lower the mufflers, remove two 8mm hex bolts from the bumper beam, and remove 2 rubber plugs from the spare tire well. Some models may require drilling and fascia trimming.
On Sale Today
Original price was $507.85. Current price is $485.46.You save $22.39
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.